Skip to content
TrackPrep

Capacitors in Series and Parallel: Formulas, Solved Numericals and NEET Traps

In series, every capacitor carries the same charge and 1/C = 1/C1 + 1/C2; in parallel, every capacitor has the same voltage and C = C1 + C2. This NCERT-based guide explains both, solves NCERT examples and exercises step by step, covers energy stored and ends with 5 MCQs.

By Anmol Sharma9 min read

Cartoon student at a laptop: Capacitors in series and parallel

Capacitors in series and parallel: key highlights

Particulars Series combination Parallel combination
NCERT source Class 12 Physics, Chapter 2, section 2.14.1 Section 2.14.2
Same for every capacitor Charge Q Potential difference V
Shared between capacitors Voltage: V = V1 + V2 + … Charge: Q = Q1 + Q2 + …
Equivalent capacitance 1/C = 1/C1 + 1/C2 + … C = C1 + C2 + …
Result compared with parts Smaller than the smallest Larger than the largest
n identical capacitors (each C) C/n nC

In one line: In a series combination every capacitor holds the same charge and the reciprocals of capacitances add (1/C = 1/C1 + 1/C2 + …), while in a parallel combination every capacitor has the same voltage and the capacitances simply add (C = C1 + C2 + …).

📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.

Table of contents

Capacitance basics you need first

Quantity Formula Note
Capacitance C = Q/V Depends only on geometry (and the dielectric), not on Q or V
SI unit farad, 1 F = 1 C V⁻¹ 1 F is very large; pF and μF are common
Parallel plate (vacuum) C = ε0A/d ε0 = 8.85 × 10⁻¹² C² N⁻¹ m⁻²
With a dielectric filling the gap C = Kε0A/d Dielectric constant K > 1
Energy stored U = Q²/2C = ½CV² = ½QV Stored in the electric field between the plates

NCERT's sense of scale: for 1 F with a 1 cm gap, each plate would have to be about 30 km in length and breadth.

Capacitors in series

Setup: the left plate of C1 and the right plate of C2 are joined to the battery, and the inner plates are joined to each other.

Why the charge is the same: the inner plates must carry –Q and +Q. If not, the net charge on each capacitor would not be zero, and charge would flow through the connecting wire until it was.

  • Charge on each capacitor: Q (same)
  • Voltage: V = V1 + V2 = Q/C1 + Q/C2
  • Equivalent: 1/C = 1/C1 + 1/C2 + … + 1/Cn

Quick formulas

  • Two capacitors: C = C1C2/(C1 + C2)
  • Voltage divides in the inverse ratio of capacitance: V1/V2 = C2/C1. The smaller capacitor takes the larger voltage.

Example (computed): 2 μF and 3 μF in series across 10 V.

  • C = (2 × 3)/(2 + 3) = 1.2 μF
  • Q = CV = 1.2 × 10 = 12 μC on each
  • V1 = 12/2 = 6 V, V2 = 12/3 = 4 V (6 + 4 = 10 V ✓)

Capacitors in parallel

Setup: both capacitors are connected across the same two points, so the same potential difference is applied to each.

  • Voltage across each: V (same)
  • Charges: Q1 = C1V, Q2 = C2V (not necessarily equal)
  • Total charge: Q = Q1 + Q2
  • Equivalent: C = C1 + C2 + … + Cn

Charge divides in the direct ratio of capacitance: the bigger capacitor stores more charge.

Example (computed): 2 μF and 3 μF in parallel across 10 V.

  • C = 5 μF; Q1 = 20 μC, Q2 = 30 μC; total 50 μC

Series vs parallel at a glance

Feature Series Parallel
Common quantity Q V
Divides V (inversely with C) Q (directly with C)
C(eq) for 2 μF + 3 μF 1.2 μF 5 μF
Use To withstand a higher total voltage To store more charge at the same voltage
Compare resistors Like resistors in parallel Like resistors in series

Energy stored in a capacitor

NCERT derives the work done in charging a capacitor bit by bit:

U = Q²/2C = ½CV² = ½QV

  • The result does not depend on how the charge was built up, because the electrostatic force is conservative.
  • Energy density in the field: u = ½ε0E² (energy per unit volume).
  • For a combination, find C(eq) first, then use ½C(eq)V².

Energy loss on sharing (NCERT Example 2.10): a 900 pF capacitor charged to 100 V stores ½ × 900 × 10⁻¹² × 100² = 4.5 × 10⁻⁶ J. Joined to an identical uncharged 900 pF capacitor, the charge shares equally, V becomes 50 V and the total energy becomes 2.25 × 10⁻⁶ J. Half the energy is lost as heat and electromagnetic radiation during the transient current, though no charge is lost.

Solved numericals from NCERT

All answers were recomputed by script.

