Skip to content
TrackPrep

AC vs DC: Difference Between Alternating Current and Direct Current for NEET 2027

Direct current keeps one direction; alternating current reverses every half cycle. This NCERT Class 12 guide compares AC and DC in tables, explains rms values, how capacitors and inductors treat each, why power is sent as AC, and ends with 5 NEET-style MCQs.

By Anmol Sharma8 min read

Cartoon student at a laptop: AC vs DC for NEET 2027

AC vs DC: key highlights

Particulars Direct current (DC) Alternating current (AC)
NCERT source Class 12 Physics, Ch 3 (Current Electricity) Class 12 Physics, Ch 7 (Alternating Current) and Ch 6 (AC generator)
Direction Does not change with time Reverses every half cycle (sinusoidal)
Equation Constant value, e.g. V v = vm sin ωt
Average over one cycle Equal to its value Zero
Changing voltage Not with a transformer Easily, with a transformer
Capacitor Current stops once it is charged Current keeps flowing; limited by XC = 1/ωC

In one line: Direct current flows in one direction with a steady value, while alternating current changes direction sinusoidally with time; AC is preferred for supply because transformers can step its voltage up or down easily and it can be sent economically over long distances.

📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.

Table of contents

What NCERT says

  • DC: currents that do not change direction with time, as from the dc sources used in earlier chapters.
  • AC: the mains supply in homes and offices is a voltage that varies like a sine function with time. The current it drives is the alternating current.
  • Why AC is used: most electrical energy is transmitted and distributed as AC because AC voltages can be easily and efficiently changed by transformers, and energy can be sent economically over long distances.
  • Where AC comes from: an AC generator, which works on electromagnetic induction (a coil rotating in a magnetic field). In India the frequency of the supply is 50 Hz.

Difference between AC and DC: full table

Basis DC AC
Direction of flow One direction only Changes direction with the source frequency
Magnitude Constant (steady dc) Varies sinusoidally between +im and –im
Frequency Zero 50 Hz for Indian mains
Average value over a full cycle Non-zero Zero (positive and negative halves cancel)
Effective value The value itself rms value, I = im/√2 ≈ 0.707 im
Transformer Does not work (no changing flux) Works by mutual induction
Long-distance transmission Costlier, higher losses Voltage is stepped up so current and I²R loss fall, then stepped down near users
Power formula P = VI = I²R P = V I cos φ (rms values, power factor cos φ)
Defining one ampere From the force between two parallel current-carrying wires From Joule heating: 1 A rms gives the same average heating as 1 A dc
Phase between V and I Not applicable In phase for R; I lags by π/2 for L; I leads by π/2 for C

RMS value: how AC is compared with DC

The average AC current over a cycle is zero, but the average power is not zero, because power depends on i², which is always positive. So NCERT defines the root mean square (rms) or effective value.

Quantity Formula Meaning
rms current I = im/√2 = 0.707 im The dc current that gives the same average power loss
rms voltage V = vm/√2 = 0.707 vm Effective voltage
Average power in a resistor P = I²R = V²/R Same form as dc, using rms values
Household supply 220 V is an rms value Peak vm = √2 × 220 V ≈ 311 V

AC meters and ratings use rms values. The power rating of an AC device is its average power.

How R, L and C behave with AC and DC

Element With DC With AC
Resistor Opposes by R Opposes by R; V and I in phase
Inductor ω = 0, so XL = ωL = 0; only the coil's own resistance matters Reactance XL = ωL, rises with frequency; current lags by π/2
Capacitor Current flows only while it charges, then falls to zero Alternately charges and discharges; XC = 1/ωC, falls with frequency; current leads by π/2
Pure L or pure C — Power factor cos φ = 0, no power used: wattless current
Series LCR at resonance — XL = XC, cos φ = 1, current and power are maximum

NCERT example (lamp + capacitor in series): with DC the capacitor charges, then no current flows and the lamp does not glow. With AC the lamp glows; if C is reduced, XC rises and the lamp glows less brightly.

NEET traps to remember

  • Average of AC over a full cycle is zero, but average power is not. That is why rms values exist.
  • 220 V at home is rms, not peak. The peak is about 311 V.
  • A capacitor "blocks" steady DC only after charging. A brief charging current does flow.
  • Doubling frequency halves XC and doubles XL.
  • Transformers need AC. A steady DC gives no changing flux, so no induced emf in the secondary.
  • Resonance needs both L and C. It cannot occur in an RL or RC circuit.
  • A low power factor means more transmission loss, because more current is needed for the same power.

Practice MCQs

1. The household supply of 220 V is an rms value. Its peak value is about: (a) 156 V (b) 220 V (c) 311 V (d) 440 V

👉 Solve this and more Alternating Current questions on TrackPrep

2. A lamp is connected in series with a capacitor to a dc source. After a short time: (a) The lamp glows steadily (b) The lamp does not glow, as no current flows once the capacitor is charged (c) The lamp glows brighter if C is reduced (d) The lamp flickers at 50 Hz

👉 Solve this and more Alternating Current questions on TrackPrep

3. The average value of a sinusoidal alternating current over one complete cycle is: (a) im (b) im/√2 (c) 2im/π (d) Zero

👉 Solve this and more Alternating Current questions on TrackPrep

4. According to NCERT, the main reason for preferring ac voltage over dc voltage is that: (a) AC is safer to touch (b) AC voltages can be easily and efficiently changed by transformers (c) AC has no heating effect (d) AC cannot be stored

👉 Solve this and more Alternating Current questions on TrackPrep

5. In a purely inductive ac circuit, the power factor is: (a) 0 (b) 0.5 (c) 0.707 (d) 1

👉 Solve this and more Alternating Current questions on TrackPrep

Answer key

Q Answer Why
1 (c) vm = √2 × 220 V ≈ 311 V
2 (b) NCERT Example: after charging, no current flows in a dc circuit
3 (d) Positive and negative halves cancel over a full cycle
4 (b) NCERT: transformers convert ac voltages easily and efficiently
5 (a) Phase difference is π/2, so cos φ = 0 (wattless current)

Practise on TrackPrep

  • ✅ Page-wise NCERT MCQs for Alternating Current, including every NCERT example
  • ✅ Chapter-wise and year-wise PYQs on rms values, reactance, resonance and power factor
  • ✅ NTA-style CBT mocks to practise these numericals under time pressure
  • ✅ Jojo, the AI teacher, works through any LCR numerical on a whiteboard in Hindi, English or Hinglish

👉 Start practising free on TrackPrep

📲 Download the TrackPrep app for more practice: Get TrackPrep on Google Play

Related: Alternating Current: NEET notes and questions · NEET Physics chapter-wise notes and questions

Practise for NEET on the TrackPrep app: get it on Google Play

Frequently asked questions

What is the main difference between AC and DC?

DC flows in one direction with a steady value. AC changes direction with time, varying like a sine function, and in India it does so at 50 Hz.

Why is AC used in homes instead of DC?

Transformers can easily step AC voltage up for transmission and down for homes. Stepping up reduces the current, which cuts the I²R loss in long wires.

Does a capacitor allow AC or DC?

In a steady DC circuit, current flows only while the capacitor charges and then stops. With AC, the capacitor keeps charging and discharging, so current keeps flowing, limited by its reactance 1/ωC.

What is the rms value of AC?

It is the steady DC value that produces the same average heating in a resistor. For a sine wave it is 0.707 times the peak value.

Last updated: 21 November 2026.

Tags:
  • chapter notes
  • difference between
  • neet 2027
  • physics

← All articles