Skip to content
TrackPrep

Haloalkanes and Haloarenes NEET Notes and Important Questions (Class 12 Chemistry)

Quick NEET revision of NCERT Class 12 Chemistry Chapter 6, Haloalkanes and Haloarenes. Classification, C–X bond, preparation, halogen exchange, SN1 and SN2 with stereochemistry, Zaitsev rule, Grignard and Wurtz, haloarenes, polyhalogen compounds and 8 NEET-style MCQs with an answer key.

By Anmol Sharma18 min read

Cartoon student at a laptop: Haloalkanes and Haloarenes NEET notes and important questions, Class 12 Chemistry

Haloalkanes and Haloarenes: key highlights

Particulars Details
Class and chapter NCERT Class 12 Chemistry, Chapter 6
Unit Haloalkanes and Haloarenes (Organic Chemistry)
Key topics Classification and naming, nature of the C–X bond, preparation from alcohols, hydrocarbons and halogen exchange, SN1 and SN2 with stereochemistry, elimination and Zaitsev rule, reactions with metals, reactions of haloarenes, polyhalogen compounds
How NEET asks it SN1/SN2 reactivity order, inversion vs racemisation, named reaction match, major product (KCN vs AgCN, Zaitsev), boiling point and density order, assertion-reason
Revision time 60-75 minutes for these notes

In one line: The polar C–X bond makes carbon a target for nucleophiles; steric crowding decides SN2, carbocation stability decides SN1, and resonance in haloarenes makes the C–X bond too strong to break easily.

📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.

Table of contents

Download the NCERT PDF

Book Chapter Official PDF
NCERT Class 12 Chemistry Chapter 6: Haloalkanes and Haloarenes 📥 Download Haloalkanes and Haloarenes NCERT PDF (ncert.nic.in)

Read the official NCERT chapter alongside these notes. Every note and question on this page is based on it.

Short notes for quick revision

Introduction and uses

  • Haloalkane: X on an sp3 carbon of an alkyl group. Haloarene: X on an sp2 carbon of an aryl group.
  • Chloramphenicol (from microorganisms) treats typhoid; thyroxine (iodine hormone), its deficiency causes goiter; chloroquine for malaria; halothane is an anaesthetic. Fully fluorinated compounds are being considered as blood substitutes.
  • Halogenated compounds persist in the environment because soil bacteria cannot break them down easily.

Classification

  • By number of halogens: mono, di, poly.
  • sp3 C–X:
    • Alkyl halides (CnH2n+1X): 1°, 2°, 3° by the carbon carrying X.
    • Allylic halides: X on an sp3 carbon next to C=C.
    • Benzylic halides: X on an sp3 carbon attached to an aromatic ring.
  • sp2 C–X: vinylic halides (X on a C=C carbon) and aryl halides (X directly on the ring).
  • Dihalides: gem (same carbon, common name alkylidene halide) and vic (adjacent carbons, alkylene dihalide); IUPAC: dihaloalkanes.

Nomenclature (Table 6.1 examples)

  • sec-Butyl chloride = 2-chlorobutane; neo-pentyl bromide = 1-bromo-2,2-dimethylpropane; tert-butyl bromide = 2-bromo-2-methylpropane.
  • Vinyl chloride = chloroethene; allyl bromide = 3-bromopropene; benzyl chloride = chlorophenylmethane.
  • CH2Cl2 dichloromethane, CHCl3 trichloromethane, CHBr3 tribromomethane, CCl4 tetrachloromethane.
  • C5H11Br has eight structural isomers: four 1°, three 2°, one 3° (2-bromo-2-methylbutane).

Nature of the C–X bond

  • Halogen is more electronegative: Cδ+–Xδ–, polar bond.
  • Size of X grows F → I, so bond length rises and bond enthalpy falls from C–F to C–I (Table 6.2).

