Skip to content
TrackPrep

Thermodynamics NEET Notes and Important Questions (Class 11 Chemistry)

Quick NEET revision of NCERT Class 11 Chemistry Chapter 5, Thermodynamics. Crisp notes on systems, first law, work, enthalpy, Hess's law, bond and lattice enthalpy, entropy and Gibbs energy, a full formula table, common traps and 8 NEET-style MCQs with an answer key.

By Anmol Sharma17 min read

Cartoon student at a laptop: Thermodynamics NEET notes and important questions, Class 11 Chemistry

Thermodynamics: key highlights

Particulars Details
Class and chapter NCERT Class 11 Chemistry, Chapter 5
Unit Chemical Thermodynamics
Key topics System and surroundings, first law and sign convention, work and reversible expansion, enthalpy and ΔH = ΔU + ΔngRT, Hess's law and types of enthalpy, entropy and the second and third laws, Gibbs energy and equilibrium
How NEET asks it short numericals (ΔH-ΔU, work, ΔG, K), sign-of-ΔH-and-ΔS tables, statement-based, assertion-reason
Revision time 60-75 minutes for these notes

In one line: Energy is conserved (ΔU = q + w), but the direction of change is decided by ΔG = ΔH − TΔS, which must be negative for a spontaneous process at constant T and p.

📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.

Table of contents

Download the NCERT PDF

Book Chapter Official PDF
NCERT Class 11 Chemistry Chapter 5: Thermodynamics 📥 Download Thermodynamics NCERT PDF (ncert.nic.in)

Read the official NCERT chapter alongside these notes. Every note and question on this page is based on it.

Short notes for quick revision

Scope of thermodynamics

  • Deals with energy changes of macroscopic systems (many molecules).
  • Concerned only with initial and final states, not with how fast or by what path a change happens.
  • Laws apply when a system is in equilibrium or moves from one equilibrium state to another.

System, surroundings and boundary

  • System: the part of the universe under observation. Surroundings: the part of the rest of the universe that can interact with it.
  • Universe = system + surroundings. The wall between them (real or imaginary) is the boundary.
  • Open system: exchanges energy and matter (reactants in an open beaker).
  • Closed system: exchanges energy only (closed vessel of copper or steel).
  • Isolated system: exchanges neither (reactants in a thermos flask).

State functions

  • State functions (p, V, T, U, H, S, G) depend only on the state, not on the path.
  • q and w are path dependent, but q + w = ΔU is not.
  • Only changes in internal energy (ΔU) can be measured, never its absolute value.

Internal energy, work and heat

  • Adiabatic process: no heat transfer (q = 0), so ΔU = wad.
  • Joule showed that the same adiabatic work produces the same change of state, whatever the way it is done, so U is a state function.
  • IUPAC sign convention: w and q are positive when added to the system (work done on the system, heat absorbed).
  • First law: ΔU = q + w. The energy of an isolated system is constant.

Pressure-volume work

  • Irreversible work against constant external pressure: w = −pex(Vf − Vi). In compression w is positive.
  • Reversible process: proceeds infinitely slowly through equilibrium states and can be reversed by an infinitesimal change.
  • Isothermal reversible work for an ideal gas: w = −2.303 nRT log(Vf/Vi).
  • Free expansion (into vacuum, pex = 0): no work is done, reversible or irreversible.
  • For isothermal expansion of an ideal gas into vacuum, w = 0, q = 0 and ΔU = 0.

Enthalpy

  • H = U + pV. ΔH = qp (heat at constant pressure); ΔU = qV (heat at constant volume).
  • ΔH = ΔU + ΔngRT, where Δng = moles of gaseous products − moles of gaseous reactants.
  • For solids and liquids only, ΔH ≈ ΔU (negligible volume change).
  • Exothermic: ΔH negative. Endothermic: ΔH positive.
  • Worked example: vaporisation of 1 mol water at 100 °C, ΔH = 41 kJ mol⁻¹, ΔU = 37.9 kJ mol⁻¹.

Extensive and intensive properties

  • Extensive (depend on amount): mass, volume, internal energy, enthalpy, heat capacity.
  • Intensive (independent of amount): temperature, density, pressure. Molar properties (Vm, Cm) are also independent of amount.
  • Halving a gas sample halves V but leaves T unchanged.

