Colligative Properties Numericals for NEET 2027: Formulas, Solved Examples and van't Hoff Factor
All four colligative properties from NCERT Class 12 Solutions with the formula sheet, Kb and Kf values, six fresh solved numericals (vapour pressure, boiling point, freezing point, molar mass, osmotic pressure, van't Hoff factor), unit traps and 5 NEET-style MCQs with answers.
By Anmol Sharma9 min read

Colligative properties: key highlights
| Particulars | Details |
|---|---|
| Chapter | Solutions (NCERT Class 12 Chemistry, Chapter 1) |
| Meaning | Properties that depend on the number of solute particles, not their nature |
| The four | Relative lowering of vapour pressure, elevation of boiling point, depression of freezing point, osmotic pressure |
| Concentration used | Mole fraction (vapour pressure), molality (ΔTb, ΔTf), molarity (osmotic pressure) |
| Correction factor | van't Hoff factor i (i > 1 dissociation, i < 1 association) |
| Use | Finding the molar mass of a solute |
In one line: Colligative properties depend only on the number of solute particles: Δp/p° = x₂, ΔTb = iKb·m, ΔTf = iKf·m and Π = iCRT, so most NEET numericals are "find the particles, then plug into one formula".
📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.
Table of contents
- The formula sheet
- Kb and Kf values from NCERT
- Six solved numericals
- van't Hoff factor and abnormal molar mass
- Diagram labels to know
- NEET traps in colligative numericals
- 5 NEET-style MCQs on colligative properties
- Practise on TrackPrep
- Frequently asked questions
The formula sheet
Here 1 = solvent, 2 = solute, w = mass in grams, M = molar mass, m = molality, C = molarity.
| Property | Formula | Molar mass form |
|---|---|---|
| Relative lowering of vapour pressure | (p₁° − p₁)/p₁° = x₂ ≈ n₂/n₁ (dilute) | (p₁° − p₁)/p₁° = (w₂ × M₁)/(M₂ × w₁) |
| Elevation of boiling point | ΔTb = Kb × m | M₂ = (Kb × w₂ × 1000)/(ΔTb × w₁) |
| Depression of freezing point | ΔTf = Kf × m | M₂ = (Kf × w₂ × 1000)/(ΔTf × w₁) |
| Osmotic pressure | Π = CRT = (n₂/V)RT | M₂ = (w₂RT)/(ΠV) |
| With van't Hoff factor | multiply the right side by i | — |
- Molality m = (w₂/M₂) × 1000/w₁ (moles of solute per kg of solvent).
- Units: Kb and Kf are in K kg mol⁻¹. In osmotic pressure, use V in litres and R = 0.083 L bar mol⁻¹ K⁻¹ to get Π in bar.
Kb and Kf values from NCERT
From NCERT Table 1.3 (the ones NEET uses most):
| Solvent | b.p. (K) | Kb (K kg mol⁻¹) | f.p. (K) | Kf (K kg mol⁻¹) |
|---|---|---|---|---|
| Water | 373.15 | 0.52 | 273.0 | 1.86 |
| Ethanol | 351.5 | 1.20 | 155.7 | 1.99 |
| Benzene | 353.3 | 2.53 | 278.6 | 5.12 |
| Chloroform | 334.4 | 3.63 | 209.6 | 4.79 |
| Acetic acid | 391.1 | 2.93 | 290.0 | 3.90 |
Kb and Kf depend on the solvent, not the solute.
Six solved numericals
1. Relative lowering of vapour pressure
6 g urea (M = 60) is dissolved in 90 g water (M = 18). The vapour pressure of pure water is 30 mm Hg. Find the vapour pressure of the solution.
- n₂ = 6/60 = 0.1 mol; n₁ = 90/18 = 5 mol
- x₂ = 0.1/(5 + 0.1) = 0.0196
- Δp = x₂ × p° = 0.0196 × 30 = 0.59 mm Hg
- p = 30 − 0.59 = 29.41 mm Hg
2. Elevation of boiling point
34.2 g sucrose (M = 342) in 500 g water. Kb = 0.52 K kg mol⁻¹.