Preparation of haloalkanes

  • From alcohols (best route):
    • Conc. halogen acid, phosphorus halides or thionyl chloride. SOCl2 is preferred: by-products SO2 and HCl are gases and escape, giving pure alkyl halide.
    • 1° and 2° alcohols + HCl need ZnCl2; 3° alcohols react by simply shaking with conc. HCl at room temperature.
    • Alkyl bromide: constant-boiling HBr (48%). Alkyl iodide: NaI or KI in 95% orthophosphoric acid.
    • Reactivity of alcohols with a given haloacid: 3° > 2° > 1°.
    • PBr3 and PI3 are made in situ from red phosphorus with Br2 or I2.
    • Not usable for aryl halides: the C–O bond of phenol has partial double bond character.
  • From alkanes: free radical chlorination/bromination gives a mixture of isomers, so low yield of any one product. (CH3)2CHCH2CH3 has four kinds of H → four monochloro isomers.
  • From alkenes: HX addition (Markovnikov for propene); Br2 in CCl4 → colourless vic-dibromide, reddish-brown colour discharged = test for C=C.
  • Halogen exchange:
    • Finkelstein: R–Cl/R–Br + NaI in dry acetone → R–I; NaCl/NaBr precipitates and drives the reaction forward (Le Chatelier).
    • Swarts: R–Cl/R–Br heated with AgF, Hg2F2, CoF2 or SbF3 → R–F.

Preparation of haloarenes

  • Electrophilic substitution: Cl2 or Br2 with Lewis acid (Fe or FeCl3); o- and p- isomers separated by their big melting point difference. Iodination is reversible and needs an oxidising agent (HNO3, HIO4). Fluoro compounds are not made this way (fluorine too reactive).
  • Sandmeyer reaction: ArNH2 + NaNO2 in cold mineral acid → diazonium salt; with CuCl or CuBr → Ar–Cl or Ar–Br. For iodine, just shake with KI (no cuprous halide).

Physical properties

  • Pure alkyl halides are colourless; bromides and iodides develop colour in light. Volatile ones smell sweet.
  • CH3Cl, CH3Br, C2H5Cl and some chlorofluoromethanes are gases at room temperature.
  • Boiling points higher than hydrocarbons of comparable mass (dipole-dipole + van der Waals).
  • b.p.: RI > RBr > RCl > RF. Branching lowers b.p.: 2-bromo-2-methylpropane is lowest of its isomers.
  • Isomeric dihalobenzenes: nearly the same b.p., but the para isomer has the higher melting point (symmetry, better crystal packing).
  • Very slightly soluble in water (new attractions weaker than water's H-bonds); dissolve in organic solvents.
  • Bromo, iodo and polychloro derivatives are heavier than water; density rises with more C atoms, more X atoms and heavier X.

Nucleophilic substitution (Table 6.4)

  • Nucleophile replaces X (the leaving group) on the δ+ carbon.
  • Ambident nucleophiles: CN– and NO2–.
    • KCN (ionic) → attack through C → alkyl cyanide (C–C bond more stable). AgCN (covalent) → attack through N → isocyanide.
    • KNO2 → alkyl nitrite (R–O–N=O). AgNO2 → nitroalkane (R–NO2).
  • Other products: NaOH → alcohol, NaOR' → ether, NH3 → amine, R'COOAg → ester, LiAlH4 → hydrocarbon.

SN2 mechanism

  • CH3Cl + OH– → CH3OH: second order, rate depends on both reactants; proposed by Hughes and Ingold (1937).
  • One step, no intermediate; transition state has carbon bonded to five atoms (three C–H in one plane).
  • Nucleophile attacks from the side opposite the halogen → inversion of configuration (umbrella turned inside out).
  • Steric hindrance controls rate: CH3X > 1° > 2° > 3°.
  • (–)-2-Bromooctane + NaOH → (+)-octan-2-ol with inverted configuration.

SN1 mechanism

  • Polar protic solvents (water, alcohol, acetic acid). (CH3)3CBr + OH–: first order, rate depends only on the alkyl halide.
  • Two steps: slow, reversible C–Br cleavage to a carbocation (energy from solvation of the halide ion), then fast attack by the nucleophile.
  • More stable carbocation → faster: 3° > 2° > 1° > CH3X. Allylic and benzylic halides are very reactive (resonance-stabilised cation).
  • Planar (sp2) carbocation is attacked from both sides → racemisation: optically active 2-bromobutane → (±)-butan-2-ol.
  • For the same alkyl group, both mechanisms: R–I > R–Br > R–Cl >> R–F.

