Semiconductor Electronics NEET Notes and Important Questions (Class 12 Physics)
Quick NEET revision of NCERT Class 12 Physics Chapter 14, Semiconductor Electronics: energy bands, intrinsic and extrinsic semiconductors, p-n junction formation, diode bias and V-I curve, rectifiers and filters, with a formula table, traps and 8 NEET-style MCQs.
By Anmol Sharma19 min read

Semiconductor Electronics: key highlights
| Particulars | Details |
|---|---|
| Class and chapter | NCERT Class 12 Physics, Chapter 14 (Semiconductor Electronics: Materials, Devices and Simple Circuits) |
| Unit | Electronic Devices |
| Key topics | Metals, insulators and semiconductors (energy bands), intrinsic semiconductors and holes, n-type and p-type doping, ne nh = ni², p-n junction formation (diffusion, drift, depletion region), forward and reverse bias, diode V-I characteristics, half-wave and full-wave rectifiers, capacitor filter |
| How NEET asks it | numericals on ne nh = ni² and dynamic resistance; statement-based on bias and depletion layer; match-the-column on band gaps and dopants; assertion-reason on reverse current |
| Revision time | 45-60 minutes for these notes |
In one line: A small band gap lets a few electrons and holes conduct, doping makes one of them the majority, and a p-n junction's barrier lets current flow easily in one direction only, which is what a rectifier uses.
📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.
Table of contents
- Download the NCERT PDF
- Short notes for quick revision
- Important tables and comparisons
- Diagrams to revise
- NEET traps in this chapter
- Practice questions
- Answer key
- Practise Semiconductor Electronics on TrackPrep
- Frequently asked questions
Download the NCERT PDF
| Book | Chapter | Official PDF |
|---|---|---|
| NCERT Class 12 Physics | Chapter 14: Semiconductor Electronics: Materials, Devices and Simple Circuits | 📥 Download Semiconductor Electronics: Materials, Devices and Simple Circuits NCERT PDF (ncert.nic.in) |
Read the official NCERT chapter alongside these notes. Every note and question on this page is based on it.
Short notes for quick revision
Why semiconductors replaced vacuum tubes
- Vacuum tubes (valves): diode (anode/plate + cathode), triode (cathode, plate, grid), tetrode, pentode. Electrons come from a heated cathode and flow only cathode → anode in vacuum.
- Valves are bulky, use high power, work at high voltages (~100 V), have limited life and low reliability.
- Semiconductor devices: carriers are within the solid, no heating or vacuum; small, low power, low voltage, long life, high reliability.
- A crystal of galena (PbS) with a metal point contact was used early as a detector of radio waves.
- The transistor was discovered in 1948.
Classification by conductivity
- Metals: ρ ~ 10^-2 to 10^-8 Ω m; σ ~ 10^2 to 10^8 S/m.
- Semiconductors: ρ ~ 10^-5 to 10^6 Ω m; σ ~ 10^5 to 10^-6 S/m.
- Insulators: ρ ~ 10^11 to 10^19 Ω m; σ ~ 10^-11 to 10^-19 S/m.
- Elemental semiconductors: Si, Ge. Compound: inorganic (CdS, GaAs, CdSe, InP), organic (anthracene, doped phthalocyanines), organic polymers (polypyrrole, polyaniline, polythiophene).
Energy bands
- In a solid, each electron has a slightly different energy level; together they form continuous energy bands.
- Valence band: contains energy levels of valence electrons. Conduction band: the band above it.
- For a crystal of N Si or Ge atoms: 4N valence electrons and 8N states; at the crystal spacing these split into a valence band (4N states, full at 0 K) and a conduction band (4N states, empty at 0 K).
- EC = bottom of conduction band; EV = top of valence band; Eg = EC − EV = energy band gap.
- Metals: bands overlap or conduction band partly filled; Eg ≈ 0.
- Insulators: Eg > 3 eV; no thermal excitation across the gap.
- Semiconductors: Eg < 3 eV (finite but small); some electrons cross at room temperature.
- Band gaps: C (diamond) 5.4 eV, Si 1.1 eV, Ge 0.7 eV, Sn 0 eV (Sn is a group IV metal).
- Example 14.1: C, Si and Ge have the same lattice, but their bonding electrons are in the 2nd, 3rd and 4th orbits; ionisation energy is least for Ge, so C is an insulator and Si, Ge are semiconductors.
