Electromagnetic Induction NEET Notes and Important Questions (Class 12 Physics)
Quick NEET revision of NCERT Class 12 Physics Chapter 6, Electromagnetic Induction. Crisp notes on Faraday and Henry's experiments, magnetic flux, Faraday's law, Lenz's law, motional emf, mutual and self-inductance, magnetic energy and the ac generator, a formula table, traps and 8 NEET-style MCQs.
By Anmol Sharma18 min read

Electromagnetic Induction: key highlights
| Particulars | Details |
|---|---|
| Class and chapter | NCERT Class 12 Physics, Chapter 6 |
| Unit | Electromagnetic Induction and Alternating Currents |
| Key topics | Faraday and Henry's experiments, magnetic flux, Faraday's law, Lenz's law and energy conservation, motional emf, mutual and self-inductance, ac generator |
| How NEET asks it | numericals on ε = −N dΦ/dt, Blv and ½BωR², inductance and ½LI²; Lenz's law direction questions; statement-based; assertion-reason |
| Revision time | 50-60 minutes for these notes |
In one line: An emf appears whenever the magnetic flux through a circuit changes, and its direction always opposes that change, which is simply energy conservation.
📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.
Table of contents
- Download the NCERT PDF
- Short notes for quick revision
- Important tables and comparisons
- Diagrams to revise
- NEET traps in this chapter
- Practice questions
- Answer key
- Practise Electromagnetic Induction on TrackPrep
- Frequently asked questions
Download the NCERT PDF
| Book | Chapter | Official PDF |
|---|---|---|
| NCERT Class 12 Physics | Chapter 6: Electromagnetic Induction | 📥 Download Electromagnetic Induction NCERT PDF (ncert.nic.in) |
Read the official NCERT chapter alongside these notes. Every note and question on this page is based on it.
Short notes for quick revision
Faraday and Henry's experiments
- Electromagnetic induction: generation of electric current by varying magnetic fields (Faraday in England, Henry in USA, around 1830).
- Experiment 6.1 (magnet and coil): galvanometer deflects only while the magnet moves; no deflection when it is stationary. Pulling away reverses the deflection; S-pole gives deflections opposite to the N-pole; faster motion gives a larger deflection. Moving the coil instead of the magnet gives the same effect: relative motion matters.
- Experiment 6.2 (two coils): a current-carrying coil C2 moved towards or away from C1 induces current in C1.
- Experiment 6.3 (stationary coils with a tapping key): momentary deflection when key K is pressed and again (opposite) when released; no deflection while it is held pressed. Deflection increases dramatically when an iron rod is inserted along the axis. So relative motion is not essential; a changing current is enough.
- Sensitive instruments near an electromagnet can be damaged by induced emfs when the electromagnet is switched on or off.
Magnetic flux
- ΦB = B · A = BA cos θ, θ = angle between B and the area vector A.
- For non-uniform fields: ΦB = Σ Bi · dAi.
- SI unit: weber (Wb) = T m². Magnetic flux is a scalar.
- Flux can be changed by changing B, the area/shape of the coil, or the angle θ (rotating the coil).
Faraday's law of induction
- Magnitude of induced emf = time rate of change of magnetic flux: ε = −dΦB/dt.
- For a closely wound coil of N turns: ε = −N dΦB/dt. More turns → more emf.
- If the circuit is closed, current I = ε/R.
- A steady field (like the earth's field during an experiment) gives flux but no emf.
- Example 6.2: square loop 10 cm side, R = 0.5 Ω, B = 0.10 T at 45° to the area vector, falls to zero in 0.70 s → ε = 1.0 mV, I = 2 mA.
- Example 6.3: coil r = 10 cm, 500 turns, R = 2 Ω, rotated 180° in 0.25 s in H = 3.0 × 10^-5 T → flux changes from +3π × 10^-7 to −3π × 10^-7 Wb; ε ≈ 3.8 × 10^-3 V, I ≈ 1.9 × 10^-3 A (average values).
Lenz's law and conservation of energy
- Lenz's law (1834): the polarity of the induced emf is such that it tends to produce a current which opposes the change in magnetic flux that produced it. The negative sign in Faraday's law shows this.