Heat capacity

  • q = CΔT. Water has a large heat capacity.
  • Molar heat capacity Cm = C/n; specific heat c: q = c × m × ΔT.
  • For an ideal gas, Cp − CV = R.

Calorimetry

  • Bomb calorimeter: constant volume, measures ΔU (qV). No work is done since ΔV = 0.
  • Constant-pressure calorimeter measures ΔH (qp), the heat of reaction ΔrH.
  • Example: 1 g graphite in a bomb calorimeter (C = 20.7 kJ K⁻¹, ΔT = 1 K) gives ΔU = −2.48 × 10² kJ mol⁻¹; Δng = 0 so ΔH = ΔU.

Reaction enthalpy and standard states

  • ΔrH = Σ ai ΔfH°(products) − Σ bi ΔfH°(reactants).
  • Standard state: the pure form of a substance at 1 bar at the specified temperature (data usually at 298 K).
  • ΔfH° of an element in its reference state (most stable form at 25 °C and 1 bar) is zero: H2(g), O2(g), C(graphite), S(rhombic).
  • ΔfH° refers to one mole of compound formed from elements. CaO + CO2 → CaCO3 is not a formation reaction; neither is H2 + Br2 → 2HBr (2 mol formed).
  • Phase changes at constant T: ΔfusH (water 6.00 kJ mol⁻¹), ΔvapH (water 40.79 kJ mol⁻¹), ΔsubH (dry ice 25.2, naphthalene 73.0 kJ mol⁻¹). All are positive.
  • Stronger intermolecular forces (H-bonds in water) → larger ΔvapH than acetone.

Thermochemical equations

  • Coefficients mean moles, never molecules.
  • Halving the equation halves ΔrH (enthalpy is extensive).
  • Reversing the equation reverses the sign of ΔrH.

Hess's law

  • ΔrH is the same whether the reaction occurs in one step or many: ΔrH = ΔrH1 + ΔrH2 + ΔrH3 + …
  • Classic use: C(graphite) + ½O2 → CO, ΔrH = −393.5 + 283.0 = −110.5 kJ mol⁻¹.
  • Same trick gives ΔfH of benzene from its ΔcH (−3267 kJ mol⁻¹) and ΔfH of CO2 and H2O.

Types of enthalpy

  • Combustion (ΔcH): always exothermic; butane −2658 kJ mol⁻¹, glucose −2802 kJ mol⁻¹.
  • Atomization (ΔaH): breaking one mole of bonds completely to gaseous atoms; for diatomic molecules it equals the bond dissociation enthalpy; for Na(s) → Na(g) it equals ΔsubH.
  • Bond dissociation enthalpy vs mean bond enthalpy: successive C–H bonds of CH4 need 427, 439, 452, 347 kJ mol⁻¹; mean C–H = 1665 ÷ 4 = 416 kJ mol⁻¹.
  • Gas-phase reactions: ΔrH = Σ bond enthalpies (reactants) − Σ bond enthalpies (products). This is approximate.
  • Lattice enthalpy (NaCl: +788 kJ mol⁻¹) is found indirectly by the Born-Haber cycle; the sum of enthalpy changes round a cycle is zero.
  • Solution: ΔsolH = ΔlatticeH + ΔhydH. For NaCl, +788 − 784 = +4 kJ mol⁻¹.
  • Dilution: enthalpy of solution depends on the amount of solvent; HCl reaches a limiting value of −74.85 kJ mol⁻¹ at infinite dilution.

Spontaneity and entropy

  • Spontaneous = has the potential to proceed without external help; says nothing about rate (H2 + O2 mixture).
  • A spontaneous process is irreversible.
  • Decrease in enthalpy alone is not the criterion: some endothermic reactions are spontaneous.
  • Entropy (S): measure of randomness. Crystalline solid = lowest; gas = highest.
  • ΔS = qrev/T. For a spontaneous process ΔStotal = ΔSsys + ΔSsurr > 0; at equilibrium ΔS = 0.
  • ΔSsurr = −ΔHsys/T. Example: rusting of iron has ΔSsys = −549.4 J K⁻¹ mol⁻¹, but ΔStotal = +4980.6 J K⁻¹ mol⁻¹, so it is spontaneous.
  • Second law: in an isolated system, increase of entropy is the natural direction of spontaneous change.
  • Third law: entropy of a pure crystalline substance approaches zero as T → 0 K (not true for solutions or supercooled liquids).