Intrinsic semiconductor
- Si and Ge have a diamond-like structure; each atom has four nearest neighbours and forms covalent bonds by sharing electrons. Lattice spacing: C 3.56 Å, Si 5.43 Å, Ge 5.66 Å.
- At higher temperature some bonds break: a free electron (−q) and a hole (+q), a vacancy with effective positive charge.
- ne = nh = ni (intrinsic carrier concentration).
- Hole motion is really the motion of bound electrons filling vacancies; holes move towards negative potential.
- I = Ie + Ih.
- Recombination goes on alongside generation; at equilibrium, rate of generation = rate of recombination.
- At T = 0 K, an intrinsic semiconductor behaves like an insulator.
Extrinsic semiconductors (doping)
- Pure semiconductors conduct poorly at room temperature, so a few ppm of impurity is added: doping; the impurity atoms are dopants.
- Dopant must not distort the lattice: its size must be nearly the same as Si or Ge.
- n-type: pentavalent donors (As, Sb, P). The fifth electron is weakly bound: ionisation energy ~0.01 eV (Ge), 0.05 eV (Si), compared with band gaps ~0.72 eV (Ge), ~1.1 eV (Si). ne >> nh; electrons are majority carriers.
- Number of donor electrons depends on doping level, independent of temperature; intrinsic pairs increase weakly with temperature.
- p-type: trivalent acceptors (In, B, Al). Three bonds form; the fourth has a hole. nh >> ne; holes are majority carriers. One acceptor gives one hole.
- The acceptor ion becomes negatively charged; the donor ion becomes positively charged. The crystal stays electrically neutral overall.
- Abundant majority carriers destroy minority carriers by recombination, so doping reduces the minority-carrier concentration.
- Donor level ED lies just below EC; acceptor level EA lies just above EV.
- ne nh = ni² in thermal equilibrium.
- Example 14.2: Si with 5 × 10^28 atoms/m³ doped with 1 ppm As → ne ≈ ND = 5 × 10^22 m^-3; with ni = 1.5 × 10^16 m^-3, nh ≈ 4.5 × 10^9 m^-3.
p-n junction formation
- Made by adding a pentavalent impurity to part of a p-Si wafer. Two slabs cannot simply be pressed together: surface roughness is far larger than the 2-3 Å atomic spacing (Example 14.3).
- Diffusion: concentration gradient drives holes p → n and electrons n → p: diffusion current.
- Electrons leaving the n-side leave immobile positive donor ions; holes leaving the p-side leave immobile negative acceptor ions. Together these space-charge layers form the depletion region, thickness about one-tenth of a micrometre.
- Field points from n-side (+) to p-side (−); it drives minority carriers across: drift current, opposite to diffusion current.
- Equilibrium when diffusion current = drift current: no net current.
- The n-side becomes positive relative to the p-side: barrier potential V0 opposes further electron flow from n to p.
Diode under bias
- Semiconductor diode: a p-n junction with metal contacts; arrow in the symbol shows conventional current in forward bias.
- Applied voltage drops mostly across the depletion region (highest resistance).
- Forward bias: p to +, n to −. Barrier falls to (V0 − V), depletion layer narrows. Electrons go n → p and holes p → n: minority carrier injection. Current in mA.
- Reverse bias: n to +, p to −. Barrier rises to (V0 + V), depletion layer widens. Only drift of minority carriers: current of a few µA, nearly independent of voltage, limited by minority-carrier concentration.
- At the breakdown voltage Vbr, reverse current rises sharply; beyond the rated value the diode is destroyed by overheating (also true for too much forward current).
V-I characteristics
- Forward bias: milliammeter; reverse bias: microammeter; voltage varied with a potentiometer or rheostat.
- Forward current stays tiny until the threshold (cut-in) voltage: ~0.2 V for Ge, ~0.7 V for Si, then rises exponentially.
- Reverse current is small and nearly constant: reverse saturation current.
- Dynamic resistance rd = ΔV/ΔI. Forward resistance is low; reverse resistance is high.
- Example 14.4: between 10 mA (0.7 V) and 20 mA (0.8 V), rfb = 10 Ω; at −10 V, I = −1 µA, rrb = 1.0 × 10^7 Ω.
Rectifiers and filters
- Rectifier: uses one-way conduction to turn ac into unidirectional (pulsating) voltage.
- Half-wave rectifier: one diode in series with RL; output only in the half cycles when the diode is forward biased. Reverse breakdown voltage must be higher than the peak ac voltage.