Stereochemistry basics

  • Optically active compounds rotate plane polarised light (Nicol prism; measured by polarimeter). Clockwise = dextrorotatory (d, +); anticlockwise = laevorotatory (l, –).
  • Pasteur (1848): mirror-image crystals. Van't Hoff and Le Bel (1874): tetrahedral carbon; four different groups = asymmetric carbon / stereocentre.
  • Chiral = non-superimposable on its mirror image (optically active); achiral = superimposable. Propan-2-ol is achiral; butan-2-ol and 2-chlorobutane are chiral.
  • Enantiomers: identical m.p., b.p., refractive index; differ only in the direction of rotation.
  • Racemic mixture (dl or ±): equal amounts, zero rotation. Racemisation: converting an enantiomer into a racemic mixture.
  • Retention: no bond to the stereocentre breaks, configuration kept; e.g. (–)-2-methylbutan-1-ol + conc. HCl. Sign of rotation can still change.

Elimination and competition

  • Haloalkane with β-hydrogen + alcoholic KOH → alkene (β-elimination, dehydrohalogenation).
  • Zaitsev (Saytzeff) rule (1875): preferred alkene has more alkyl groups on the double-bonded carbons. 2-Bromopentane → pent-2-ene (major).
  • Substitution vs elimination: bulky nucleophiles act as bases (elimination). 1° → SN2; 2° → SN2 or elimination; 3° → SN1 or elimination.

Reaction with metals

  • Grignard reagent RMgX (Victor Grignard, 1900; Nobel 1912 with Paul Sabatier): haloalkane + Mg in dry ether. C–Mg bond covalent but highly polar; Mg–X essentially ionic.
  • Reacts with any proton source (water, alcohols, amines) → hydrocarbon, so moisture must be avoided.
  • Wurtz: R–X + Na in dry ether → alkane with double the carbons.
  • Wurtz-Fittig: alkyl halide + aryl halide + Na → alkylarene. Fittig: aryl halide + Na → two aryl groups joined.

Reactions of haloarenes

  • Much less reactive towards nucleophilic substitution because:
    • Resonance: C–Cl gets partial double bond character.
    • sp2 carbon holds the bond pair tighter; C–Cl is 169 pm in haloarene vs 177 pm in haloalkane.
    • Phenyl cation is not resonance-stabilised, so SN1 is ruled out.
    • Electron-rich nucleophile is repelled by the electron-rich ring.
  • Chlorobenzene + aqueous NaOH at 623 K and 300 atm → phenol.
  • –NO2 at ortho/para increases reactivity (stabilises the carbanion by resonance); no effect at meta.
  • Electrophilic substitution (halogenation, nitration, sulphonation, Friedel-Crafts): halogen is slightly deactivating but o,p-directing. –I effect controls reactivity; resonance controls orientation.

Polyhalogen compounds

  • Dichloromethane: paint remover, aerosol propellant, drug-making and metal-cleaning solvent; harms the central nervous system, burns skin and cornea.
  • Chloroform: solvent for fats, alkaloids, iodine; main use making freon R-22; old anaesthetic. About 900 ppm in air causes dizziness, fatigue, headache. Oxidised by air in light to phosgene (carbonyl chloride), so stored in closed dark bottles filled completely.
  • Iodoform: old antiseptic; action due to liberated free iodine; replaced because of its smell.
  • CCl4: refrigerants, propellants, CFC feedstock; once a cleaning fluid and fire extinguisher. Possible liver cancer, irregular heartbeat; in air it depletes the ozone layer.
  • Freons (CFCs of methane and ethane): stable, unreactive, non-toxic, easily liquefied. Freon 12 = CCl2F2, made from CCl4 by Swarts reaction. In the stratosphere they start radical chains that upset ozone balance.
  • DDT: first chlorinated insecticide, made 1873; insecticidal action found by Paul Muller (1939), Nobel 1948. Insects became resistant, toxic to fish, stored in fatty tissues; banned in the US in 1973.

