Skip to content
TrackPrep

Solutions NEET Notes and Important Questions (Class 12 Chemistry)

Quick NEET revision of NCERT Class 12 Chemistry Chapter 1, Solutions. Concentration units, Henry's law, Raoult's law, ideal and non-ideal solutions, azeotropes, the four colligative properties, van't Hoff factor and 8 NEET-style MCQs with an answer key.

By Anmol Sharma17 min read

Cartoon student at a laptop: Solutions NEET notes and important questions, Class 12 Chemistry

Solutions: key highlights

Particulars Details
Class and chapter NCERT Class 12 Chemistry, Chapter 1
Unit Solutions (Physical Chemistry)
Key topics Concentration terms, Henry's law, Raoult's law, ideal and non-ideal solutions, azeotropes, colligative properties, osmosis and reverse osmosis, van't Hoff factor
How NEET asks it ΔTb, ΔTf and osmotic pressure numericals, vapour pressure and vapour composition, deviation examples, van't Hoff factor, assertion-reason
Revision time 50-65 minutes for these notes

In one line: A non-volatile solute lowers the vapour pressure of the solvent, and every colligative property (ΔTb, ΔTf, osmotic pressure) follows from that drop and depends only on the number of solute particles.

📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.

Table of contents

Download the NCERT PDF

Book Chapter Official PDF
NCERT Class 12 Chemistry Chapter 1: Solutions 📥 Download Solutions NCERT PDF (ncert.nic.in)

Read the official NCERT chapter alongside these notes. Every note and question on this page is based on it.

Short notes for quick revision

Types of solutions

  • A solution is a homogeneous mixture of two or more components. The component present in the largest quantity is the solvent; it decides the physical state of the solution. The rest are solutes.
  • NCERT deals with binary solutions (two components).
  • Nine types (Table 1.1). Exam favourites: hydrogen in palladium (gas in solid), amalgam of mercury with sodium (liquid in solid), copper dissolved in gold (solid in solid), camphor in nitrogen gas (solid in gas), chloroform mixed with nitrogen gas (liquid in gas).
  • Everyday facts: 1 ppm fluoride prevents tooth decay, 1.5 ppm causes mottled teeth; sodium fluoride is used in rat poison.

Expressing concentration

  • Mass % (w/w): 10% glucose = 10 g glucose in 90 g water. Commercial bleach has 3.62 mass % sodium hypochlorite.
  • Volume % (V/V): 10 mL ethanol made up to 100 mL. 35% (v/v) ethylene glycol (antifreeze) lowers the freezing point of water to 255.4 K (–17.6 °C).
  • Mass by volume % (w/V): mass of solute in 100 mL of solution; used in medicine and pharmacy.
  • ppm: for trace amounts; a litre of sea water (1030 g) has about 6 × 10–3 g dissolved O2, i.e. 5.8 ppm.
  • Mole fraction (x): sum of all mole fractions = 1.
  • Molarity (M): moles of solute per litre of solution.
  • Molality (m): moles of solute per kg of solvent. 1.00 m KCl = 74.5 g KCl in 1 kg water.
  • Mass %, ppm, mole fraction and molality do not depend on temperature; molarity does, because volume changes with temperature.

Solubility of a solid in a liquid

  • Like dissolves like: NaCl and sugar dissolve in water; naphthalene and anthracene dissolve in benzene.
  • Dissolution and crystallisation reach dynamic equilibrium → saturated solution; its concentration is the solubility.
  • Temperature (Le Chatelier): if ΔsolH > 0 (endothermic), solubility rises with temperature; if ΔsolH < 0, it falls.
  • Pressure has no significant effect (solids and liquids are highly incompressible).