- N-pole approaching a coil → flux increases → induced current is counter-clockwise as seen from the magnet's side, so the coil face towards the magnet is a North pole (repulsion).
- N-pole receding → current clockwise, coil face is a South pole (attraction opposes the motion).
- If the induced current were the other way, the magnet would accelerate by itself: a perpetual-motion machine, which violates conservation of energy.
- The work done by the person pushing the magnet is dissipated as Joule heating by the induced current.
- In an open circuit, an emf is still induced across the open ends (no current flows).
- No current is induced while a loop is completely inside or completely outside a uniform field region.
- Example 6.5: a stationary loop in a field of strong permanent magnets → no current (no flux change). Changing electric flux does not induce current in a loop. A rectangular loop leaving a field at constant v gives a constant emf; a circular loop does not.
Motional emf
- Rod of length l moving with speed v perpendicular to a uniform B on a U-shaped conductor: ΦB = Blx, so ε = Blv (motional emf).
- Lorentz-force view: force on a charge = qvB along the rod; work W = qvBl; emf = W/q = Blv.
- For a stationary conductor in a changing B, the force F = q(E + v × B) = qE, so a time-varying magnetic field must produce an electric field. Such electric fields have properties different from those of static charges.
- Rotating rod (one end at the centre, length R, angular speed ω, B parallel to axis): ε = ½BωR².
- Example 6.6: R = 1 m, 50 rev/s, B = 1 T → ε = ½ × 1 × 2π × 50 × 1² = 157 V.
- Example 6.7: wheel with 10 spokes of 0.5 m, 120 rev/min (ω = 4π rad/s), HE = 0.4 G → ε = 6.28 × 10^-5 V. The number of spokes is immaterial: their emfs are in parallel.
Inductance
- Flux linkage NΦB ∝ I; the constant is inductance. It depends only on geometry and material (like capacitance).
- Inductance is a scalar; SI unit henry (H); dimensions [M L² T^-2 A^-2].
- Mutual inductance: N1Φ1 = M12 I2. For two long co-axial solenoids (inner radius r1, length l): M12 = M21 = µ0 n1 n2 π r1² l. With a core of relative permeability µr: M = µr µ0 n1 n2 π r1² l.
- M12 = M21 is a general result; it is useful when one of them is hard to calculate directly.
- M depends on the separation and relative orientation of the coils.
- Example 6.8: two concentric coaxial coils, r1 << r2 → M = µ0 π r1² / 2r2.
- Emf in coil 1 due to changing current in coil 2: ε1 = −M dI2/dt.
- Self-inductance: NΦB = LI; ε = −L dI/dt. The self-induced emf (back emf) opposes any increase or decrease of current.
- Long solenoid: L = µ0 n² A l; with a core: L = µr µ0 n² A l (soft iron raises L a lot).
- L plays the role of inertia (electromagnetic analogue of mass).
- Energy stored: W = ½ L I² (compare ½mv²).
- Magnetic energy density: uB = B²/2µ0; compare electric energy density uE = ½ ε0 E². Both ∝ (field)², and both are valid for any region of space.
- Two coils carrying current: ε1 = −L1 dI1/dt − M12 dI2/dt.
AC generator
- Converts mechanical energy into electrical energy; developed by Nicola Tesla.
- A coil (armature) rotates in a uniform B about an axis perpendicular to B; ends connect through slip rings and brushes.
- θ = ωt, ΦB = BA cos ωt, so ε = NBAω sin ωt = ε0 sin ωt, with ε0 = NBAω.
- ε is extreme at θ = 90° and 270° (flux is zero there but changes fastest); ε = 0 when the plane of the coil is perpendicular to B (flux maximum).
- ε = ε0 sin 2πνt; ν = frequency of rotation.
- Hydro-electric (falling water), thermal (steam from coal), nuclear generators. Modern generators: up to 500 MW. In most generators the coils are stationary and the electromagnets rotate.
- Mains frequency: 50 Hz in India, 60 Hz in the USA.
- Example 6.10: N = 100, A = 0.10 m², B = 0.01 T, ν = 0.5 Hz → ε0 = 0.314 V.