Gibbs energy

  • G = H − TS (extensive, state function). ΔG = ΔH − TΔS (Gibbs equation).
  • ΔG < 0 spontaneous; ΔG > 0 non-spontaneous; ΔG = 0 equilibrium.
  • ΔG is the energy available to do useful work ("free energy"); TΔS is energy not available for useful work.
  • ΔrG° = −RT ln K = −2.303 RT log K. Large negative ΔG° → K much larger than 1.

Formula table

Formula Meaning of symbols When to use
ΔU = q + w q = heat absorbed by system, w = work done on system (J) First-law numericals with IUPAC signs
w = −pex(Vf − Vi) pex = external pressure, V = volume (litre-atm or J) Irreversible expansion or compression
w = −2.303 nRT log(Vf/Vi) n = moles, R = 8.314 J K⁻¹ mol⁻¹, T in K Isothermal reversible work of ideal gas
H = U + pV; ΔH = ΔU + ΔngRT Δng = gaseous moles of products − reactants Converting bomb-calorimeter ΔU to ΔH
q = CΔT = c m ΔT C = heat capacity (J K⁻¹), c = specific heat (J g⁻¹ K⁻¹) Calorimetry, heating or cooling
Cp − CV = R molar heat capacities of an ideal gas Ideal-gas heat capacity questions
ΔrH = ΣaΔfH(products) − ΣbΔfH(reactants) a, b = stoichiometric coefficients Reaction enthalpy from formation data
ΔrH = ΣBE(reactants) − ΣBE(products) BE = bond enthalpy, kJ mol⁻¹ Gas-phase reaction enthalpy
ΔsolH = ΔlatticeH + ΔhydH kJ mol⁻¹ Enthalpy of solution of ionic solids
ΔS = qrev/T J K⁻¹ mol⁻¹ Entropy change; ΔSsurr = −ΔHsys/T
ΔG = ΔH − TΔS ΔG, ΔH in J or kJ; ΔS in J K⁻¹ (match units) Spontaneity; T at which ΔG = 0 is ΔH/ΔS
ΔG° = −2.303 RT log K K = equilibrium constant Linking ΔG° and K

Important tables and comparisons

Effect of temperature on spontaneity (NCERT Table 5.4)

ΔrH ΔrS ΔrG Result
− + − Spontaneous at all temperatures
− − − at low T, + at high T Spontaneous at low temperature
+ + + at low T, − at high T Spontaneous at high temperature
+ − + Non-spontaneous at all temperatures

Types of system

System Matter exchange Energy exchange Example
Open Yes Yes Reactants in an open beaker
Closed No Yes Reactants in a closed copper vessel
Isolated No No Reactants in a thermos flask

ΔU vs ΔH measurement

Quantity Condition Instrument Relation
ΔU Constant volume Bomb calorimeter ΔU = qV
ΔH Constant pressure Constant-pressure calorimeter ΔH = qp

Isothermal processes of an ideal gas

Process Work Heat
Free expansion w = 0 q = 0
Irreversible, against pex w = −pex(Vf − Vi) q = pex(Vf − Vi)
Reversible w = −2.303 nRT log(Vf/Vi) q = 2.303 nRT log(Vf/Vi)

Diagrams to revise

  • Fig. 5.2 open, closed and isolated systems: what crosses each boundary.
  • Fig. 5.5 p-V plots: work = shaded area for single-step, multi-step and reversible compression; reversible gives the area under the curve.
  • Fig. 5.7 bomb calorimeter: steel bomb in a water bath, constant volume, measures ΔU.
  • Fig. 5.9 Born-Haber cycle for NaCl: sublimation 108.4, ionization 496, ½ bond dissociation 121, electron gain −348.6, lattice 788 kJ mol⁻¹.
  • Fig. 5.10 enthalpy diagrams: exothermic products below reactants, endothermic above.
  • Fig. 5.11 diffusion of two gases: ΔH = 0 but entropy increases.