Solubility of a gas: Henry's law

  • At constant temperature, solubility of a gas is directly proportional to its partial pressure above the liquid. Common form: p = KH x.
  • Higher KH = lower solubility. KH depends on the nature of the gas.
  • KH of N2 and O2 increases with temperature, so gases are less soluble in warm water; aquatic species are more comfortable in cold water.
  • Dissolving a gas is like condensation, so it is exothermic: solubility of gases falls as temperature rises.
  • Applications:
    • Soft drinks and soda water are sealed under high CO2 pressure.
    • Bends in scuba divers: nitrogen bubbles in blood when the pressure drops; tanks use air diluted with helium (11.7% He, 56.2% N2, 32.1% O2).
    • Anoxia at high altitudes: low partial pressure of O2, so climbers become weak and cannot think clearly.

Raoult's law and vapour pressure

  • For a solution of volatile liquids: p1 = p1° x1, p2 = p2° x2; Dalton's law gives ptotal = p1 + p2 = p1° + (p2° – p1°) x2.
  • ptotal varies linearly with x2; it lies between p1° and p2°.
  • Vapour phase: pi = yi ptotal. The vapour is always richer in the more volatile component (CH2Cl2 + CHCl3 example: y of CH2Cl2 = 0.82).
  • Raoult's law is a special case of Henry's law with KH = p1°.
  • A non-volatile solute lowers the vapour pressure because solute particles occupy part of the surface. The lowering depends on the amount of solute, not its nature (1 mol sucrose ≈ 1 mol urea in 1 kg water).

Ideal and non-ideal solutions

  • Ideal: obey Raoult's law over the whole concentration range; ΔmixH = 0, ΔmixV = 0; A–B interactions ≈ A–A and B–B. Examples: n-hexane + n-heptane, bromoethane + chloroethane, benzene + toluene.
  • Positive deviation: A–B interactions weaker, vapour pressure higher than predicted. Examples: ethanol + acetone (acetone breaks H-bonds of ethanol), carbon disulphide + acetone.
  • Negative deviation: A–B interactions stronger, vapour pressure lower. Examples: phenol + aniline (H-bond between phenolic H and N of aniline), chloroform + acetone (chloroform H-bonds with acetone).
  • Azeotropes: same composition in liquid and vapour, boil at constant temperature, cannot be separated by fractional distillation.
    • Minimum boiling (large positive deviation): ethanol-water, about 95% ethanol by volume.
    • Maximum boiling (large negative deviation): nitric acid-water, about 68% HNO3 and 32% water by mass, b.p. 393.5 K.

Colligative properties

  • Depend on the number of solute particles, not their nature (Latin co = together, ligare = to bind).
  • Relative lowering of vapour pressure = (p1° – p1)/p1° = x2 (mole fraction of solute).
  • Elevation of boiling point: the solution must be heated above the solvent's b.p. for its vapour pressure to reach 1.013 bar. ΔTb = Kb m. 1 mol sucrose in 1000 g water boils at 373.52 K.
  • Depression of freezing point: the solution freezes when its vapour pressure equals that of the pure solid solvent. ΔTf = Kf m.
  • Kb (ebullioscopic constant) and Kf (cryoscopic constant) depend on the solvent; unit K kg mol–1. For water, Kb = 0.52 and Kf = 1.86 K kg mol–1.

Osmosis and osmotic pressure

  • Semipermeable membrane (SPM): lets solvent through, not solute; natural (pig's bladder, parchment) or synthetic (cellophane).
  • Osmosis: solvent flows from pure solvent (or dilute solution) to concentrated solution.
  • Osmotic pressure (π): excess pressure on the solution side that just stops osmosis. π = CRT.
  • Best method for molar masses of proteins, polymers and macromolecules: works at room temperature, uses molarity, and gives a large value even for very dilute solutions; biomolecules are unstable at high temperature.
  • Isotonic: same osmotic pressure, no osmosis. Blood-cell fluid ≈ 0.9% (m/V) NaCl = normal saline, safe to inject intravenously.
    • Hypertonic (> 0.9%): water leaves cells, cells shrink.
    • Hypotonic (< 0.9%): water enters cells, cells swell.
  • Examples: raw mango shrivels in brine; wilted flowers revive in fresh water; limp carrot becomes firm in water; salty food causes edema; salting meat and sugaring fruit kill bacteria.
  • Reverse osmosis: pressure larger than π pushes pure solvent out of the solution; used for desalination of sea water with cellulose acetate membranes.

