Alternating Current NEET Notes and Important Questions (Class 12 Physics)
Quick NEET revision of NCERT Class 12 Physics Chapter 7, Alternating Current. Crisp notes on rms values, phasors, ac through R, L and C, series LCR impedance, resonance, power factor, wattless current and transformers, a formula table, traps and 8 NEET-style MCQs.
By Anmol Sharma18 min read

Alternating Current: key highlights
| Particulars | Details |
|---|---|
| Class and chapter | NCERT Class 12 Physics, Chapter 7 |
| Unit | Electromagnetic Induction and Alternating Currents |
| Key topics | rms values, phasors, ac through R, L and C, series LCR circuit and impedance, resonance, power factor and wattless current, transformers |
| How NEET asks it | numericals on reactance, impedance, resonance and power; phase-relation questions; statement-based; match-the-column on formulas; assertion-reason on transformers |
| Revision time | 55-70 minutes for these notes |
In one line: In ac circuits, R, XL = ωL and XC = 1/ωC combine like the sides of a right triangle (Z), and only the resistor actually uses power, P = VI cos φ.
📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.
Table of contents
- Download the NCERT PDF
- Short notes for quick revision
- Important tables and comparisons
- Diagrams to revise
- NEET traps in this chapter
- Practice questions
- Answer key
- Practise Alternating Current on TrackPrep
- Frequently asked questions
Download the NCERT PDF
| Book | Chapter | Official PDF |
|---|---|---|
| NCERT Class 12 Physics | Chapter 7: Alternating Current | 📥 Download Alternating Current NCERT PDF (ncert.nic.in) |
Read the official NCERT chapter alongside these notes. Every note and question on this page is based on it.
Short notes for quick revision
Why ac
- Mains supply varies like a sine function of time: ac voltage; the current it drives is ac current.
- AC is preferred because it can be easily and efficiently converted from one voltage to another by transformers, and transmitted economically over long distances.
- Radio tuning uses a special property of ac circuits (resonance).
AC voltage applied to a resistor
- v = vm sin ωt gives i = im sin ωt, with im = vm/R (Ohm's law works for ac too).
- v and i are in phase: they reach zero, maximum and minimum together.
- Average current over a cycle is zero, but average power is not zero, because Joule heating depends on i².
- Instantaneous power p = im² R sin² ωt; ⟨sin² ωt⟩ = ½, so average power = ½ im² R.
- rms (effective) current: I = im/√2 = 0.707 im; rms voltage V = vm/√2 = 0.707 vm.
- In rms values: P = I²R = V²/R = IV, and V = IR, the same form as dc.
- Household 220 V is an rms value; peak = 1.414 × 220 = 311 V. (Points to Ponder: 240 V rms → peak about 340 V.)
- rms current = the dc current that gives the same average power loss (the ac ampere is defined by the heating effect).
- Example 7.1: 100 W, 220 V bulb → R = 484 Ω, peak voltage 311 V, rms current 0.454 A.
Phasors
- A phasor is a vector rotating about the origin with angular speed ω.
- Its vertical projection gives the instantaneous value; its length gives the peak value.
- Voltage and current are scalars; phasors are only a convenient way to add harmonically varying quantities.
- For a resistor, V and I phasors point in the same direction (phase angle zero).
AC voltage applied to an inductor
- L di/dt = vm sin ωt → i = im sin(ωt − π/2), with im = vm/ωL.
- Inductive reactance XL = ωL (unit ohm); ∝ L and ∝ frequency.
- Current lags the voltage by π/2 (one-quarter cycle; reaches maximum T/4 later).
- Average power over a complete cycle = zero (average of sin 2ωt is zero).
- Example 7.2: 25.0 mH, 220 V, 50 Hz → XL = 7.85 Ω, I = 28 A.
- Example 7.5: inserting an iron rod into a coil in series with a bulb increases L and XL → bulb glows less.
AC voltage applied to a capacitor
- In dc, a capacitor stops current once charged; in ac it limits the current but does not stop it (charged and discharged each half cycle).