Formula table
| Formula | Meaning of symbols | When to use |
|---|---|---|
ΦB = BA cos θ |
θ between B and area vector; unit Wb = T m² | Flux through a plane loop |
ε = −N dΦB/dt |
N turns | Any induced emf (Faraday's law) |
I = ε/R |
R circuit resistance | Induced current in a closed loop |
ε = Blv |
l rod length, v speed perpendicular to B | Rod sliding on rails, falling wire |
ε = ½ B ω R² |
ω angular speed, R rod length | Rod or spoke rotating about one end |
N1Φ1 = M I2, ε1 = −M dI2/dt |
M mutual inductance (H) | Pair of coils |
M = µ0 n1 n2 π r1² l |
n turns per unit length, r1 inner radius | Co-axial long solenoids |
M = µ0 π r1² / 2r2 |
r1 << r2 | Concentric coaxial coils |
NΦ = LI, ε = −L dI/dt |
L self-inductance (H) | Back emf in one coil |
L = µr µ0 n² A l |
A cross-section, l length | Long solenoid |
U = ½ L I² |
Energy in J | Energy stored in an inductor |
uB = B²/2µ0 |
Energy per unit volume | Magnetic energy density |
ε = NBAω sin ωt, ε0 = NBAω |
ω = 2πν | AC generator |
Important tables and comparisons
Units and dimensions (NCERT table)
| Quantity | Symbol | Unit | Dimensions |
|---|---|---|---|
| Magnetic flux | ΦB | Wb (weber) | [M L² T^-2 A^-1] |
| EMF | ε | V (volt) | [M L² T^-3 A^-1] |
| Mutual inductance | M | H (henry) | [M L² T^-2 A^-2] |
| Self-inductance | L | H (henry) | [M L² T^-2 A^-2] |
Mutual vs self-inductance
| Feature | Mutual inductance | Self-inductance |
|---|---|---|
| Cause of emf | Changing current in a neighbouring coil | Changing current in the same coil |
| Relation | ε1 = −M dI2/dt | ε = −L dI/dt |
| Long solenoid result | µ0 n1 n2 π r1² l | µ0 n² A l |
| Depends on | Geometry, medium, separation, orientation | Geometry, medium |
Mechanics analogy
| Mechanics | Electromagnetism |
|---|---|
| Mass m (inertia) | Self-inductance L |
| Velocity v | Current I |
| Kinetic energy ½mv² | Magnetic energy ½LI² |
Ways to change flux
| Changed quantity | Example from NCERT |
|---|---|
| B | Moving a magnet or a current-carrying coil (Expts 6.1, 6.2); switching a current (Expt 6.3) |
| Area A | Sliding rod on rails; shrinking or stretching a coil |
| Angle θ | Rotating coil in an ac generator; coil rotated through 180° (Example 6.3) |
Diagrams to revise
- Fig. 6.1-6.3 (Faraday's experiments): deflection only during motion or switching; iron rod increases deflection.
- Fig. 6.4 and 6.5: area vector A, angle θ with B; flux as a sum over area elements.
- Fig. 6.6 (Lenz's law): approaching N-pole meets a North face (counter-clockwise current seen from the magnet); receding N-pole meets a South face.
- Fig. 6.10 (sliding rod PQ): flux Blx; ε = Blv; Lorentz force on charges along the rod.
- Fig. 6.11 (rotating rod in a ring): ε = ½BωR².
- Fig. 6.12 (co-axial solenoids): M12 = M21 = µ0 n1 n2 π r1² l.
- Fig. 6.13 and 6.14 (ac generator): armature, slip rings, brushes; sinusoidal emf, maxima at θ = 90° and 270°.
NEET traps in this chapter
- ⚠️ Emf depends on the rate of change of flux, not on the flux itself: a very strong but steady magnet induces no current.
- ⚠️ Lenz's law is a consequence of conservation of energy; the work done against the opposing force becomes Joule heat.
- ⚠️ An open circuit still has an induced emf, only no current.
- ⚠️ In the ac generator, emf is maximum when the flux is zero (coil plane parallel to B) and zero when the flux is maximum.
- ⚠️ For a wheel with many spokes, the emf is ½BωR², independent of the number of spokes (spokes are in parallel).