Abnormal molar mass and van't Hoff factor

  • Dissociation (KCl in water) → more particles → experimental molar mass lower than true value.
  • Association (ethanoic acid dimerises in benzene, low dielectric constant solvent, via H-bonding) → fewer particles → experimental molar mass higher (about twice).
  • van't Hoff factor (1880): i = normal molar mass / abnormal molar mass = observed / calculated colligative property = moles of particles after / before association or dissociation.
  • Association: i < 1 (ethanoic acid in benzene ≈ 0.5). Dissociation: i > 1 (aqueous KCl ≈ 2).
  • Modified equations: ΔTb = i Kb m, ΔTf = i Kf m, π = i n2RT/V, relative lowering = i n2/n1.

Formula table

Formula Meaning of symbols When to use
Mass % = (mass of component / total mass of solution) × 100 w/w percentage by mass
ppm = (parts of component / total parts) × 10^6 trace amounts pollutants, dissolved O2
xA = nA / (nA + nB); x1 + x2 + ... = 1 n = moles vapour pressure, gas mixtures
M = moles of solute / volume of solution (L) unit mol L–1 titration, π = CRT
m = moles of solute / mass of solvent (kg) = (w2 × 1000)/(M2 × w1) w1 = solvent mass in g ΔTb, ΔTf
p = KH x KH = Henry's constant (kbar or Pa) solubility of gases
ptotal = p1° + (p2° – p1°) x2; pi = yi ptotal y = mole fraction in vapour mixture of two volatile liquids
(p1° – p1)/p1° = x2 ≈ (w2 × M1)/(M2 × w1) dilute solution, non-volatile solute molar mass from vapour pressure
ΔTb = Kb m; M2 = (Kb × w2 × 1000)/(ΔTb × w1) Kb in K kg mol–1 boiling point elevation
ΔTf = Kf m; M2 = (Kf × w2 × 1000)/(ΔTf × w1) Kf in K kg mol–1 freezing point depression
Kf = (R × M1 × Tf²)/(1000 × ΔfusH); Kb = (R × M1 × Tb²)/(1000 × ΔvapH) M1 = molar mass of solvent origin of the constants
π = CRT = (n2/V)RT; M2 = (w2 RT)/(π V) R = 0.083 L bar mol–1 K–1, V in L osmotic pressure, protein molar mass
i = normal molar mass / abnormal molar mass i > 1 dissociation, i < 1 association electrolytes, dimers
ΔTb = i Kb m, ΔTf = i Kf m, π = i CRT van't Hoff factor included electrolyte numericals

Important tables and comparisons

Positive versus negative deviation

Feature Positive deviation Negative deviation
A–B interaction weaker than A–A, B–B stronger than A–A, B–B
Vapour pressure higher than Raoult's law lower than Raoult's law
Escaping tendency increases decreases
Examples (NCERT) ethanol + acetone, CS2 + acetone phenol + aniline, chloroform + acetone
Azeotrope minimum boiling (ethanol-water, about 95% ethanol by volume) maximum boiling (HNO3-water, about 68% HNO3, 393.5 K)

Kb and Kf of common solvents (Table 1.3, K kg mol–1)

Solvent Kb Kf
Water 0.52 1.86
Ethanol 1.20 1.99
Benzene 2.53 5.12
Chloroform 3.63 4.79
Carbon tetrachloride 5.03 31.8
Cyclohexane 2.79 20.00
Acetic acid 2.93 3.90

Henry's law constants (Table 1.2)

Gas T (K) KH (kbar)
He 293 144.97
N2 293 / 303 76.48 / 88.84
O2 293 / 303 34.86 / 46.82
H2 293 69.16
CO2 298 1.67
Methane 298 0.413

van't Hoff factor (Table 1.4)

Salt 0.1 m 0.01 m 0.001 m Complete dissociation
NaCl 1.87 1.94 1.97 2.00
KCl 1.85 1.94 1.98 2.00
MgSO4 1.21 1.53 1.82 2.00
K2SO4 2.32 2.70 2.84 3.00