Formula table

Formula Meaning of symbols When to use
CnH2n+1X n = number of carbons, X = halogen molar mass, isomer and homologous series questions
Rate (SN2) = k [R–X] [Nu–] second order, one step identifying SN2; effect of doubling [Nu–]
Rate (SN1) = k [R–X] first order, carbocation step is slow identifying SN1; [Nu–] has no effect
2R–X + 2Na → R–R + 2NaX (dry ether) Wurtz; product has double the carbons mass or moles of alkane formed
R–X + Mg → RMgX (dry ether); RMgX + H2O → RH + Mg(OH)X Grignard formation and hydrolysis converting R–X into alkane
ROH + SOCl2 → RCl + SO2 + HCl thionyl chloride route pure alkyl chloride, gaseous by-products
% X = (mass of X in formula / molar mass) × 100 composition by mass % halogen in CHCl3, CCl4, freons

Important tables and comparisons

C–X bond data (Table 6.2)

Bond Bond length (pm) Bond enthalpy (kJ mol–1) Dipole moment (D)
CH3–F 139 452 1.847
CH3–Cl 178 351 1.860
CH3–Br 193 293 1.830
CH3–I 214 234 1.636

SN1 vs SN2

Feature SN2 SN1
Kinetics Second order First order
Steps One, no intermediate Two, carbocation intermediate
Reactivity order CH3X > 1° > 2° > 3° 3° > 2° > 1° > CH3X
Controlled by Steric hindrance Carbocation stability
Stereochemistry (optically active R–X) Inversion Racemisation
Example CH3Cl + OH– (CH3)3CBr + OH–

Named reactions in this chapter

Reaction Reagent and condition Product
Finkelstein NaI, dry acetone Alkyl iodide
Swarts AgF, Hg2F2, CoF2 or SbF3 Alkyl fluoride
Sandmeyer Diazonium salt + CuCl or CuBr Aryl chloride or bromide
Wurtz Na, dry ether Alkane with double the carbons
Wurtz-Fittig Alkyl + aryl halide, Na, dry ether Alkylarene
Fittig Aryl halide, Na, dry ether Biaryl (two aryl groups joined)
Grignard Mg, dry ether RMgX

Density of haloalkanes (Table 6.3)

Compound Density (g/mL)
n-C3H7Cl 0.89
n-C3H7Br 1.335
n-C3H7I 1.747
CH2Cl2 1.336
CHCl3 1.489
CCl4 1.595

Diagrams to revise

  • Fig. 6.1 Boiling points of alkyl halides: rise with size of R and of X (RI highest).
  • Fig. 6.2 SN2 transition state: OH– enters opposite to the leaving Cl–; three C–H in one plane; inversion.
  • Fig. 6.3 Steric effects in SN2: methyl fastest, tertiary slowest.
  • SN1 steps: slow ionisation to planar carbocation, then attack from both faces.
  • Fig. 6.5 and 6.6: propan-2-ol (achiral, superimposable) vs butan-2-ol (chiral, enantiomers).
  • Resonance structures of chlorobenzene: partial C=Cl character; negative charge density at o and p.
  • Nitro-substituted carbanion: –NO2 at o/p carries the negative charge; at meta it cannot.

NEET traps in this chapter

  • ⚠️ KCN gives cyanide, AgCN gives isocyanide; KNO2 gives nitrite, AgNO2 gives nitroalkane.
  • ⚠️ SN2 reactivity is 1° > 2° > 3°; SN1 is the reverse. Methyl halides are fastest in SN2.
  • ⚠️ SN2 on an optically active halide gives inversion; SN1 gives racemisation.
  • ⚠️ Thionyl chloride is preferred because its by-products are gases, not because it is fastest.
  • ⚠️ Boiling point order is RI > RBr > RCl > RF, but branching lowers it; the para-dihalobenzene has the higher melting point, not boiling point.
  • ⚠️ Halogens on benzene are deactivating yet o,p-directing.
  • ⚠️ –NO2 speeds up nucleophilic substitution of haloarenes only at ortho/para, not meta.
  • ⚠️ Fluoroarenes are not made by direct fluorination; aryl iodides by Sandmeyer need only KI, no cuprous salt.

