Thermodynamics NEET Notes and Important Questions (Class 11 Physics)
Quick NEET revision for Thermodynamics (NCERT Class 11 Physics, Chapter 11): zeroth law, heat vs internal energy vs work, first law, Cp − Cv = R, isothermal, adiabatic, isochoric and isobaric processes, second law, Carnot engine, a formula table, traps and 8 NEET-style questions.
By Anmol Sharma16 min read

Thermodynamics: key highlights
| Particulars | Details |
|---|---|
| Class and chapter | NCERT Class 11 Physics, Chapter 11 |
| Unit | Thermodynamics |
| Key topics | Zeroth law and temperature, heat, internal energy and work, first law, specific heats and Cp − Cv = R, thermodynamic processes, second law, reversible and irreversible processes, Carnot engine |
| How NEET asks it | Numericals (first law with signs, work in processes, Carnot efficiency), P-V graphs, statement-based, match-the-column, assertion-reason |
| Revision time | 45-60 minutes for these notes |
In one line: ΔQ = ΔU + ΔW, where only ΔU is a state variable, and no engine between T₁ and T₂ can beat the Carnot efficiency 1 − T₂/T₁.
📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.
Table of contents
- Download the NCERT PDF
- Short notes for quick revision
- Important tables and comparisons
- Diagrams to revise
- NEET traps in this chapter
- Practice questions
- Answer key
- Practise Thermodynamics on TrackPrep
- Frequently asked questions
Download the NCERT PDF
| Book | Chapter | Official PDF |
|---|---|---|
| NCERT Class 11 Physics | Chapter 11: Thermodynamics | 📥 Download Thermodynamics NCERT PDF (ncert.nic.in) |
Read the official NCERT chapter alongside these notes. Every note and question on this page is based on it.
Short notes for quick revision
What thermodynamics is
- Branch of physics dealing with heat, temperature and the inter-conversion of heat and other forms of energy.
- It is a macroscopic science: it uses bulk variables (P, V, T, mass, composition), not molecular details.
- Count Rumford (1798): boring a brass cannon produced heat that depended on the work done, not on the drill's sharpness. This disproved the caloric (heat-fluid) picture.
- Mechanics deals with motion of the body as a whole; thermodynamics deals with its internal state. A fast bullet is not hotter because of its speed.
Thermal equilibrium and the zeroth law
- Thermodynamic equilibrium: macroscopic variables do not change with time.
- Adiabatic wall: insulating, no heat flow. Diathermic wall: conducting, allows heat flow.
- Zeroth law: two systems in thermal equilibrium with a third system separately are in thermal equilibrium with each other.
- Formulated by R.H. Fowler in 1931, after the first and second laws were already numbered.
- The zeroth law gives the concept of temperature: the quantity equal for systems in thermal equilibrium.
Heat, internal energy and work
- Internal energy U = sum of molecular kinetic and potential energies in the centre-of-mass frame. It excludes the kinetic energy of the system as a whole.
- U is a state variable: it depends only on the state, not on the path.
- For a gas (intermolecular forces neglected), U = kinetic energy of random translational, rotational and vibrational motion.
- Heat: energy transfer due to temperature difference. Work: energy transfer by other means (e.g. moving a piston).
- Heat is energy in transit. "A gas has a certain amount of heat" is meaningless; "a gas has a certain internal energy" is correct.
- Heat and work are not state variables.
First law of thermodynamics
- ΔQ = ΔU + ΔW: heat supplied = increase in internal energy + work done by the system.
- It is the law of conservation of energy applied to a system with heat and work exchange.
- ΔU depends only on initial and final states; ΔQ and ΔW depend on the path, but ΔQ − ΔW is path independent.
- Work against constant pressure: ΔW = PΔV, so ΔQ = ΔU + PΔV.
- Sign convention: Q > 0 heat added; Q < 0 heat removed; W > 0 work by the system; W < 0 work on the system.
- Water → steam (1 g): ΔQ = 2256 J, ΔW = 169.2 J, so ΔU = 2086.8 J. Most heat goes into internal energy.
Specific heat capacity
- s = (1/m)(ΔQ/ΔT), unit J kg⁻¹ K⁻¹; molar C = (1/µ)(ΔQ/ΔT), unit J mol⁻¹ K⁻¹.
- C depends on the substance, its temperature and the conditions under which heat is supplied.
- Solids (equipartition): each atom has average energy 3kBT, so U = 3RT per mole and C = 3R. Agrees at ordinary temperatures; carbon is an exception; fails at low temperatures.
- Calorie: heat to raise 1 g of water from 14.5 °C to 15.5 °C. 1 cal = 4.186 J. Specific heat of water = 4186 J kg⁻¹ K⁻¹.
- "Mechanical equivalent of heat" is just a calorie-to-joule conversion factor, now superfluous.