- q = Cv → i = im sin(ωt + π/2), with im = ωC vm.
- Capacitive reactance XC = 1/ωC (unit ohm); inversely ∝ frequency and capacitance.
- Current leads the voltage by π/2.
- Average power over a cycle = zero.
- Example 7.3: lamp + capacitor on dc → no glow; on ac → glows; reducing C raises XC → glows less.
- Example 7.4: 15.0 µF, 220 V, 50 Hz → XC = 212 Ω, I = 1.04 A, peak 1.47 A. Doubling frequency halves XC and doubles current.
Series LCR circuit
- Same current through L, C and R: i = im sin(ωt + φ).
- VR is in phase with I; VL is π/2 ahead of I; VC is π/2 behind I.
- vm² = vRm² + (vCm − vLm)², so im = vm / √(R² + (XC − XL)²).
- Impedance Z = √(R² + (XC − XL)²); tan φ = (XC − XL)/R (impedance diagram: right triangle with Z as hypotenuse).
- XC > XL: φ positive, capacitive, current leads voltage. XC < XL: φ negative, inductive, current lags.
- The phasor method gives the steady-state solution; the general solution = transient + steady state; the transient dies out with time.
- Example 7.6: R = 200 Ω, C = 15.0 µF, 220 V, 50 Hz → Z ≈ 291.5 Ω, I = 0.755 A, VR = 151 V, VC = 160.3 V. VR + VC = 311.3 V > 220 V, but √(VR² + VC²) = 220 V (they are 90° out of phase).
Resonance
- At ω0, XC = XL, so Z = R (minimum) and current amplitude is maximum (vm/R).
- ω0 = 1/√(LC).
- NCERT Fig. 7.14: L = 1.00 mH, C = 1.00 nF → ω0 = 1.00 × 10^6 rad/s; R = 100 Ω gives twice the peak current of R = 200 Ω.
- Radio/TV tuning: vary C so that the circuit's resonant frequency matches the station's frequency.
- Resonance needs both L and C; no resonance in an RL or RC circuit.
- Quality factor (NCERT table): Q = ω0L/R = 1/(ω0CR), dimensionless.
- Example 7.10: an airport metal detector works on resonance: metal changes the impedance, the current changes, and an alarm sounds.
Power in an ac circuit: power factor
- Average power P = V I cos φ = I² Z cos φ; cos φ = power factor (= R/Z).
- Pure R: φ = 0, cos φ = 1, maximum power.
- Pure L or pure C: φ = π/2, cos φ = 0, no power although current flows: wattless current.
- LCR: power is dissipated only in the resistor.
- At resonance: cos φ = 1, P = I²R, maximum power.
- Example 7.7: a low power factor means a larger current for the same power → large I²R loss in transmission. Power factor is improved by a capacitor in parallel, which cancels the lagging wattless component Iq; Ip (in phase with V) is the power component.
- Example 7.8: vm = 283 V, 50 Hz, R = 3 Ω, L = 25.48 mH, C = 796 µF → XL = 8 Ω, XC = 4 Ω, Z = 5 Ω, φ = −53.1° (current lags), I = 40 A, P = 4800 W, power factor 0.6.
- Example 7.9: same circuit at resonance → ω0 = 222.1 rad/s, ν0 = 35.4 Hz, Z = 3 Ω, I = 66.7 A, P = 13.35 kW.
- Power rating of an ac element is its average power; the power consumed is never negative.
Transformers
- Changes ac voltage using mutual induction; two insulated coils on a soft-iron core (one over the other, or on separate limbs).
- Ideal transformer: Vs/Vp = Ns/Np and Is/Ip = Np/Ns; with 100% efficiency, Ip Vp = Is Vs.
- Assumptions: primary resistance and current small; same flux links both coils; secondary current small. Well-designed transformers can exceed 95% efficiency.
- Step-up: Ns > Np → Vs > Vp, Is < Ip. Example: 100 → 200 turns, 220 V at 10 A → 440 V at 5.0 A.
- Step-down: Ns < Np → Vs < Vp, Is > Ip.