Diagrams to revise

  • Fig. 1.1 Effect of pressure on gas solubility: compressing the gas raises solubility.
  • Fig. 1.2 HCl in cyclohexane at 293 K: p versus x is a straight line; slope = KH.
  • Fig. 1.3 Ideal solution: p1 and p2 are straight lines (I, II); ptotal (III) runs from p1° to p2°.
  • Fig. 1.6 (a) and (b): ptotal curve above the Raoult line (positive) or below it (negative).
  • Fig. 1.7 and 1.8: solution vapour pressure curve lies below the solvent's, giving ΔTb and ΔTf.
  • Fig. 1.9 to 1.11: thistle funnel (solution level rises), pressure applied to stop osmosis, reverse osmosis for sea water.

NEET traps in this chapter

  • ⚠️ Molarity changes with temperature; molality, mole fraction, mass % and ppm do not.
  • ⚠️ Higher KH means lower solubility, not higher.
  • ⚠️ Gas solubility decreases as temperature rises (KH increases), because dissolving a gas is exothermic.
  • ⚠️ Chloroform + acetone shows negative deviation (H-bonding); ethanol + acetone shows positive deviation (H-bonds broken).
  • ⚠️ Positive deviation → minimum boiling azeotrope; negative deviation → maximum boiling azeotrope.
  • ⚠️ Relative lowering of vapour pressure equals the mole fraction of the solute, not of the solvent.
  • ⚠️ Osmotic pressure uses molarity; ΔTb and ΔTf use molality.
  • ⚠️ Association gives i < 1 and a higher observed molar mass; dissociation gives i > 1 and a lower observed molar mass.

Practice questions

Try each question, then check the answer key below. Get instant answers and explanations for more Solutions questions on TrackPrep.

Q1. 6.2 g of ethylene glycol (C2H6O2, molar mass 62 g mol–1) is dissolved in 250 g of water. Kf of water = 1.86 K kg mol–1. The depression in freezing point is:

  • (A) 0.186 K
  • (B) 0.372 K
  • (C) 0.744 K
  • (D) 1.488 K

👉 Solve this and more Solutions questions on TrackPrep

Q2. Assuming complete dissociation, the elevation in boiling point of a 0.01 m aqueous solution of K2SO4 is (Kb of water = 0.52 K kg mol–1):

  • (A) 0.0052 K
  • (B) 0.0104 K
  • (C) 0.0156 K
  • (D) 0.0208 K

👉 Solve this and more Solutions questions on TrackPrep

Q3. Liquids A and B form an ideal solution. p°A = 300 mm Hg and p°B = 800 mm Hg at a given temperature. For a liquid mixture with xA = 0.6, the mole fraction of B in the vapour phase is:

  • (A) 0.40
  • (B) 0.50
  • (C) 0.36
  • (D) 0.64

👉 Solve this and more Solutions questions on TrackPrep

Q4. Which pair forms a solution showing negative deviation from Raoult's law?

  • (A) Ethanol and acetone
  • (B) Chloroform and acetone
  • (C) Benzene and toluene
  • (D) Carbon disulphide and acetone

👉 Solve this and more Solutions questions on TrackPrep

Q5. The colligative property preferred for finding the molar mass of proteins is:

  • (A) Relative lowering of vapour pressure
  • (B) Elevation of boiling point
  • (C) Depression of freezing point
  • (D) Osmotic pressure

👉 Solve this and more Solutions questions on TrackPrep

Q6. How many of the following statements are correct?

  1. For an ideal solution, ΔmixH = 0 and ΔmixV = 0.
  2. The KH value of O2 in water increases with rise in temperature.
  3. Raoult's law is a special case of Henry's law in which KH equals p1°.
  4. Blood cells placed in a solution containing more than 0.9% (mass/volume) NaCl swell.
  • (A) One
  • (B) Two
  • (C) Three
  • (D) Four

👉 Solve this and more Solutions questions on TrackPrep

Q7. Match the example in Column I with the type of solution in Column II.