- For an ideal gas: Cp − Cv = R. Derived from ΔQ = ΔU + PΔV, with U of an ideal gas depending only on T.
State variables and equation of state
- Equilibrium states are described by state variables (P, V, T, mass, composition).
- Free expansion and an explosive petrol-air reaction are not equilibrium states; they cannot be described by state variables.
- Equation of state links state variables; for an ideal gas PV = µRT.
- P-V curve at fixed temperature = isotherm.
- Extensive variables (halve when the system is halved): U, V, total mass M.
- Intensive variables (unchanged): P, T, density ρ.
Thermodynamic processes
- Quasi-static: infinitely slow; system stays in equilibrium with surroundings at every stage. A hypothetical construct.
- Isothermal (T constant): PV = constant (Boyle's law). ΔU = 0 for an ideal gas, so Q = W = µRT ln(V₂/V₁). Expansion absorbs heat; compression releases heat.
- Adiabatic (Q = 0): PV^γ = constant, γ = Cp/Cv. Work by the gas lowers U and T. W = µR(T₁ − T₂)/(γ − 1). Adiabatic expansion cools; adiabatic compression heats.
- Isochoric (V constant): W = 0; all heat changes U and T (governed by Cv).
- Isobaric (P constant): W = P(V₂ − V₁) = µR(T₂ − T₁); heat goes partly to U, partly to work (governed by Cp).
- Cyclic: system returns to the initial state, ΔU = 0, so total heat absorbed = work done.
- In an isothermal quasi-static process, heat still flows because of an infinitesimal temperature difference.
Second law of thermodynamics
- Rules out processes that the first law allows (a book never jumps up by cooling the table).
- Efficiency of a heat engine can never be 1; coefficient of performance of a refrigerator can never be infinite.
- Kelvin-Planck statement: no process is possible whose sole result is absorption of heat from a reservoir and its complete conversion into work.
- Clausius statement: no process is possible whose sole result is transfer of heat from a colder object to a hotter object.
- The two statements are equivalent.
Reversible and irreversible processes
- Reversible: can be turned back so that both system and surroundings return to their original states with no change elsewhere. It must be quasi-static and non-dissipative.
- Example: quasi-static isothermal expansion of an ideal gas with a frictionless piston.
- Spontaneous processes are irreversible: heat spreading in a vessel, free expansion, combustion, diffusion of cooking gas, stirring a liquid.
- Causes of irreversibility: (1) non-equilibrium states; (2) friction, viscosity and other dissipative effects.
Carnot engine
- A reversible engine working between a hot reservoir T₁ and a cold reservoir T₂ (proposed by Sadi Carnot, 1824).
- Carnot cycle: isothermal expansion at T₁ (absorbs Q₁) → adiabatic expansion (T₁ to T₂) → isothermal compression at T₂ (releases Q₂) → adiabatic compression (T₂ to T₁).
- Efficiency η = 1 − T₂/T₁, and Q₂/Q₁ = T₂/T₁.
- Carnot's theorem: no engine between the same two temperatures is more efficient than a Carnot engine, and its efficiency is independent of the working substance.
- Run in reverse, a Carnot engine becomes a reversible refrigerator.
- Q₂/Q₁ = T₂/T₁ defines a universal thermodynamic temperature scale.
Formula table
| Formula | Meaning of symbols | When to use |
|---|---|---|
ΔQ = ΔU + ΔW |
ΔQ = heat supplied, ΔW = work by system | First law, any process |
ΔW = P ΔV |
P = constant pressure | Work against constant pressure |
W = µRT ln(V2/V1) |
µ = moles, T = constant temperature | Isothermal work and heat (ideal gas) |
PV = constant |
– | Isothermal process |
PV^γ = constant |
γ = Cp/Cv | Adiabatic process (ideal gas) |
TV^(γ−1) = constant |
– | Temperature change in adiabatic steps |
W = µR(T1 − T2)/(γ − 1) |
T1, T2 = initial, final temperatures | Adiabatic work |
W = P(V2 − V1) = µR(T2 − T1) |
– | Isobaric work |
W = 0 |
– | Isochoric process |
ΔU = 0, Q = W |
– | Cyclic process; isothermal process of ideal gas |
s = ΔQ/(m ΔT), C = ΔQ/(µ ΔT) |
m = mass, µ = moles | Specific and molar heat capacity |
Cp − Cv = R |
R = 8.31 J mol⁻¹ K⁻¹ | Ideal gas molar heats |
C = 3R |
– | Molar heat of solids (ordinary temperatures) |
η = W/Q1 = 1 − Q2/Q1 |
Q1 = heat absorbed, Q2 = heat released | Engine efficiency |
η = 1 − T2/T1 |
T1 = source, T2 = sink (kelvin) | Carnot efficiency |
Q2/Q1 = T2/T1 |
– | Carnot cycle heat ratio |
Units and dimensions: heat in J, dimensions [ML²T⁻²]; specific heat J kg⁻¹ K⁻¹, [L²T⁻²K⁻¹]; 1 cal = 4.186 J. Always use kelvin in η = 1 − T₂/T₁.