- Energy losses and fixes:
- Flux leakage → wind primary and secondary one over the other.
- Resistance of windings (I²R) → thick wire for high-current windings.
- Eddy currents in the core → laminated core.
- Hysteresis → core material with low hysteresis loss.
- Transmission: generator voltage is stepped up (current falls, I²R loss falls), transmitted, then stepped down at sub-stations and utility poles before 240 V reaches homes.
- A step-up transformer does not violate energy conservation: current is reduced in the same proportion.
- Motor: electric → mechanical; generator: mechanical → electric.
Formula table
| Formula | Meaning of symbols | When to use |
|---|---|---|
I = im/√2, V = vm/√2 |
rms (effective) values, 0.707 × peak | Converting peak and rms |
P = I²R = V²/R = IV |
rms values | Average power in a resistor |
XL = ωL = 2πνL |
ohm | Pure inductor; current lags by π/2 |
XC = 1/ωC = 1/(2πνC) |
ohm | Pure capacitor; current leads by π/2 |
Z = √(R² + (XC − XL)²) |
Impedance, ohm | Series LCR |
im = vm/Z, I = V/Z |
Peak or rms | Current in LCR |
tan φ = (XC − XL)/R |
φ phase of current w.r.t. voltage | Lead or lag in LCR |
ω0 = 1/√(LC), ν0 = 1/(2π√(LC)) |
Resonant frequency | Resonance, tuning |
Q = ω0L/R = 1/(ω0CR) |
Quality factor (dimensionless) | Sharpness of resonance |
P = VI cos φ = I²Z cos φ |
cos φ = R/Z power factor | Average power in any ac circuit |
Vs/Vp = Ns/Np, Is/Ip = Np/Ns |
N turns | Ideal transformer |
Important tables and comparisons
R, L and C in ac
| Element | Opposition | Phase of current | Average power |
|---|---|---|---|
| Resistor | R | In phase with voltage | V²/R (maximum) |
| Inductor | XL = ωL (rises with ν) | Lags by π/2 | Zero |
| Capacitor | XC = 1/ωC (falls with ν) | Leads by π/2 | Zero |
Power factor cases
| Circuit | φ | cos φ | Power |
|---|---|---|---|
| Pure R | 0 | 1 | Maximum |
| Pure L or pure C | π/2 | 0 | Zero (wattless current) |
| LCR (general) | tan^-1 (XC − XL)/R | R/Z | Only in R |
| LCR at resonance | 0 | 1 | Maximum, I²R |
Units and dimensions (NCERT table)
| Quantity | Dimensions | Unit |
|---|---|---|
| rms voltage | [M L² T^-3 A^-1] | V |
| rms current | [A] | A |
| XL, XC, Z | [M L² T^-3 A^-2] | Ω |
| Resonant frequency | [T^-1] | Hz |
| Quality factor, power factor | Dimensionless | none |
Transformer losses
| Loss | Reduced by |
|---|---|
| Flux leakage | Winding coils one over the other |
| Winding resistance | Thick wire |
| Eddy currents | Laminated core |
| Hysteresis | Low-hysteresis core material |
Diagrams to revise
- Fig. 7.2 and 7.4: resistor: v and i in phase; phasors along the same line.
- Fig. 7.3: I = im/√2 = 0.707 im.
- Fig. 7.6: inductor: current phasor π/2 behind voltage.
- Fig. 7.8: capacitor: current phasor π/2 ahead of voltage.
- Fig. 7.11 and 7.12: LCR phasors (VL and VC opposite, VR along I) and the impedance triangle (R, XC − XL, Z).
- Fig. 7.14: current amplitude vs ω peaks at ω0; smaller R gives a taller peak.
- Fig. 7.15: current split into power component Ip and wattless component Iq.
- Fig. 7.16: transformer windings on a soft-iron core, one over the other or on separate limbs.
NEET traps in this chapter
- ⚠️ ac voltmeters and ammeters, and household values (220 V or 240 V), give rms values, not peak.
- ⚠️ In an inductor current lags; in a capacitor current leads (both by π/2).