NEET traps in this chapter

  • ⚠️ Chemistry uses the IUPAC sign: work done on the system is positive. Physics books still use the old convention.
  • ⚠️ Adiabatic means q = 0, not w = 0 and not ΔT = 0.
  • ⚠️ Spontaneous does not mean fast; H2 and O2 can stay mixed for years.
  • ⚠️ ΔfH° of an element is zero only in its reference state (graphite, not diamond; rhombic sulphur).
  • ⚠️ The bomb calorimeter gives ΔU; convert with ΔH = ΔU + ΔngRT, counting only gaseous moles.
  • ⚠️ Heat capacity, enthalpy and internal energy are extensive; temperature, pressure and density are intensive.
  • ⚠️ Third law applies only to pure crystalline solids, not to solutions or supercooled liquids.
  • ⚠️ In ΔG = ΔH − TΔS, put ΔH and ΔS in the same energy unit (kJ with kJ K⁻¹, or J with J K⁻¹).

Practice questions

Try each question, then check the answer key below. Get instant answers and explanations for more Thermodynamics questions on TrackPrep.

Q1. For N2(g) + 3H2(g) → 2NH3(g) at 298 K, ΔH = −92.4 kJ mol⁻¹. Taking R = 8.314 J K⁻¹ mol⁻¹, ΔU for the reaction is approximately:

  • (A) −97.4 kJ mol⁻¹
  • (B) −87.4 kJ mol⁻¹
  • (C) −92.4 kJ mol⁻¹
  • (D) −89.9 kJ mol⁻¹

👉 Solve this and more Thermodynamics questions on TrackPrep

Q2. For a reaction, ΔH = +30 kJ mol⁻¹ and ΔS = +120 J K⁻¹ mol⁻¹. Assuming both are constant, the reaction becomes spontaneous above:

  • (A) 0.25 K
  • (B) 4000 K
  • (C) 25 K
  • (D) 250 K

👉 Solve this and more Thermodynamics questions on TrackPrep

Q3. The equilibrium constant of a reaction is 100 at 300 K. Taking R = 8.314 J K⁻¹ mol⁻¹, ΔG° for the reaction is approximately:

  • (A) −11.5 kJ mol⁻¹
  • (B) +11.5 kJ mol⁻¹
  • (C) −5.7 kJ mol⁻¹
  • (D) −26.5 kJ mol⁻¹

👉 Solve this and more Thermodynamics questions on TrackPrep

Q4. Which of the following is an intensive property?

  • (A) Enthalpy
  • (B) Heat capacity
  • (C) Density
  • (D) Internal energy

👉 Solve this and more Thermodynamics questions on TrackPrep

Q5. The heat measured for a combustion reaction in a bomb calorimeter is equal to:

  • (A) ΔU, because the volume is constant
  • (B) ΔH, because the pressure is constant
  • (C) ΔG, because no work is done
  • (D) TΔS, because heat is exchanged reversibly

👉 Solve this and more Thermodynamics questions on TrackPrep

Q6. How many of the following statements are correct?

  1. Heat (q) and work (w) are state functions.
  2. The standard enthalpy of formation of an element in its reference state is zero.
  3. In an adiabatic process, there is no transfer of work between system and surroundings.
  4. The entropy of a pure crystalline substance approaches zero as the temperature approaches absolute zero.
  5. Melting of a solid is an exothermic process.
  • (A) One
  • (B) Two
  • (C) Three
  • (D) Four

👉 Solve this and more Thermodynamics questions on TrackPrep

Q7. Match Column I (signs of ΔH and ΔS) with Column II (spontaneity).

Column I Column II
A. ΔH negative, ΔS positive i. Spontaneous only at high temperature
B. ΔH positive, ΔS negative ii. Spontaneous at all temperatures
C. ΔH positive, ΔS positive iii. Spontaneous only at low temperature
D. ΔH negative, ΔS negative iv. Non-spontaneous at all temperatures
  • (A) A-ii, B-i, C-iv, D-iii
  • (B) A-iv, B-ii, C-i, D-iii
  • (C) A-ii, B-iv, C-i, D-iii
  • (D) A-ii, B-iv, C-iii, D-i

👉 Solve this and more Thermodynamics questions on TrackPrep

Q8. Assertion (A): For a reaction involving only solids and liquids, ΔH and ΔU differ significantly.

Reason (R): Solids and liquids do not suffer any significant volume change on heating.