Important tables and comparisons
| Process | Condition | Work done by ideal gas | Heat and internal energy |
|---|---|---|---|
| Isothermal | T constant | µRT ln(V₂/V₁) | ΔU = 0, Q = W |
| Adiabatic | Q = 0 | µR(T₁ − T₂)/(γ − 1) | W = −ΔU |
| Isochoric | V constant | 0 | Q = ΔU |
| Isobaric | P constant | µR(T₂ − T₁) | Q = ΔU + W |
| Cyclic | Returns to start | Net W = net Q absorbed | ΔU = 0, Q = W |
| Heat and work | Internal energy |
|---|---|
| Modes of energy transfer | Property of the state |
| Not state variables | State variable |
| Path dependent | Path independent |
| Extensive | Intensive |
|---|---|
| Internal energy U | Pressure P |
| Volume V | Temperature T |
| Total mass M | Density ρ |
| Statement of second law | What it forbids |
|---|---|
| Kelvin-Planck | A perfect heat engine (heat fully into work) |
| Clausius | A perfect refrigerator (heat from cold to hot with no work) |
Diagrams to revise
- Fig. 11.1 Adiabatic vs diathermic wall: no heat flow vs heat flows until thermal equilibrium.
- Fig. 11.2 Zeroth law: A and B each in equilibrium with C are then in equilibrium with each other.
- Fig. 11.4 Heat vs work: heat from a temperature difference; work by moving the piston.
- Fig. 11.6 Free expansion and explosive reaction: non-equilibrium states, no state variables.
- Fig. 11.8 Isothermal and adiabatic P-V curves: two adiabatic curves connect two isotherms; the adiabatic curve falls more steeply.
- Fig. 11.9 Carnot cycle: 1→2 isothermal expansion, 2→3 adiabatic expansion, 3→4 isothermal compression, 4→1 adiabatic compression.
- Fig. 11.10 Irreversible engine I coupled to Carnot refrigerator R: if I beat R, the pair would violate Kelvin-Planck.
NEET traps in this chapter
- ⚠️ The zeroth law was formulated last (Fowler, 1931), even though it is numbered zero.
- ⚠️ Internal energy does not include the kinetic energy of the system moving as a whole.
- ⚠️ Heat and work are not state variables; ΔU is path independent, ΔQ and ΔW are not.
- ⚠️ In ΔQ = ΔU + ΔW, ΔW is work done by the system. Work done on the gas enters as a negative ΔW.
- ⚠️ In an isothermal process of an ideal gas, ΔU = 0 but heat is not zero: Q = W.
- ⚠️ Adiabatic means Q = 0, not ΔT = 0; adiabatic expansion lowers the temperature.
- ⚠️ Carnot efficiency uses kelvin temperatures and does not depend on the working substance.
- ⚠️ Cp − Cv = R holds for an ideal gas; C = 3R for solids fails at low temperatures and for carbon.
Practice questions
Try each question, then check the answer key below. Get instant answers and explanations for more Thermodynamics questions on TrackPrep.
Q1. 500 J of heat is supplied to a gas and, at the same time, 200 J of work is done on the gas. The change in its internal energy is:
- (A) 200 J
- (B) 300 J
- (C) 500 J
- (D) 700 J
👉 Solve this and more Thermodynamics questions on TrackPrep
Q2. The concept of temperature follows directly from the:
- (A) first law of thermodynamics
- (B) zeroth law of thermodynamics
- (C) second law of thermodynamics
- (D) Carnot theorem
👉 Solve this and more Thermodynamics questions on TrackPrep
Q3. A Carnot engine works between a source at 527 °C and a sink at 127 °C. Its efficiency is:
- (A) 25%
- (B) 50%
- (C) 76%
- (D) 100%
👉 Solve this and more Thermodynamics questions on TrackPrep
Q4. 2 mol of an ideal gas are heated at constant pressure so that the temperature rises by 50 K. The work done by the gas is (R = 8.31 J mol⁻¹ K⁻¹):
- (A) 0 J
- (B) 415.5 J
- (C) 831 J
- (D) 1662 J
👉 Solve this and more Thermodynamics questions on TrackPrep
Q5. When an ideal gas expands adiabatically, its temperature:
- (A) increases
- (B) remains constant
- (C) decreases
- (D) may increase or decrease depending on the gas
👉 Solve this and more Thermodynamics questions on TrackPrep
Q6. How many of the following statements are correct?
- Heat and work are state variables.
- Internal energy is a state variable.