- ⚠️ Raising the frequency increases XL but decreases XC.
- ⚠️ Voltages across R, L and C cannot be added arithmetically; use phasors (√(VR² + VC²)).
- ⚠️ Resonance is impossible in an RL or RC circuit; it needs both L and C.
- ⚠️ At resonance Z = R (minimum) and current is maximum, not zero.
- ⚠️ A pure inductor or capacitor carries current but consumes no average power (wattless current).
- ⚠️ A transformer works only with ac (it needs a changing flux) and conserves energy: stepping up voltage steps down current.
Practice questions
Try each question, then check the answer key below. Get instant answers and explanations for more Alternating Current questions on TrackPrep.
Q1. A capacitor of capacitance (50/π) µF is connected to a 220 V, 50 Hz ac supply. The rms current in the circuit is
- (A) 0.55 A
- (B) 1.1 A
- (C) 2.2 A
- (D) 1.56 A
👉 Solve this and more Alternating Current questions on TrackPrep
Q2. A series LCR circuit has R = 30 Ω, XL = 80 Ω and XC = 40 Ω and is connected to a 200 V (rms) ac source. The average power dissipated in the circuit is
- (A) 800 W
- (B) 640 W
- (C) 480 W
- (D) 360 W
👉 Solve this and more Alternating Current questions on TrackPrep
Q3. An ideal transformer has 500 turns in the primary and 50 turns in the secondary. The primary is connected to a 220 V ac supply and the secondary delivers 5 A to a load. The secondary voltage and the primary current are
- (A) 2200 V and 50 A
- (B) 22 V and 50 A
- (C) 2200 V and 0.5 A
- (D) 22 V and 0.5 A
👉 Solve this and more Alternating Current questions on TrackPrep
Q4. When an ac voltage is applied to a pure inductor, the current
- (A) is in phase with the voltage
- (B) leads the voltage by π/2
- (C) lags the voltage by π/2
- (D) lags the voltage by π
👉 Solve this and more Alternating Current questions on TrackPrep
Q5. A current that flows in a circuit without any average power being dissipated is called a wattless current. It flows when the circuit contains
- (A) only a pure resistor
- (B) only a pure inductor or only a pure capacitor
- (C) an LCR combination at resonance
- (D) a resistor and a capacitor in series
👉 Solve this and more Alternating Current questions on TrackPrep
Q6. How many of the following statements are correct?
- The average power supplied to a pure inductor over a complete cycle is zero.
- The household supply of 220 V refers to its peak value.
- At resonance, the impedance of a series LCR circuit equals its resistance.
- Resonance can occur in a series RC circuit.
- A laminated core reduces eddy current losses in a transformer.
- (A) Two
- (B) Three
- (C) Four
- (D) Five
👉 Solve this and more Alternating Current questions on TrackPrep
Q7. Match List I with List II.
| List I | List II |
|---|---|
| A. Inductive reactance | i. 1/√(LC) |
| B. Capacitive reactance | ii. ω0L/R |
| C. Resonant angular frequency | iii. ωL |
| D. Quality factor | iv. 1/ωC |
- (A) A-iii, B-iv, C-i, D-ii
- (B) A-iv, B-iii, C-i, D-ii
- (C) A-iii, B-iv, C-ii, D-i
- (D) A-i, B-iv, C-iii, D-ii
👉 Solve this and more Alternating Current questions on TrackPrep
Q8. Assertion (A): A step-up transformer does not violate the law of conservation of energy. Reason (R): When the voltage is stepped up, the current is reduced in the same proportion.
- (A) Both A and R are true and R is the correct explanation of A.
- (B) Both A and R are true but R is not the correct explanation of A.
- (C) A is true but R is false.
- (D) A is false but R is true.
👉 Solve this and more Alternating Current questions on TrackPrep
Answer key
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 |
|---|---|---|---|---|---|---|---|
| B | C | D | C | B | B | A | A |
- Q1: XC = 1/(2π × 50 × (50/π) × 10^-6) = 1/(5000 × 10^-6) = 200 Ω; I = 220/200 = 1.1 A.