- ⚠️ Inductance depends on geometry and the medium, not on the current in the coil.
- ⚠️ A changing electric flux does not induce a current in a loop (NCERT Example 6.5).
- ⚠️ Rotating a coil by 180° changes flux by 2BA, not BA.
Practice questions
Try each question, then check the answer key below. Get instant answers and explanations for more Electromagnetic Induction questions on TrackPrep.
Q1. A coil of 200 turns and area 0.05 m² is held perpendicular to a uniform magnetic field of 0.4 T. The field falls steadily to zero in 0.1 s. The magnitude of the induced emf is
- (A) 4 V
- (B) 0.4 V
- (C) 40 V
- (D) 400 V
👉 Solve this and more Electromagnetic Induction questions on TrackPrep
Q2. A metal rod 0.5 m long rotates at 200 rad/s about an axis through one end, perpendicular to the rod, in a uniform magnetic field of 0.4 T parallel to the axis. The emf between the ends of the rod is
- (A) 20 V
- (B) 10 V
- (C) 5 V
- (D) 40 V
👉 Solve this and more Electromagnetic Induction questions on TrackPrep
Q3. The current in a coil falls steadily from 4 A to zero in 0.05 s, and an average emf of 80 V is induced. The self-inductance of the coil and the energy stored in it when it carries 4 A are
- (A) 1 H and 16 J
- (B) 0.25 H and 2 J
- (C) 4 H and 32 J
- (D) 1 H and 8 J
👉 Solve this and more Electromagnetic Induction questions on TrackPrep
Q4. The dimensions of self-inductance are
- (A) [M L² T^-2 A^-1]
- (B) [M L² T^-2 A^-2]
- (C) [M L² T^-3 A^-1]
- (D) [M L T^-2 A^-2]
👉 Solve this and more Electromagnetic Induction questions on TrackPrep
Q5. In a simple ac generator, the induced emf in the rotating coil is maximum when
- (A) the magnetic flux through the coil is maximum
- (B) the plane of the coil is perpendicular to the magnetic field
- (C) the angle between the area vector and the field is 90°
- (D) the angle between the area vector and the field is 0°
👉 Solve this and more Electromagnetic Induction questions on TrackPrep
Q6. How many of the following statements are correct?
- Magnetic flux is a vector quantity measured in weber.
- Lenz's law is a consequence of the law of conservation of energy.
- An emf is induced across the ends of an open circuit when the flux through it changes.
- Mutual inductance of two coils depends on their separation and relative orientation.
- Self-inductance of a solenoid increases if a soft iron core is inserted.
- (A) Two
- (B) Three
- (C) Four
- (D) Five
👉 Solve this and more Electromagnetic Induction questions on TrackPrep
Q7. Match List I with List II.
| List I | List II |
|---|---|
| A. Self-inductance of a long solenoid | i. ½ L I² |
| B. Energy stored in an inductor | ii. B²/2µ0 |
| C. Magnetic energy density | iii. µ0 n² A l |
| D. Peak emf of an ac generator | iv. NBAω |
- (A) A-iii, B-ii, C-i, D-iv
- (B) A-iv, B-i, C-ii, D-iii
- (C) A-iii, B-i, C-ii, D-iv
- (D) A-i, B-iii, C-iv, D-ii
👉 Solve this and more Electromagnetic Induction questions on TrackPrep
Q8. Assertion (A): The emf between the axle and the rim of a rotating metal wheel in a magnetic field does not depend on the number of spokes. Reason (R): The emfs across the spokes are in parallel.
- (A) Both A and R are true and R is the correct explanation of A.
- (B) Both A and R are true but R is not the correct explanation of A.
- (C) A is true but R is false.
- (D) A is false but R is true.
👉 Solve this and more Electromagnetic Induction questions on TrackPrep
Answer key
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 |
|---|---|---|---|---|---|---|---|
| C | B | D | B | C | C | C | A |
- Q1: ε = N BA/Δt = 200 × 0.4 × 0.05 / 0.1 = 40 V.
- Q2: ε = ½BωR² = ½ × 0.4 × 200 × (0.5)² = 10 V.