- For an ideal gas, Cp − Cv = R.
- In an isochoric process, the work done by the gas equals the heat absorbed.
- The efficiency of a Carnot engine depends on the nature of the working substance.
- (A) One
- (B) Two
- (C) Three
- (D) Four
👉 Solve this and more Thermodynamics questions on TrackPrep
Q7. Match List I (process of an ideal gas) with List II (relation that holds):
| List I | List II |
|---|---|
| A. Isothermal | i. W = 0 |
| B. Adiabatic | ii. W = µR(T₂ − T₁) |
| C. Isochoric | iii. PV = constant |
| D. Isobaric | iv. PV^γ = constant |
- (A) A-iv, B-iii, C-i, D-ii
- (B) A-iii, B-iv, C-ii, D-i
- (C) A-iii, B-i, C-iv, D-ii
- (D) A-iii, B-iv, C-i, D-ii
👉 Solve this and more Thermodynamics questions on TrackPrep
Q8. Assertion (A): No engine working between reservoirs at 500 K and 300 K can have an efficiency greater than 40%. Reason (R): The efficiency of a Carnot engine depends on the working substance used in it.
- (A) Both A and R are true, and R is the correct explanation of A
- (B) Both A and R are true, but R is not the correct explanation of A
- (C) A is true, but R is false
- (D) A is false, but R is true
👉 Solve this and more Thermodynamics questions on TrackPrep
Answer key
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 |
|---|---|---|---|---|---|---|---|
| D | B | B | C | C | B | D | C |
Got one wrong? Ask Jojo, the AI teacher, to explain it on a whiteboard: ask your doubt on TrackPrep
Practise Thermodynamics on TrackPrep
- ✅ Page-wise NCERT MCQs for Thermodynamics, with explanations
- ✅ Chapter-wise PYQs
- ✅ NCERT line-by-line lecture by Anmol Sir
- ✅ Jojo, the AI teacher, for any doubt, in Hindi, English or Hinglish
👉 Start practising Thermodynamics on TrackPrep
Previous chapter: Thermal Properties of Matter · Next chapter: Kinetic Theory · All chapters: NEET Physics chapter-wise notes and questions
Frequently asked questions
Is Thermodynamics important for NEET 2027?
Yes. NEET Physics has 45 questions (180 marks), and this chapter gives short numericals on the first law, work in different processes and Carnot efficiency, plus concept questions on state variables and the second law.
Which topics of Thermodynamics should I revise first?
Start with the first law and its sign convention, then the four processes (isothermal, adiabatic, isochoric, isobaric) with their work formulas, then Cp − Cv = R, and finish with the second law and the Carnot engine.
How do I revise Thermodynamics quickly before NEET?
Learn the process comparison table, practise one first-law sign problem and one Carnot efficiency problem in kelvin, and redraw the Carnot cycle. Then read the traps list once.
Where can I practise more Thermodynamics questions?
TrackPrep has page-wise NCERT MCQs, chapter-wise PYQs and custom tests for this chapter, and Jojo, the AI teacher, explains any doubt on a whiteboard.
How many laws of thermodynamics are there in NCERT Class 11 Physics?
NCERT Class 11 Physics discusses three laws of thermodynamics: the zeroth law, the first law and the second law. The zeroth law gives the concept of temperature, the first law (ΔQ = ΔU + ΔW) is the law of conservation of energy, and the second law (Kelvin-Planck and Clausius statements) says which processes can actually happen. The zeroth law was formulated by R.H. Fowler in 1931, after the first and second laws were already numbered.
What is thermodynamic equilibrium?
A system is in thermodynamic equilibrium when the macroscopic variables that describe it, such as pressure, volume, temperature, mass and composition, do not change with time. An example is a gas in a closed rigid container that is fully insulated from its surroundings. Whether a system reaches equilibrium depends on its surroundings and on the wall separating them: an adiabatic wall stops heat flow, while a diathermic wall allows it.
What is a thermodynamic process?
A thermodynamic process is a change in the state of a system, described by how its state variables (P, V, T) change. NCERT discusses the isothermal (T constant), adiabatic (no heat exchange, Q = 0), isochoric (V constant) and isobaric (P constant) processes, and the cyclic process, in which the system returns to its initial state so ΔU = 0. A quasi-static process is infinitely slow, so the system stays in equilibrium with its surroundings at every stage.
What is work in thermodynamics?
In thermodynamics, work is energy transfer to or from a system by means that do not involve a temperature difference, for example moving a piston. Against a constant pressure, the work done by a gas is ΔW = PΔV. By sign convention, W is positive when work is done by the system and negative when work is done on it, and like heat, work is not a state variable because it depends on the path.
Last updated: 21 November 2026.
- chapter notes
- physics
- class 11
- neet 2027
- notes
- thermodynamics