- Q2: Z = √(30² + 40²) = 50 Ω; I = 200/50 = 4 A; P = I²R = 16 × 30 = 480 W (or VI cos φ = 200 × 4 × 0.6).
- Q3: Vs = 220 × 50/500 = 22 V; Ip = Is × Ns/Np = 5 × 50/500 = 0.5 A.
- Q4: i = im sin(ωt − π/2): current lags by a quarter cycle.
- Q5: For pure L or pure C, φ = π/2 and cos φ = 0.
- Q6: Statements 1, 3 and 5 are correct; 220 V is an rms value, and resonance needs both L and C.
- Q7: ωL, 1/ωC, 1/√(LC) and ω0L/R.
- Q8: Power in = power out (IpVp = IsVs), so a higher voltage comes with a lower current.
Got one wrong? Ask Jojo, the AI teacher, to explain it on a whiteboard: ask your doubt on TrackPrep
Practise Alternating Current on TrackPrep
- ✅ Page-wise NCERT MCQs for Alternating Current, with explanations
- ✅ Chapter-wise PYQs
- ✅ NCERT line-by-line lecture by Anmol Sir
- ✅ Jojo, the AI teacher, for any doubt, in Hindi, English or Hinglish
👉 Start practising Alternating Current on TrackPrep
Previous chapter: Electromagnetic Induction · Next chapter: Electromagnetic Waves · All chapters: NEET Physics chapter-wise notes and questions
Deep dives for this chapter
Frequently asked questions
Is Alternating Current important for NEET 2027?
Yes. NEET Physics has 45 questions (180 marks), and this chapter gives short, formula-based numericals on reactance, impedance, resonance, power factor and transformers. Most of them can be solved in under a minute once the formulas are clear.
Which topics of Alternating Current should I revise first?
Start with rms values and the phase relations for R, L and C. Then revise impedance and tan φ for the series LCR circuit, resonance (ω0 = 1/√(LC)) and power factor. Finish with transformer ratios and energy losses.
How do I revise Alternating Current quickly before NEET?
Use the formula table and the R, L, C comparison table above, then solve NCERT Examples 7.4, 7.6, 7.8 and 7.9. Read the traps list once, especially rms vs peak and lead vs lag.
Where can I practise more Alternating Current questions?
TrackPrep has page-wise NCERT MCQs and chapter-wise PYQs for Alternating Current, plus NTA-style CBT mock tests. Send a photo of any tricky LCR numerical to Jojo, the AI teacher, for a step-by-step whiteboard solution.
What is alternating current?
Alternating current (ac) is a current whose magnitude and direction change with time, usually like a sine function, such as i = im sin ωt. The mains supply in homes and offices is an alternating voltage of this kind, and the current it drives in a circuit is the alternating current. Most of the electrical energy sold by power companies is transmitted and distributed as ac.
What is the difference between alternating current and direct current?
Direct current (dc) does not change direction with time, while alternating current (ac) keeps reversing direction and varies like a sine function. The average of an ac current over a cycle is zero, so ac is described by its rms value, I = im/√2 = 0.707 im, which is the dc current that would give the same average heating. Both ac and dc are measured in amperes, and in rms values the dc relations V = IR and P = I²R keep the same form.
Why is alternating current used more than direct current today?
AC is preferred mainly because ac voltages can be easily and efficiently changed from one value to another by transformers. This lets power be transmitted economically over long distances: the voltage is stepped up so the current, and hence the I²R loss in the lines, is reduced, and then stepped down for use. AC circuits also have useful properties such as resonance, which is used when a radio is tuned to a station.
How is alternating current measured?
AC quantities are usually measured and specified as rms (root mean square) values. The rms current is I = im/√2 and the rms voltage is V = vm/√2, so the household supply of 220 V is an rms value whose peak is about 311 V. One ampere of rms ac is defined as the current that produces the same average heating effect as one ampere of dc.
Last updated: 21 November 2026.
- physics
- class 12
- neet 2027
- notes
- alternating current