Problem (NCERT) Working Answer
Ex. 2.6: three 9 pF in series, 120 V 1/C = 3/9 → C = 3 pF; V each = 120/3 3 pF; 40 V each
Ex. 2.7: 2, 3, 4 pF in parallel, 100 V C = 2 + 3 + 4; Q = CV each 9 pF; 200, 300, 400 pC
Ex. 2.5: 8 pF, gap halved, K = 6 C' = 8 × 2 × 6 96 pF
Ex. 2.8: A = 6 × 10⁻³ m², d = 3 mm, 100 V C = ε0A/d; Q = CV ≈ 17.7 pF; ≈ 1.77 × 10⁻⁹ C
Ex. 2.10: 12 pF at 50 V U = ½CV² 1.5 × 10⁻⁸ J
Ex. 2.11: 600 pF at 200 V, joined to another 600 pF Uᵢ = 1.2 × 10⁻⁵ J; U_f = Uᵢ/2 6 × 10⁻⁶ J lost

NCERT Example 2.9 (mixed network): four 10 μF capacitors on a 500 V supply; C1, C2, C3 in series, and that group in parallel with C4.

  1. Series group: C' = 10/3 μF
  2. Add C4 in parallel: C = 10/3 + 10 = 13.3 μF
  3. Charge on C1, C2, C3: Q = (10/3 μF)(500 V) ≈ 1.7 × 10⁻³ C each
  4. Charge on C4: Q' = (10 μF)(500 V) = 5.0 × 10⁻³ C

Method for any network: spot the groups that are purely series or purely parallel, reduce them one at a time, and work back to find each charge and voltage.

NEET traps to remember

  • Series: same charge, not same voltage. Parallel: same voltage, not same charge.
  • Series C(eq) is less than the smallest capacitor; parallel C(eq) is more than the largest.
  • n identical capacitors: series C/n, parallel nC, so parallel/series = n².
  • Capacitors combine the opposite way to resistors.
  • Sharing charge loses energy (half, for two identical capacitors), but total charge is conserved.
  • Dielectric with battery connected: V fixed, so Q rises K times. Battery disconnected: Q fixed, so V falls to V/K.

Practice MCQs

1. Three capacitors of 9 pF each are connected in series. The equivalent capacitance is: (a) 27 pF (b) 9 pF (c) 3 pF (d) 1 pF

👉 Solve this and more Electrostatic Potential and Capacitance questions on TrackPrep

2. 2 μF and 3 μF capacitors are in series across 10 V. The voltage across the 2 μF capacitor is: (a) 4 V (b) 5 V (c) 6 V (d) 10 V

👉 Solve this and more Electrostatic Potential and Capacitance questions on TrackPrep

3. Three 6 μF capacitors: two in parallel, and this pair in series with the third. The equivalent capacitance is: (a) 2 μF (b) 4 μF (c) 9 μF (d) 18 μF

👉 Solve this and more Electrostatic Potential and Capacitance questions on TrackPrep

4. A 12 pF capacitor is connected to a 50 V battery. The energy stored is: (a) 3 × 10⁻¹⁰ J (b) 6 × 10⁻¹⁰ J (c) 1.5 × 10⁻⁸ J (d) 3 × 10⁻⁸ J

👉 Solve this and more Electrostatic Potential and Capacitance questions on TrackPrep

5. Four identical capacitors give C(p) in parallel and C(s) in series. C(p)/C(s) is: (a) 4 (b) 8 (c) 16 (d) 1/16

👉 Solve this and more Electrostatic Potential and Capacitance questions on TrackPrep

Answer key

Q Answer Why
1 (c) 1/C = 1/9 + 1/9 + 1/9 = 1/3 (NCERT Exercise 2.6)
2 (c) C = 1.2 μF, Q = 12 μC, V = 12/2 = 6 V
3 (b) 6 + 6 = 12 μF; then 12 × 6/(12 + 6) = 4 μF
4 (c) U = ½ × 12 × 10⁻¹² × 50² = 1.5 × 10⁻⁸ J (NCERT Exercise 2.10)
5 (c) 4C ÷ (C/4) = 16 = n²

Practise on TrackPrep

  • ✅ Page-wise NCERT MCQs for Electrostatic Potential and Capacitance, every Example and Exercise type
  • ✅ Chapter-wise and year-wise PYQs on capacitor networks, dielectrics and energy
  • ✅ Jojo, the AI teacher: photograph a tricky network and get it reduced step by step on a whiteboard
  • ✅ NTA-style CBT mocks and custom tests to time your Physics numericals

👉 Start practising free on TrackPrep

📲 Download the TrackPrep app for more practice: Get TrackPrep on Google Play

Related: Electrostatic Potential and Capacitance: NEET notes and questions · NEET 2027 Physics strategy for numericals · NEET Physics chapter-wise notes and questions

Practise for NEET on the TrackPrep app: get it on Google Play

Frequently asked questions

What is the formula for capacitors in series and parallel?

In series, 1/C = 1/C1 + 1/C2 + … and every capacitor carries the same charge. In parallel, C = C1 + C2 + … and every capacitor has the same voltage.

Why is the charge the same on capacitors in series?

The inner plates connected to each other must carry equal and opposite charges, otherwise the net charge on a capacitor would not be zero and charge would flow through the connecting wire until it was. So each capacitor carries the same Q.

Is equivalent capacitance in series less than each capacitor?

Yes. Because reciprocals add, the series equivalent is smaller than the smallest capacitor. In parallel, it is larger than the largest one.

What happens to energy when two capacitors share charge?

Total charge stays the same, but some energy is lost as heat and electromagnetic radiation during the brief current. For two identical capacitors, half the energy is lost, as in NCERT Example 2.10.

Last updated: 21 November 2026.

Tags:
  • chapter notes
  • topic
  • neet 2027
  • physics

← All articles