Skip to content
TrackPrep

Interference vs Diffraction of Light: Difference, Formulas and NEET Traps (Wave Optics)

Interference and diffraction both create bright and dark bands, but they come from different set-ups and give different patterns. This NCERT-based guide compares Young's double slit and the single slit in tables, gives every condition and formula, solves an NCERT numerical and ends with 5 MCQs.

By Anmol Sharma8 min read

Cartoon student at a laptop: Interference vs Diffraction for NEET 2027

Interference vs diffraction: key highlights

Particulars Interference Diffraction
NCERT source Class 12 Physics, Chapter 10 (Wave Optics), Sections 10.4-10.5 Same chapter, Section 10.6
Set-up in NCERT Young's double slit: two coherent sources Single slit of width a
What adds up Waves from a few (two) sources Waves from many points of the same wavefront
Pattern Equally spaced bright and dark fringes Broad central maximum, weaker secondary maxima
Dark condition Path difference (n + ½)λ Minima at θ ≈ nλ/a (n = ±1, ±2, ...)
Energy Redistributed, not lost Redistributed, not lost

In one line: Interference is the superposition of waves from two (or a few) coherent sources and gives equally spaced fringes, while diffraction is the bending and spreading of a wave past a slit or edge, where many secondary sources on one wavefront combine to give a broad central maximum with weaker side bands.

📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.

Table of contents

Interference: two coherent sources

  • Superposition principle: the resultant displacement at a point is the vector sum of the displacements of each wave.
  • Coherent sources: the phase difference between them does not change with time. Two separate sodium lamps are incoherent, so their intensities simply add and no fringes are seen.
  • Young's trick: light from one pinhole S falls on two close pinholes S1 and S2. Any phase change in S reaches both equally, so S1 and S2 are locked in phase (coherent).
Condition Path difference (S1P ~ S2P) Phase difference Intensity
Constructive (bright) nλ (n = 0, 1, 2, ...) 2nπ 4I₀
Destructive (dark) (n + ½)λ (2n + 1)π 0
Any point – φ I = 4I₀ cos²(φ/2)

Fringe positions on the screen (screen distance D, slit separation d):

  • Bright: x = nλD/d
  • Dark: x = (n + ½)λD/d
  • Spacing between two neighbouring bright (or dark) fringes, often called fringe width: β = λD/d. NCERT notes that dark and bright fringes are equally spaced.

Diffraction: light bending around a slit

  • Near the edge of a shadow there are alternate dark and bright regions. This is diffraction, shown by all waves: sound, light, water and matter waves.
  • We rarely notice it for light because its wavelength is much smaller than everyday obstacles. The colours seen on a CD are a diffraction effect.
  • Single slit of width a: each part of the wavefront in the slit acts as a secondary source, all in phase. Their contributions add with different path differences.
Feature (single slit) Position
Central maximum θ = 0
Minima (zero intensity) θ ≈ nλ/a, n = ±1, ±2, ±3, ...
Secondary maxima θ ≈ (n + ½)λ/a, getting weaker as n increases
Angular width of central maximum From –λ/a to +λ/a, i.e. 2λ/a

Practical consequences (NCERT): diffraction sets the limit of resolution of the eye, telescopes and microscopes, and it defines the limits of ray optics. A wider slit gives a narrower pattern; red light gives wider fringes than blue.

Try it at home (NCERT 10.6.2): hold two razor blades to make a narrow slit and look at a straight bulb filament. You will see diffraction bands, coloured at the edges because their positions (except the central one) depend on wavelength.

Difference between interference and diffraction: full table

Basis Interference (YDSE) Diffraction (single slit)
Cause Superposition of waves from two coherent sources Superposition of waves from different parts of one wavefront
Number of sources Few (two) Very large (every point of the slit)
Fringe width All fringes equally spaced, β = λD/d Central maximum is twice as wide as the others
Brightness of bright bands Ideally all equal (4I₀) Central maximum brightest; others fall off quickly
Dark bands Ideally zero intensity Zero intensity at θ = nλ/a
Depends on Slit separation d Slit width a
Condition for maximum Path difference nλ Central at θ = 0; secondary near (n + ½)λ/a
Condition for minimum Path difference (n + ½)λ θ = nλ/a

A fair warning from NCERT: quoting Richard Feynman, NCERT says there is no sharp physical difference between the two. Roughly, with a few interfering sources we call it interference; with a large number we call it diffraction. In the double-slit experiment, the pattern you see is actually single-slit diffraction from each slit combined with double-slit interference.