Practice questions

Try each question, then check the answer key below. Get instant answers and explanations for more Haloalkanes and Haloarenes questions on TrackPrep.

Q1. 21.8 g of bromoethane (C2H5Br, molar mass 109 g mol–1) is treated with sodium in dry ether. Assuming complete Wurtz reaction, the mass of n-butane (molar mass 58 g mol–1) formed is:

  • (A) 2.9 g
  • (B) 5.8 g
  • (C) 11.6 g
  • (D) 4.4 g

👉 Solve this and more Haloalkanes and Haloarenes questions on TrackPrep

Q2. The number of structural isomers possible for the molecular formula C5H11Br is:

  • (A) 5
  • (B) 6
  • (C) 7
  • (D) 8

👉 Solve this and more Haloalkanes and Haloarenes questions on TrackPrep

Q3. The percentage of chlorine by mass in chloroform (CHCl3; C = 12, H = 1, Cl = 35.5) is about:

  • (A) 29.7%
  • (B) 59.4%
  • (C) 89.1%
  • (D) 92.2%

👉 Solve this and more Haloalkanes and Haloarenes questions on TrackPrep

Q4. An alkyl halide reacts with AgCN. The main product is:

  • (A) Alkyl isocyanide
  • (B) Alkyl cyanide
  • (C) Alcohol
  • (D) Primary amine

👉 Solve this and more Haloalkanes and Haloarenes questions on TrackPrep

Q5. Hydrolysis of optically active 2-bromobutane by the SN1 mechanism gives:

  • (A) Butan-2-ol with complete inversion of configuration
  • (B) (±)-Butan-2-ol, a racemic mixture
  • (C) Butan-2-ol with complete retention of configuration
  • (D) But-2-ene only

👉 Solve this and more Haloalkanes and Haloarenes questions on TrackPrep

Q6. How many of the following statements are correct?

  1. Thionyl chloride is preferred for making alkyl chlorides from alcohols because SO2 and HCl formed are gases and escape.
  2. For the same alkyl group, the boiling points follow the order RF > RCl > RBr > RI.
  3. p-Dichlorobenzene has a higher melting point than its ortho and meta isomers.
  4. Chlorobenzene is converted to phenol by aqueous NaOH at 623 K and 300 atm.
  • (A) One
  • (B) Two
  • (C) Three
  • (D) Four

👉 Solve this and more Haloalkanes and Haloarenes questions on TrackPrep

Q7. Match the reaction in Column I with its reagent or feature in Column II.

Column I Column II
A. Finkelstein reaction i. Diazonium salt with cuprous chloride
B. Swarts reaction ii. NaI in dry acetone
C. Sandmeyer reaction iii. Aryl halide with Na in dry ether, two aryl groups joined
D. Fittig reaction iv. Heating with a metallic fluoride such as SbF3
  • (A) A-iv, B-ii, C-i, D-iii
  • (B) A-ii, B-iv, C-i, D-iii
  • (C) A-ii, B-iv, C-iii, D-i
  • (D) A-i, B-iv, C-ii, D-iii

👉 Solve this and more Haloalkanes and Haloarenes questions on TrackPrep

Q8. Assertion (A): Haloarenes are much less reactive than haloalkanes towards nucleophilic substitution.

Reason (R): Due to resonance, the C–X bond in haloarenes acquires partial double bond character.

  • (A) Both A and R are true, and R is the correct explanation of A.
  • (B) Both A and R are true, but R is not the correct explanation of A.
  • (C) A is true, but R is false.
  • (D) A is false, but R is true.

