Skip to content
TrackPrep

Galvanic Cell vs Electrolytic Cell: Difference, Electrode Signs and NEET Traps

A galvanic cell turns a spontaneous reaction into electricity; an electrolytic cell uses electricity to drive a non-spontaneous one. This NCERT-based guide compares them in tables, shows the Daniell cell switch at 1.1 V, covers electrode signs and Faraday's laws, and ends with 5 MCQs.

By Anmol Sharma8 min read

Cartoon student at a laptop: Galvanic vs Electrolytic cell for NEET 2027

Galvanic vs electrolytic cell: key highlights

Particulars Galvanic (voltaic) cell Electrolytic cell
NCERT source Class 12 Chemistry, Unit 2 (Electrochemistry) Same unit
Energy change Chemical energy → electrical energy Electrical energy → chemical change
Reaction Spontaneous redox reaction Non-spontaneous reaction
Anode sign Negative Positive
Cathode sign Positive Negative
Example Daniell cell (Zn–Cu), 1.1 V Electrolytic refining of copper

In one line: A galvanic cell converts the Gibbs energy of a spontaneous redox reaction into electrical work, while an electrolytic cell uses an external voltage to drive a non-spontaneous reaction; oxidation is at the anode and reduction at the cathode in both, but the electrode signs are reversed.

📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.

Table of contents

One cell, two jobs: the Daniell cell experiment

The Daniell cell runs the reaction Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s) and gives 1.1 V when both ion concentrations are 1 mol dm^–3. NCERT shows what happens when you apply an opposing external voltage (E_ext):

External voltage Electron flow Chemical change The cell behaves as
E_ext < 1.1 V Zn rod → Cu rod (current Cu → Zn) Zn dissolves at anode, Cu deposits at cathode Galvanic cell
E_ext = 1.1 V No flow, no current No reaction Balanced
E_ext > 1.1 V Cu → Zn (current Zn → Cu) Zn deposits on zinc electrode, Cu dissolves at copper electrode Electrolytic cell

This single figure (NCERT Fig. 2.2) is the clearest way to remember the difference: the same cell becomes electrolytic once the outside voltage beats its own emf.

Difference between galvanic and electrolytic cell: full table

Basis Galvanic cell Electrolytic cell
Definition Converts chemical energy of a spontaneous redox reaction into electrical energy Uses electrical energy to carry out a non-spontaneous chemical reaction
Gibbs energy ΔrG is negative; ΔrG = –nFE(cell) Energy must be supplied from outside
Source of emf The redox reaction itself External DC source
Oxidation occurs at Anode Anode
Reduction occurs at Cathode Cathode
Anode charge Negative (w.r.t. solution) Positive (joined to + terminal)
Cathode charge Positive Negative
Two half-cells and salt bridge Usually two half-cells joined by a salt bridge (not needed if both electrodes dip in the same electrolyte) Often a single vessel, e.g. two copper strips in CuSO4 solution
Uses Batteries (dry cell, mercury cell, lead storage battery in use), fuel cells Refining of copper; production of Na, Mg (from fused chlorides) and Al (from Al2O3 with cryolite)

Cell notation (galvanic cells only)

  • Anode on the left, cathode on the right.
  • Single vertical line between metal and its solution; double vertical line for the salt bridge.
  • E(cell) = E(right) – E(left). Example: Cu(s)|Cu²⁺(aq)||Ag⁺(aq)|Ag(s).
  • For the Daniell cell: E°(cell) = 0.34 V – (–0.76 V) = 1.10 V.

Electrode signs: the biggest confusion

Remember the rule that never changes: oxidation at the anode, reduction at the cathode ("An Ox, Red Cat").

What changes is the sign:

  • Galvanic: the anode releases electrons into the wire, so it is the negative electrode. Electrons flow from the negative to the positive electrode; current flows the opposite way.
  • Electrolytic: the external battery pulls electrons out of the anode, so the anode is joined to the positive terminal. NCERT calls the cathode the "negatively charged" electrode where Cu²⁺ ions discharge.
Electrode Process Galvanic sign Electrolytic sign
Anode Oxidation – +
Cathode Reduction + –

Batteries switch roles. A secondary cell like the lead storage battery acts as a galvanic cell while it is used, and on charging the reaction is reversed by passing current, the way an electrolytic cell works.