- moles = 0.1; m = 0.1/0.5 = 0.2 mol kg⁻¹
- ΔTb = 0.52 × 0.2 = 0.104 K; boiling point = 373.15 + 0.104 = 373.254 K
3. Depression of freezing point
3.1 g ethylene glycol (M = 62) in 250 g water. Kf = 1.86 K kg mol⁻¹.
- moles = 0.05; m = 0.05/0.25 = 0.2 mol kg⁻¹
- ΔTf = 1.86 × 0.2 = 0.372 K; freezing point ≈ 273.15 − 0.372 = 272.78 K
4. Molar mass from ΔTf
2 g of a non-electrolyte in 100 g benzene lowers its freezing point by 0.512 K. Kf = 5.12 K kg mol⁻¹.
- M₂ = (5.12 × 2 × 1000)/(0.512 × 100) = 200 g mol⁻¹
5. Molar mass from osmotic pressure
1 g of a protein in 100 mL solution at 300 K gives Π = 2.49 × 10⁻³ bar.
- M₂ = w₂RT/(ΠV) = (1 × 0.083 × 300)/(2.49 × 10⁻³ × 0.1) = 1.0 × 10⁵ g mol⁻¹
This is why NCERT says osmotic pressure is the preferred method for proteins, polymers and biomolecules: the effect is large even for very dilute solutions, it is measured near room temperature, and it uses molarity.
6. With van't Hoff factor
Find ΔTf of a 0.1 m aqueous NaCl solution, assuming complete dissociation. Kf = 1.86.
- NaCl → Na⁺ + Cl⁻, so i = 2
- ΔTf = i × Kf × m = 2 × 1.86 × 0.1 = 0.372 K (double the value for 0.1 m glucose)
van't Hoff factor and abnormal molar mass
When a solute dissociates or associates, the number of particles changes, so the molar mass found from a colligative property is abnormal.
- i = normal molar mass / abnormal molar mass
- i = observed colligative property / calculated colligative property
- i = total moles of particles after / moles of particles before association or dissociation
| Case | Example (NCERT) | Particles | i | Experimental molar mass |
|---|---|---|---|---|
| Dissociation | KCl in water | Increase | Close to 2 | Lower than true value |
| Association | Ethanoic acid in benzene (dimerises by hydrogen bonding) | Decrease | Nearly 0.5 | About twice the true value |
| No change | Glucose, urea in water | Same | 1 | Normal |
NCERT Table 1.4 shows that for NaCl, KCl and MgSO₄, i approaches 2 and for K₂SO₄ it approaches 3 as the solution becomes very dilute.
Diagram labels to know
From NCERT Figures 1.7, 1.8, 1.10 and 1.11:
| Figure | Labels | What it shows |
|---|---|---|
| 1.7 | Solvent, Solution, 1.013 bar or 1 atm, Tb°, Tb, ΔTb | Solution's vapour pressure curve lies below; it reaches 1.013 bar at a higher temperature |
| 1.8 | Liquid solvent, frozen solvent, solution, Tf, Tf°, ΔTf | Solution's curve meets the solid-solvent curve at a lower temperature |
| 1.10 | p_atm + Π (solution side), p_atm (solvent side), SPM | Extra pressure equal to Π stops osmosis |
| 1.11 | Piston, Pressure > Π, Salt water, Fresh water, SPM, water outlet | Reverse osmosis used for desalination (cellulose acetate membrane) |
NEET traps in colligative numericals
- Using grams of solution instead of kg of solvent. Molality uses kg of solvent only.
- Using molality in Π = CRT. Osmotic pressure uses molarity (moles per litre of solution).
- Forgetting i for electrolytes. 0.1 m NaCl gives about twice the effect of 0.1 m glucose.
- Thinking Kb depends on the solute. It depends only on the solvent.