👉 Solve this and more Haloalkanes and Haloarenes questions on TrackPrep

Answer key

Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
B D C A B C B A

Got one wrong? Ask Jojo, the AI teacher, to explain it on a whiteboard: ask your doubt on TrackPrep

Practise Haloalkanes and Haloarenes on TrackPrep

  • ✅ Page-wise NCERT MCQs for Haloalkanes and Haloarenes, with explanations
  • ✅ Chapter-wise PYQs
  • ✅ NCERT line-by-line lecture by Anmol Sir
  • ✅ Jojo, the AI teacher, for any doubt, in Hindi, English or Hinglish

👉 Start practising Haloalkanes and Haloarenes on TrackPrep

Previous chapter: Coordination Compounds · Next chapter: Alcohols, Phenols and Ethers · All chapters: NEET Chemistry chapter-wise notes and questions

Practise for NEET on the TrackPrep app: get it on Google Play

Deep dives for this chapter

Frequently asked questions

Is Haloalkanes and Haloarenes important for NEET 2027?

Yes. Chemistry in NEET has 45 questions (180 marks), and this chapter is the base of Class 12 organic chemistry: SN1, SN2, elimination and Grignard reagents come back in alcohols, aldehydes and amines.

Which topics of Haloalkanes and Haloarenes should I revise first?

Start with SN1 vs SN2 (reactivity order, kinetics, inversion vs racemisation), then Table 6.4 products (KCN vs AgCN, KNO2 vs AgNO2), then the named reactions. Finish with reactions of haloarenes and the polyhalogen compounds.

How do I revise Haloalkanes and Haloarenes quickly before NEET?

Use the SN1 vs SN2 table and the named reactions table, write the reactivity orders once from memory, and solve a few product-prediction and Wurtz stoichiometry questions. End with the NEET traps list.

Where can I practise more Haloalkanes and Haloarenes questions?

On TrackPrep you get page-wise NCERT MCQs, chapter-wise PYQs and custom tests for this chapter. If a mechanism or product confuses you, ask Jojo, the AI teacher, for a whiteboard explanation in Hindi, English or Hinglish.

What is the difference between haloalkanes and haloarenes?

In haloalkanes the halogen is attached to an sp³ hybridised carbon of an alkyl group, while in haloarenes it is attached to an sp² hybridised carbon of an aryl (aromatic) group. Haloalkanes (alkyl halides) are formed when hydrogen atoms of an aliphatic hydrocarbon are replaced by halogen, and haloarenes (aryl halides) when hydrogen atoms of an aromatic hydrocarbon are replaced. Because of this, haloarenes are much less reactive than haloalkanes towards nucleophilic substitution.

How are haloalkanes and haloarenes classified?

They are classified first by the number of halogen atoms, as mono-, di- or polyhalogen compounds. They are then grouped by the carbon carrying the halogen: sp³ C–X compounds include alkyl halides (1°, 2°, 3°), allylic halides and benzylic halides, while sp² C–X compounds include vinylic halides and aryl halides. Dihalides are further called gem-dihalides when both halogens are on the same carbon and vic-dihalides when they are on adjacent carbons.

Why are haloarenes less reactive than haloalkanes towards nucleophilic substitution?

Haloarenes are much less reactive because their C–X bond is stronger and harder to break. Resonance gives the C–Cl bond in chlorobenzene partial double bond character, and the sp² carbon holds the bond pair more tightly, so the C–Cl bond is shorter (169 pm) than in a haloalkane (177 pm). Also, the phenyl cation formed by losing the halide would not be stabilised by resonance, so the SN1 route is ruled out.

Why are haloalkanes insoluble in water?

Haloalkanes are only very slightly soluble in water because dissolving them costs more energy than it gives back. Energy is needed to break the hydrogen bonds between water molecules and the attractions between haloalkane molecules, but the new attractions formed between haloalkane and water are weaker than those original hydrogen bonds. They do dissolve in organic solvents, where the new attractions are about as strong as the ones broken.

Last updated: 21 November 2026.

Tags:
  • chemistry
  • class 12
  • neet 2027
  • notes
  • haloalkanes and haloarenes

← All articles