- Full-wave rectifier: two diodes and a centre-tap transformer. D1 conducts in one half cycle, D2 in the other; each diode rectifies only half the secondary voltage. Output between the diodes' common n-side point and the centre tap. More efficient than half-wave. (A four-diode circuit needs no centre tap.)
- Output is unidirectional but pulsating (half-sinusoid pulses).
- Filter: a capacitor in parallel with RL (or an inductor in series) removes the ac ripple.
- Capacitor charges to the peak and discharges through RL; rate of fall depends inversely on the time constant C RL. Large C is used; output is close to the peak voltage. Capacitor input filters are the most widely used in power supplies.
Formula table
| Formula | Meaning of symbols | When to use |
|---|---|---|
ρ = 1/σ |
ρ resistivity (Ω m), σ conductivity (S/m) | Classifying solids |
Eg = EC − EV |
Band gap (eV) | Metal (≈ 0), semiconductor (< 3 eV), insulator (> 3 eV) |
ne = nh = ni |
ni intrinsic carrier concentration | Pure semiconductor |
I = Ie + Ih |
Electron and hole currents | Total current in a semiconductor |
ne nh = ni² |
Holds in thermal equilibrium | Minority carrier concentration in doped material |
ne ≈ ND (n-type), nh ≈ NA (p-type) |
ND donor, NA acceptor concentration | Heavily doped compared with ni |
V0 − V / V0 + V |
V0 barrier potential, V applied | Barrier height in forward / reverse bias |
rd = ΔV/ΔI |
Dynamic resistance (Ω) | From the V-I curve |
τ = C RL |
Time constant | Capacitor filter: larger τ, smaller ripple |
Important tables and comparisons
Metals, semiconductors and insulators
| Feature | Metal | Semiconductor | Insulator |
|---|---|---|---|
| Resistivity (Ω m) | 10^-2 to 10^-8 | 10^-5 to 10^6 | 10^11 to 10^19 |
| Band gap | Overlap or partly filled band (≈ 0) | Small, < 3 eV | Large, > 3 eV |
| Example | Sn (Eg = 0) | Si 1.1 eV, Ge 0.7 eV | Diamond 5.4 eV |
n-type vs p-type
| Feature | n-type | p-type |
|---|---|---|
| Dopant | Pentavalent (As, Sb, P): donor | Trivalent (B, Al, In): acceptor |
| Majority carriers | Electrons | Holes |
| Minority carriers | Holes | Electrons |
| Impurity level | ED just below EC | EA just above EV |
| Charge on dopant ion | Positive | Negative |
| Net charge of crystal | Neutral | Neutral |
Forward vs reverse bias
| Feature | Forward bias | Reverse bias |
|---|---|---|
| Connection | p to +, n to − | n to +, p to − |
| Barrier height | V0 − V (reduced) | V0 + V (increased) |
| Depletion width | Decreases | Increases |
| Main current | Diffusion of injected carriers (mA) | Drift of minority carriers (µA) |
| Meter used | Milliammeter | Microammeter |
| Resistance | Low | Very high |
Half-wave vs full-wave rectifier
| Feature | Half-wave | Full-wave (centre tap) |
|---|---|---|
| Diodes | One | Two |
| Output | Positive half cycles only | Both half cycles |
| Transformer | Ordinary | Centre-tap |
| Efficiency | Lower | Higher |
Diagrams to revise
- Fig. 14.1 and 14.2 (energy bands): EC, EV, Eg; overlap in metals, Eg > 3 eV in insulators, Eg < 3 eV in semiconductors.
- Fig. 14.4 and 14.5 (covalent bonds): +4 cores, broken bond gives a free electron and a hole; hole moves from site 1 to site 2.
- Fig. 14.7 and 14.8 (doping): donor core with one extra positive charge and a free electron; acceptor core with one extra negative charge and a hole.
- Fig. 14.9 (impurity levels): ED just below EC in n-type; EA just above EV in p-type.
- Fig. 14.10 and 14.11 (junction): diffusion vs drift, depletion region, barrier potential with n-side positive.
- Fig. 14.13 and 14.15 (bias): barrier lowered in forward bias, raised in reverse bias.
- Fig. 14.16 (V-I curve of Si diode): cut-in near 0.7 V, reverse saturation current in µA, breakdown at Vbr.
- Fig. 14.18-14.20 (rectifiers): half-wave output, full-wave output with centre tap, capacitor-filtered output near peak voltage.