Electrolysis numbers: Faraday's laws

  • First law: the amount of chemical reaction at an electrode is proportional to the quantity of electricity passed.
  • Second law: for the same quantity of electricity, the amounts of different substances liberated are proportional to their chemical equivalent weights (atomic mass ÷ electrons needed to reduce the cation).
  • Q = I × t (coulombs = amperes × seconds).
  • 1 F = 96487 C mol^–1 (≈ 96500 for quick work) = charge on one mole of electrons.
Ion reduced Electrons per ion Charge for 1 mol of metal
Ag⁺ → Ag 1 1 F
Mg²⁺ → Mg 2 2 F
Al³⁺ → Al 3 3 F

NCERT Example 2.10: CuSO4 electrolysed for 10 min at 1.5 A. Q = 1.5 × 600 = 900 C. Mass of Cu = (63 × 900)/(2 × 96487) = 0.2938 g.

Products depend on the electrolyte: molten NaCl gives Na and Cl2, but aqueous NaCl gives NaOH, Cl2 and H2, because water is reduced at the cathode in preference to Na⁺, and Cl2 forms at the anode due to the overpotential of oxygen.

NEET traps to remember

  • Anode is not always negative. It is negative in a galvanic cell and positive in an electrolytic cell.
  • Oxidation is always at the anode, in both cells.
  • The Daniell cell stops at E_ext = 1.1 V and reverses above it.
  • E(cell) is intensive, ΔrG is extensive. Doubling the equation doubles ΔrG, not E.
  • Aqueous NaCl does not give sodium metal.

Practice MCQs

1. In an electrolytic cell, the anode is: (a) Negative, and reduction occurs (b) Positive, and oxidation occurs (c) Negative, and oxidation occurs (d) Positive, and reduction occurs

👉 Solve this and more Electrochemistry questions on TrackPrep

2. An external opposing voltage of 1.5 V is applied to a standard Daniell cell. Which happens? (a) Zn dissolves and Cu deposits (b) No reaction occurs (c) Zn deposits and Cu dissolves (d) Current flows from Cu to Zn

👉 Solve this and more Electrochemistry questions on TrackPrep

3. How many faradays are needed to deposit 1 mol of Al from molten Al2O3? (a) 1 F (b) 2 F (c) 3 F (d) 6 F

👉 Solve this and more Electrochemistry questions on TrackPrep

4. Electrolysis of aqueous NaCl gives: (a) Na and Cl2 (b) NaOH, Cl2 and H2 (c) Na and O2 (d) NaOH, O2 and H2

👉 Solve this and more Electrochemistry questions on TrackPrep

5. A current of 1.5 A is passed through CuSO4 solution for 10 minutes. The charge passed is: (a) 15 C (b) 90 C (c) 900 C (d) 9000 C

👉 Solve this and more Electrochemistry questions on TrackPrep

Answer key

Q Answer Why
1 (b) Oxidation is always at the anode; in electrolysis it is joined to the positive terminal
2 (c) Above 1.1 V the cell works as an electrolytic cell and the reaction reverses
3 (c) Al³⁺ + 3e⁻ → Al needs 3 mol of electrons
4 (b) Water is reduced at the cathode; overpotential of oxygen gives Cl2 at the anode
5 (c) Q = It = 1.5 A × 600 s = 900 C

Practise on TrackPrep

  • ✅ Page-wise NCERT MCQs for Electrochemistry, including every value in the E° table
  • ✅ Chapter-wise and year-wise PYQs on cells, Faraday's laws and electrolysis products
  • ✅ Jojo, the AI teacher: send a photo of any cell diagram and get it explained on a whiteboard
  • ✅ Custom tests and NTA-style CBT mocks to mix Electrochemistry with other chapters

👉 Start practising free on TrackPrep

📲 Download the TrackPrep app for more practice: Get TrackPrep on Google Play

Related: Electrochemistry: NEET notes and questions · Nernst equation with solved numericals · NEET Chemistry chapter-wise notes and questions

Practise for NEET on the TrackPrep app: get it on Google Play

Frequently asked questions

What is the main difference between a galvanic and an electrolytic cell?

A galvanic cell produces electricity from a spontaneous redox reaction. An electrolytic cell consumes electricity from an outside source to make a non-spontaneous reaction happen.

Is the anode positive or negative?

It depends on the cell. The anode is negative in a galvanic cell and positive in an electrolytic cell, but oxidation takes place at the anode in both.

Is a Daniell cell galvanic or electrolytic?

It is a galvanic cell giving 1.1 V under standard conditions. If an external opposing voltage greater than 1.1 V is applied, it starts working as an electrolytic cell.

Is an electrochemical cell the same as a galvanic cell?

A galvanic (voltaic) cell is a type of electrochemical cell that converts chemical energy into electrical energy. Electrolytic cells are the other type covered in NCERT.

Last updated: 21 November 2026.

Tags:
  • chapter notes
  • difference between
  • neet 2027
  • chemistry

← All articles