  • (A) Both A and R are true, and R is the correct explanation of A
  • (B) Both A and R are true, but R is not the correct explanation of A
  • (C) A is true, but R is false
  • (D) A is false, but R is true

👉 Solve this and more Thermodynamics questions on TrackPrep

Answer key

Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
B D A C A B C D
  • Q1: Δng = 2 − 4 = −2. ΔU = ΔH − ΔngRT = −92.4 − (−2)(8.314 × 298 × 10⁻³) = −92.4 + 4.96 = −87.4 kJ mol⁻¹.
  • Q2: ΔG = 0 at T = ΔH/ΔS = 30,000 J ÷ 120 J K⁻¹ = 250 K. Above 250 K, TΔS > ΔH and ΔG < 0.
  • Q3: ΔG° = −2.303 × 8.314 × 300 × log 100 = −2.303 × 8.314 × 300 × 2 = −11,488 J ≈ −11.5 kJ mol⁻¹.
  • Q6: Statements 2 and 4 are correct. Adiabatic means no transfer of heat; melting is endothermic.
  • Q8: Because volume changes are negligible, ΔH ≈ ΔU for solids and liquids, so A is false and R is true.

Got one wrong? Ask Jojo, the AI teacher, to explain it on a whiteboard: ask your doubt on TrackPrep

Practise Thermodynamics on TrackPrep

  • ✅ Page-wise NCERT MCQs for Thermodynamics, with explanations
  • ✅ Chapter-wise PYQs
  • ✅ NCERT line-by-line lecture by Anmol Sir
  • ✅ Jojo, the AI teacher, for any doubt, in Hindi, English or Hinglish

👉 Start practising Thermodynamics on TrackPrep

Previous chapter: Chemical Bonding and Molecular Structure · Next chapter: Equilibrium · All chapters: NEET Chemistry chapter-wise notes and questions

Practise for NEET on the TrackPrep app: get it on Google Play

Frequently asked questions

Is Thermodynamics important for NEET 2027?

Yes. NEET Chemistry has 45 questions (180 marks), and Thermodynamics gives short numericals plus concept questions on signs, state functions and spontaneity. Its ΔG° = −RT ln K link is also used again in Equilibrium and Electrochemistry.

Which topics of Thermodynamics should I revise first?

Revise the first law with sign convention, ΔH = ΔU + ΔngRT and Hess's law first. Then revise the Gibbs equation, Table 5.4 (signs of ΔH and ΔS) and ΔG° = −2.303 RT log K.

How do I revise Thermodynamics quickly before NEET?

Go through the formula table on this page and solve one numerical per formula. Keep a short list of zero values (ΔfH° of elements, free-expansion work, ΔU of an isolated system) and of which quantities are state functions.

Where can I practise more Thermodynamics questions?

TrackPrep has page-wise NCERT MCQs and chapter-wise PYQs for Thermodynamics, and Jojo, the AI teacher, explains any numerical step by step on a whiteboard, including photo doubts.

What is thermodynamics in chemistry?

Thermodynamics in chemistry is the study of energy changes, mainly heat and work, in chemical and physical processes of macroscopic systems. It deals only with the initial and final states, not with how fast a change happens. In NCERT Class 11 Chapter 5 it covers the first law (ΔU = q + w), enthalpy, Hess's law, entropy and Gibbs energy, which decides whether a reaction is spontaneous.

What is a thermodynamic system?

A thermodynamic system is the part of the universe under observation; the rest that can interact with it is the surroundings, and the wall between them is the boundary. An open system exchanges both energy and matter (reactants in an open beaker), a closed system exchanges only energy (a closed steel vessel), and an isolated system exchanges neither (reactants in a thermos flask).

What is the difference between thermodynamics and kinetics?

Thermodynamics tells whether a reaction can happen and how much energy changes, while kinetics tells how fast it happens. Thermodynamics looks only at the initial and final states, so a negative ΔG shows a reaction is spontaneous but says nothing about its rate. For example, a mixture of hydrogen and oxygen is spontaneous to form water but does not react noticeably at room temperature.

Which law of thermodynamics defines entropy?

Entropy is the subject of the second law of thermodynamics, which says that in an isolated system, an increase in entropy is the natural direction of spontaneous change. Entropy (S) is a measure of randomness, and its change is ΔS = qrev/T. The third law adds that the entropy of a pure crystalline substance approaches zero as the temperature approaches 0 K.

Last updated: 21 November 2026.

Tags:
  • chapter notes
  • chemistry
  • class 11
  • neet 2027
  • notes
  • thermodynamics

← All articles