Column I Column II
A. Hydrogen in palladium i. Liquid in solid
B. Amalgam of mercury with sodium ii. Solid in gas
C. Camphor in nitrogen gas iii. Gas in solid
D. Copper dissolved in gold iv. Solid in solid
  • (A) A-iii, B-i, C-ii, D-iv
  • (B) A-i, B-iii, C-ii, D-iv
  • (C) A-iii, B-i, C-iv, D-ii
  • (D) A-ii, B-i, C-iii, D-iv

👉 Solve this and more Solutions questions on TrackPrep

Q8. Assertion (A): Molality of a solution does not change with temperature, while molarity does.

Reason (R): The volume of a solution depends on temperature, but mass does not.

  • (A) Both A and R are true, and R is the correct explanation of A.
  • (B) Both A and R are true, but R is not the correct explanation of A.
  • (C) A is true, but R is false.
  • (D) A is false, but R is true.

👉 Solve this and more Solutions questions on TrackPrep

Answer key

Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
C C D B D C A A

Got one wrong? Ask Jojo, the AI teacher, to explain it on a whiteboard: ask your doubt on TrackPrep

Practise Solutions on TrackPrep

  • ✅ Page-wise NCERT MCQs for Solutions, with explanations
  • ✅ Chapter-wise PYQs
  • ✅ NCERT line-by-line lecture by Anmol Sir
  • ✅ Jojo, the AI teacher, for any doubt, in Hindi, English or Hinglish

👉 Start practising Solutions on TrackPrep

Previous chapter: Hydrocarbons · Next chapter: Electrochemistry · All chapters: NEET Chemistry chapter-wise notes and questions

Practise for NEET on the TrackPrep app: get it on Google Play

Deep dives for this chapter

Frequently asked questions

Is Solutions important for NEET 2027?

Yes. Chemistry in NEET has 45 questions (180 marks), and Solutions is a numerical-heavy physical chemistry chapter. Colligative property formulas, Raoult's law and the van't Hoff factor are also reused in Electrochemistry and Chemical Kinetics problems.

Which topics of Solutions should I revise first?

Start with the four colligative properties and their formulas, then the van't Hoff factor, then Raoult's law with vapour composition. Finish with Henry's law applications and the positive and negative deviation examples.

How do I revise Solutions quickly before NEET?

Go through the formula table, memorise Kb = 0.52 and Kf = 1.86 for water, learn the deviation table with its NCERT examples, and solve one numerical each on ΔTf, ΔTb, π and vapour composition. End with the NEET traps list.

Where can I practise more Solutions questions?

On TrackPrep you get page-wise NCERT MCQs, chapter-wise PYQs and custom tests for Solutions. If a numerical confuses you, ask Jojo, the AI teacher, for a whiteboard explanation in Hindi, English or Hinglish.

What is a solution in chemistry?

A solution is a homogeneous mixture of two or more components, which means its composition and properties are uniform throughout. The component present in the largest quantity is the solvent, and it decides the physical state of the solution; the other components are the solutes. NCERT Class 12 mainly studies binary solutions, which have just two components.

What is the difference between a solution and a mixture?

A solution is a special kind of mixture: a homogeneous one, whose composition and properties are the same throughout. So every solution is a mixture, but a mixture is called a solution only when it is uniform, like glucose dissolved in water or a mixture of oxygen and nitrogen gases. Solutions can be gaseous, liquid or solid; copper dissolved in gold, for example, is a solid solution.

How is a solution formed when a solid dissolves in a liquid?

A solid dissolves when its particles go into the solvent, and it dissolves best in a solvent with similar intermolecular interactions (like dissolves like), so sugar and NaCl dissolve in water while naphthalene and anthracene dissolve in benzene. As dissolution goes on, some solute particles separate out again (crystallisation), and when both processes occur at the same rate a dynamic equilibrium is reached. The solution is then saturated, and the concentration of solute in it is its solubility at that temperature and pressure.

Last updated: 21 November 2026.

Tags:
  • chemistry
  • class 12
  • neet 2027
  • notes
  • solutions

← All articles