- Q3: L = ε Δt / ΔI = 80 × 0.05 / 4 = 1 H; U = ½ × 1 × 4² = 8 J.
- Q4: L = flux / current, so [M L² T^-2 A^-1]/[A] = [M L² T^-2 A^-2].
- Q5: ε = NBAω sin θ is maximum at θ = 90°, when the flux is zero but changing fastest.
- Q6: Statements 2, 3, 4 and 5 are correct; magnetic flux is a scalar.
- Q7: µ0 n² A l, ½LI², B²/2µ0 and NBAω.
- Q8: Each spoke has the same emf ½BωR², and parallel emfs do not add (NCERT Example 6.7).
Got one wrong? Ask Jojo, the AI teacher, to explain it on a whiteboard: ask your doubt on TrackPrep
Practise Electromagnetic Induction on TrackPrep
- ✅ Page-wise NCERT MCQs for Electromagnetic Induction, with explanations
- ✅ Chapter-wise PYQs
- ✅ NCERT line-by-line lecture by Anmol Sir
- ✅ Jojo, the AI teacher, for any doubt, in Hindi, English or Hinglish
👉 Start practising Electromagnetic Induction on TrackPrep
Previous chapter: Magnetism and Matter · Next chapter: Alternating Current · All chapters: NEET Physics chapter-wise notes and questions
Frequently asked questions
Is Electromagnetic Induction important for NEET 2027?
Yes. NEET Physics has 45 questions (180 marks), and this chapter gives direct formula questions on Faraday's law, motional emf, inductance and the ac generator. It is also the base for the next chapter, Alternating Current.
Which topics of Electromagnetic Induction should I revise first?
Start with flux and Faraday's law (ε = −N dΦ/dt), then Lenz's law directions. Next revise motional emf (Blv and ½BωR²), then self and mutual inductance with ½LI², and finish with the ac generator equation.
How do I revise Electromagnetic Induction quickly before NEET?
Revise the formula table and the units-and-dimensions table, then solve NCERT Examples 6.2, 6.3, 6.6, 6.7 and 6.10. Go through the traps list once, especially the ac generator maximum-emf position.
Where can I practise more Electromagnetic Induction questions?
TrackPrep has page-wise NCERT MCQs and chapter-wise PYQs for this chapter, plus NTA-style CBT mock tests. Stuck on a Lenz's law direction? Send a photo to Jojo, the AI teacher, for a whiteboard explanation.
What is electromagnetic induction?
Electromagnetic induction is the generation of an electric current (or emf) in a circuit by a changing magnetic field, discovered by Faraday in England and Henry in the USA around 1830. Faraday's law gives the induced emf as the rate of change of magnetic flux, ε = −N dΦB/dt for a coil of N turns. A steady magnetic field produces flux but no emf; only a change in flux does.
How does electromagnetic induction occur?
An emf is induced whenever the magnetic flux ΦB = BA cos θ linked with a coil changes, which can happen by changing B, the area of the coil or the angle θ. In Faraday's experiments the galvanometer deflected only while a magnet moved relative to the coil, or at the moment a current in a nearby coil was switched on or off, and never while things stayed steady. By Lenz's law the induced current flows in the direction that opposes the change in flux that produced it.
How does electromagnetic induction work in an ac generator?
An ac generator turns mechanical energy into electrical energy by rotating a coil (armature) in a uniform magnetic field, so the angle between the field and the coil's area vector keeps changing. The flux becomes ΦB = BA cos ωt, which induces an emf ε = NBAω sin ωt, with a peak value ε₀ = NBAω. The emf is largest when the flux through the coil is zero (θ = 90° and 270°), because the flux is changing fastest at those positions.
What is the difference between mutual induction and self-induction?
Mutual induction is the emf induced in one coil by a changing current in a nearby coil, ε₁ = −M dI₂/dt, while self-induction is the emf induced in a coil by a change in its own current, ε = −L dI/dt. Both mutual inductance M and self-inductance L are measured in henry (H). The self-induced emf is called back emf because it opposes any increase or decrease of current, so L acts like the electrical analogue of mass (inertia).
Last updated: 21 November 2026.
- physics
- class 12
- neet 2027
- notes
- electromagnetic induction