NEET traps in this chapter
- ⚠️ A p-type semiconductor is not positively charged; both n-type and p-type crystals are electrically neutral.
- ⚠️ Pentavalent = donor = n-type; trivalent = acceptor = p-type. Boron, aluminium and indium give p-type.
- ⚠️ Donor electrons do not increase with temperature (they depend on doping level); intrinsic pairs increase weakly with temperature.
- ⚠️ ne nh = ni²: doping raises one carrier and lowers the other.
- ⚠️ In an unbiased junction the n-side is at higher potential than the p-side, and the field points from n to p.
- ⚠️ Forward bias narrows the depletion layer; reverse bias widens it.
- ⚠️ Reverse current is limited by minority-carrier concentration, not by the applied voltage (until breakdown).
- ⚠️ Cut-in voltage is about 0.7 V for Si and 0.2 V for Ge; do not mix these with the band gaps (1.1 eV and 0.7 eV).
- ⚠️ In a full-wave centre-tap rectifier, each diode sees only half the secondary voltage.
Practice questions
Try each question, then check the answer key below. Get instant answers and explanations for more Semiconductor Electronics questions on TrackPrep.
Q1. A pure silicon crystal has 5 × 10^28 atoms m^-3. It is doped with 2 ppm of arsenic. If ni = 1.5 × 10^16 m^-3, the hole concentration is about
- (A) 4.5 × 10^9 m^-3
- (B) 1.5 × 10^16 m^-3
- (C) 2.25 × 10^9 m^-3
- (D) 1 × 10^23 m^-3
👉 Solve this and more Semiconductor Electronics questions on TrackPrep
Q2. For a silicon diode in forward bias, the current rises from 5 mA to 25 mA when the voltage rises from 0.65 V to 0.75 V. The dynamic resistance in this range is
- (A) 5 Ω
- (B) 10 Ω
- (C) 0.5 Ω
- (D) 50 Ω
👉 Solve this and more Semiconductor Electronics questions on TrackPrep
Q3. A 50 Hz ac supply is fed to a full-wave rectifier. The number of output voltage pulses across the load per second is
- (A) 25
- (B) 50
- (C) 100
- (D) 200
👉 Solve this and more Semiconductor Electronics questions on TrackPrep
Q4. When a p-n junction diode is forward biased, its depletion region
- (A) becomes wider and the barrier height increases
- (B) becomes narrower and the barrier height decreases
- (C) does not change
- (D) becomes narrower but the barrier height increases
👉 Solve this and more Semiconductor Electronics questions on TrackPrep
Q5. Germanium doped with indium gives
- (A) an n-type semiconductor with electrons as majority carriers
- (B) an intrinsic semiconductor
- (C) a positively charged p-type crystal
- (D) a p-type semiconductor with holes as majority carriers
👉 Solve this and more Semiconductor Electronics questions on TrackPrep
Q6. How many of the following statements are correct?
- In an intrinsic semiconductor, the number of free electrons equals the number of holes.
- In an unbiased p-n junction, the p-side is at a higher potential than the n-side.
- The donor energy level in n-type silicon lies slightly below the bottom of the conduction band.
- The thickness of the depletion region is of the order of one-tenth of a micrometre.
- At absolute zero, an intrinsic semiconductor behaves like a metal.
- (A) One
- (B) Two
- (C) Three
- (D) Four
👉 Solve this and more Semiconductor Electronics questions on TrackPrep
Q7. Match List I (material) with List II (energy band gap, as given in NCERT).
| List I | List II |
|---|---|
| A. Diamond (C) | i. 0 eV |
| B. Silicon | ii. 0.7 eV |
| C. Germanium | iii. 5.4 eV |
| D. Tin (Sn) | iv. 1.1 eV |
- (A) A-iii, B-iv, C-ii, D-i
- (B) A-iv, B-iii, C-ii, D-i
- (C) A-iii, B-ii, C-iv, D-i
- (D) A-iii, B-iv, C-i, D-ii
👉 Solve this and more Semiconductor Electronics questions on TrackPrep
Q8. Assertion (A): The reverse current of a p-n junction diode is nearly independent of the reverse bias voltage below breakdown. Reason (R): The reverse current is limited by the concentration of minority carriers on either side of the junction.
- (A) Both A and R are true and R is the correct explanation of A.
- (B) Both A and R are true but R is not the correct explanation of A.
- (C) A is true but R is false.
- (D) A is false but R is true.