Solved numerical (NCERT Exercise 10.4)

Question: In Young's double-slit experiment, d = 0.28 mm and D = 1.4 m. The distance between the central bright fringe and the fourth bright fringe is 1.2 cm. Find λ.

Step Working
Formula x₄ = 4λD/d
Rearrange λ = x₄ d/(4D)
Substitute λ = (1.2 × 10⁻² m)(0.28 × 10⁻³ m)/(4 × 1.4 m)
Answer λ = 6.0 × 10⁻⁷ m = 600 nm

NEET traps to remember

  • Two independent bulbs never give a steady interference pattern. The sources must be coherent.
  • Interference fringes are equally spaced; diffraction bands are not. The central diffraction maximum is twice as wide.
  • Diffraction minima use nλ/a, which looks like the interference maxima formula. Do not swap them.
  • Energy is conserved. Dark regions lose energy that bright regions gain.
  • Polarisation, not interference or diffraction, proves light is transverse. Interference and diffraction occur even for sound (longitudinal).

Practice MCQs

1. Two separate sodium lamps illuminate two pinholes. On the screen you will see: (a) Sharp fringes (b) No fringes, intensities just add (c) Only dark fringes (d) Diffraction only

👉 Solve this and more Wave Optics questions on TrackPrep

2. In YDSE, the intensity at a point where the phase difference is zero, if each slit gives intensity I₀, is: (a) I₀ (b) 2I₀ (c) 4I₀ (d) 0

👉 Solve this and more Wave Optics questions on TrackPrep

3. For a single slit of width a, the first minimum occurs at θ ≈: (a) λ/2a (b) λ/a (c) 2λ/a (d) 3λ/2a

👉 Solve this and more Wave Optics questions on TrackPrep

4. In YDSE, if the slit separation is doubled and the screen distance is halved, the fringe spacing becomes: (a) Same (b) Double (c) One-fourth (d) Four times

👉 Solve this and more Wave Optics questions on TrackPrep

5. Which phenomenon is shown only by transverse waves? (a) Interference (b) Diffraction (c) Polarisation (d) Reflection

👉 Solve this and more Wave Optics questions on TrackPrep

Answer key

Q Answer Why
1 (b) Independent lamps are incoherent (NCERT Fig. 10.11)
2 (c) Amplitude doubles, so intensity becomes 4I₀
3 (b) Minima at θ = nλ/a with n = 1
4 (c) β = λD/d → (D/2)/(2d) = β/4
5 (c) NCERT: polarisation is special to transverse waves

Practise on TrackPrep

  • ✅ Page-wise NCERT MCQs for Wave Optics, from Huygens' principle to polarisation
  • ✅ Chapter-wise and year-wise PYQs on YDSE and single-slit numericals
  • ✅ Jojo, the AI teacher, draws fringe patterns on a whiteboard and explains them in Hindi, English or Hinglish
  • ✅ Flashcards and Mistake Book for the max/min condition mix-ups

👉 Start practising free on TrackPrep

📲 Download the TrackPrep app for more practice: Get TrackPrep on Google Play

Related: Wave Optics: NEET notes and questions · NEET Physics chapter-wise notes and questions

Practise for NEET on the TrackPrep app: get it on Google Play

Frequently asked questions

What is the main difference between interference and diffraction?

Interference comes from the superposition of waves from two coherent sources and gives equally spaced fringes. Diffraction comes from waves from many points of the same wavefront at a slit or edge and gives a broad central maximum with weaker side bands.

Why are coherent sources needed for interference?

Only when the phase difference stays constant with time does the interference term survive on average. With incoherent sources the pattern shifts so fast that you see only the sum of intensities.

Why don't we see diffraction of light every day?

Light's wavelength is much smaller than most everyday obstacles, so the bending is tiny. It shows up with narrow slits, at shadow edges and on CDs.

Is energy lost in dark fringes?

No. Energy is only redistributed: what a dark region loses, a bright region gains, so energy is conserved.

Last updated: 21 November 2026.

Tags:
  • chapter notes
  • difference between
  • neet 2027
  • physics

← All articles