- Mixing up hypertonic and hypotonic. Above 0.9% (mass/volume) NaCl is hypertonic (cells shrink); below it is hypotonic (cells swell).
- Expecting a higher molar mass on dissociation. Dissociation gives a lower experimental molar mass; association gives a higher one.
5 NEET-style MCQs on colligative properties
Q1. 12 g of urea (M = 60 g mol⁻¹) is dissolved in 500 g of water. Kf = 1.86 K kg mol⁻¹. The depression in freezing point is: (A) 0.372 K (B) 0.744 K (C) 0.186 K (D) 1.86 K
👉 Solve this and more Solutions questions on TrackPrep
Q2. Assuming complete dissociation, which 0.1 m aqueous solution has the highest boiling point? (A) Glucose (B) Urea (C) NaCl (D) K₂SO₄
👉 Solve this and more Solutions questions on TrackPrep
Q3. The vapour pressure of a pure solvent is 100 mm Hg. A non-volatile solute is added so that its mole fraction is 0.05. The vapour pressure of the solution is: (A) 5 mm Hg (B) 95 mm Hg (C) 99.5 mm Hg (D) 105 mm Hg
👉 Solve this and more Solutions questions on TrackPrep
Q4. If ethanoic acid completely dimerises in benzene, its van't Hoff factor is: (A) 2 (B) 1 (C) 0.5 (D) 0.25
👉 Solve this and more Solutions questions on TrackPrep
Q5. The osmotic pressure of a 0.1 M solution of a non-electrolyte at 300 K (R = 0.083 L bar mol⁻¹ K⁻¹) is: (A) 0.249 bar (B) 2.49 bar (C) 24.9 bar (D) 0.0249 bar
👉 Solve this and more Solutions questions on TrackPrep
Answer key
| Q | Answer | Why |
|---|---|---|
| 1 | B | 0.2 mol ÷ 0.5 kg = 0.4 m; 1.86 × 0.4 = 0.744 K |
| 2 | D | K₂SO₄ gives 3 ions (i = 3), the most particles |
| 3 | B | Δp = 0.05 × 100 = 5; p = 100 − 5 = 95 mm Hg |
| 4 | C | 2 molecules → 1 dimer, so particles halve: i = 0.5 |
| 5 | B | Π = CRT = 0.1 × 0.083 × 300 = 2.49 bar |
Practise on TrackPrep
- ✅ Page-wise NCERT MCQs for Solutions, including every in-text numerical type
- ✅ Chapter-wise and year-wise PYQs on colligative properties
- ✅ Stuck on a step? Snap a photo of the numerical and ask Jojo, the AI teacher, who solves it on a whiteboard in Hindi, English or Hinglish
- ✅ Build a custom test of only colligative numericals and track mistakes in your Mistake Book
👉 Start practising free on TrackPrep
📲 Download the TrackPrep app for more practice: Get TrackPrep on Google Play
Related: Solutions: NEET notes and questions · NEET Chemistry chapter-wise notes
Frequently asked questions
What are the four colligative properties?
Relative lowering of vapour pressure of the solvent, elevation of boiling point, depression of freezing point, and osmotic pressure of the solution. All depend on the number of solute particles, not their identity.
Why is molality used for ΔTb and ΔTf but molarity for osmotic pressure?
Boiling and freezing involve temperature changes, and molality (per kg of solvent) does not change with temperature. Osmotic pressure is measured around room temperature, so NCERT uses molarity in Π = CRT.
What is the van't Hoff factor?
It is the factor i that corrects colligative properties for dissociation or association. It equals normal molar mass divided by abnormal molar mass; i > 1 for dissociation and i < 1 for association.
Why is osmotic pressure used for the molar mass of proteins?
Its value is large even for very dilute solutions, it is measured near room temperature (proteins are not stable at high temperature), and polymers have poor solubility, as NCERT explains.
Last updated: 21 November 2026.
- chapter notes
- topic
- neet 2027
- chemistry