👉 Solve this and more Semiconductor Electronics questions on TrackPrep
Answer key
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 |
|---|---|---|---|---|---|---|---|
| C | A | C | B | D | C | A | A |
- Q1: ND = 2 × 10^-6 × 5 × 10^28 = 1 × 10^23 m^-3 ≈ ne; nh = ni²/ne = 2.25 × 10^32/1 × 10^23 = 2.25 × 10^9 m^-3.
- Q2: rd = ΔV/ΔI = 0.10 V/20 mA = 5 Ω.
- Q3: A full-wave rectifier gives one pulse in every half cycle: 2 × 50 = 100 pulses per second.
- Q4: Forward bias opposes V0, so the barrier becomes V0 − V and the depletion layer narrows.
- Q5: Indium is trivalent (acceptor), so holes are the majority carriers; the crystal stays neutral.
- Q6: Statements 1, 3 and 4 are correct. The n-side is at the higher potential, and at 0 K an intrinsic semiconductor behaves like an insulator.
- Q7: NCERT values: C 5.4 eV, Si 1.1 eV, Ge 0.7 eV, Sn 0 eV.
- Q8: Even a small voltage sweeps all available minority carriers across, so the current depends on their concentration, not on the voltage.
Got one wrong? Ask Jojo, the AI teacher, to explain it on a whiteboard: ask your doubt on TrackPrep
Practise Semiconductor Electronics on TrackPrep
- ✅ Page-wise NCERT MCQs for Semiconductor Electronics, with explanations
- ✅ Chapter-wise PYQs
- ✅ NCERT line-by-line lecture by Anmol Sir
- ✅ Jojo, the AI teacher, for any doubt, in Hindi, English or Hinglish
👉 Start practising Semiconductor Electronics on TrackPrep
Previous chapter: Nuclei · All chapters: NEET Physics chapter-wise notes and questions
Frequently asked questions
Is Semiconductor Electronics important for NEET 2027?
Yes. NEET Physics has 45 questions (180 marks), and this chapter gives quick conceptual and numerical questions on energy bands, doping, ne nh = ni², the p-n junction, diode bias and rectifiers.
Which topics of Semiconductor Electronics should I revise first?
Start with energy bands and the n-type vs p-type table, then p-n junction formation (diffusion, drift, depletion region, barrier). After that, revise forward and reverse bias, the V-I curve and dynamic resistance, and finish with half-wave and full-wave rectifiers.
How do I revise Semiconductor Electronics quickly before NEET?
Use the comparison tables above, then redo NCERT Examples 14.2 and 14.4. Read the traps list once, especially charge neutrality of doped crystals and which side of the junction is at higher potential.
Where can I practise more Semiconductor Electronics questions?
TrackPrep has page-wise NCERT MCQs and chapter-wise PYQs for this chapter, plus NTA-style CBT mock tests. If a diode or doping question confuses you, send a photo of it to Jojo, the AI teacher, for a step-by-step whiteboard solution.
What is a semiconductor in Class 12 Physics?
A semiconductor is a material whose resistivity (about 10⁻⁵ to 10⁶ Ω m) lies between that of metals and insulators. In terms of energy bands, it has a small but finite band gap, Eg < 3 eV, so at room temperature some electrons are thermally excited from the valence band to the conduction band, leaving holes behind. Silicon (Eg = 1.1 eV) and germanium (Eg = 0.7 eV) are the standard examples, while diamond (5.4 eV) is an insulator.
What materials are semiconductors?
The elemental semiconductors are silicon (Si) and germanium (Ge). Compound semiconductors include inorganic ones such as CdS, GaAs, CdSe and InP, organic ones such as anthracene and doped phthalocyanines, and organic polymers such as polypyrrole, polyaniline and polythiophene. Most present-day semiconductor devices are based on Si, Ge and the inorganic compound semiconductors.
What are semiconductor devices and why did they replace vacuum tubes?
Semiconductor devices are electronic devices, such as the p-n junction diode and the transistor, in which current is carried by charge carriers moving within a solid semiconductor. They replaced vacuum tubes (valves), which needed a heated cathode and a vacuum, were bulky, used high power and high voltages (about 100 V), and had limited life and low reliability. Semiconductor devices need no heating or vacuum, so they are small, use low power and low voltage, and have long life and high reliability; NCERT Class 12 studies the p-n junction diode and its use in half-wave and full-wave rectifiers.
Last updated: 21 November 2026.
- physics
- class 12
- neet 2027
- notes
- semiconductor electronics
