Skip to content
TrackPrep

Nernst Equation for NEET: Formula, Kc and ΔG Links, and Solved Numericals

The Nernst equation tells you the electrode or cell potential when concentrations are not 1 M. This NCERT-based guide gives every form of the equation, the 0.059 V shortcut at 298 K, links to Kc and Gibbs energy, six solved numericals and 5 NEET MCQs.

By Anmol Sharma8 min read

Cartoon student at a laptop: Nernst equation solved numericals for NEET 2027

Nernst equation: key highlights

Particulars Details
NCERT source Class 12 Chemistry, Unit 2 (Electrochemistry), Section 2.3
Electrode form E = E° – (RT/nF) ln (1/[Mⁿ⁺]) for Mⁿ⁺ + ne⁻ → M(s)
Cell form E(cell) = E°(cell) – (RT/nF) ln Q
Shortcut at 298 K E(cell) = E°(cell) – (0.059/n) log Q
At equilibrium E(cell) = 0 and E°(cell) = (2.303RT/nF) log Kc
Gibbs energy link ΔrG° = –nFE°(cell)

In one line: The Nernst equation corrects the standard potential for real concentrations: at 298 K, E(cell) = E°(cell) – (0.059 V/n) log Q, and at equilibrium E(cell) becomes zero, which gives E°(cell) = (0.059 V/n) log Kc.

📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.

Table of contents

Why we need the Nernst equation

  • Standard electrode potentials (E°) are measured when every species is at unit concentration (1 M, gases at 1 bar).
  • Real cells rarely have 1 M solutions, and as a cell runs, concentrations keep changing.
  • Nernst showed how the electrode potential depends on concentration. That is why a Daniell cell's voltage falls as it is used: [Zn²⁺] rises, [Cu²⁺] falls, and finally the voltmeter reads zero at equilibrium.

All forms of the Nernst equation

Symbols: R = 8.314 J K^–1 mol^–1, F = 96487 C mol^–1, T in kelvin, n = electrons transferred. The concentration of a pure solid (like M) is taken as 1.

Use Equation Note
Single electrode Mⁿ⁺/M E = E° – (RT/nF) ln (1/[Mⁿ⁺]) Higher [Mⁿ⁺] raises E
Same, at 298 K E = E° – (0.059/n) log (1/[Mⁿ⁺]) 2.303RT/F ≈ 0.059 V at 298 K
Daniell cell E(cell) = E°(cell) – (0.059/2) log ([Zn²⁺]/[Cu²⁺]) E rises with more Cu²⁺ and less Zn²⁺
General cell aA + bB → cC + dD E(cell) = E°(cell) – (RT/nF) ln ([C]^c[D]^d / [A]^a[B]^b) Q is the reaction quotient

Writing Q correctly

  1. Write the balanced cell reaction (anode on the left, cathode on the right).
  2. Put products over reactants, each raised to its coefficient.
  3. Leave out solids. Use the same n for both electrodes (NCERT stresses this).

For Ni(s) + 2Ag⁺(aq) → Ni²⁺(aq) + 2Ag(s): n = 2 and Q = [Ni²⁺]/[Ag⁺]².

Solved numericals

1. NCERT Example: magnesium–silver cell

Mg(s) + 2Ag⁺(0.0001 M) → Mg²⁺(0.130 M) + 2Ag(s); E°(cell) = 3.17 V.

  • Cell: Mg | Mg²⁺(0.130 M) || Ag⁺(0.0001 M) | Ag
  • Q = 0.130/(0.0001)² = 1.3 × 10⁷, log Q = 7.11
  • E(cell) = 3.17 – (0.059/2)(7.11) = 3.17 – 0.21 = 2.96 V

2. NCERT Intext 2.5: nickel–silver cell

Ni(s) + 2Ag⁺(0.002 M) → Ni²⁺(0.160 M) + 2Ag(s); E°(cell) = 1.05 V.

  • Q = 0.160/(0.002)² = 4 × 10⁴, log Q = 4.60
  • E(cell) = 1.05 – (0.0295)(4.60) = 1.05 – 0.14 = 0.91 V

3. NCERT Intext 2.4: hydrogen electrode at pH 10

H⁺ + e⁻ → ½H₂(g), E° = 0, n = 1, H₂ at 1 bar.

  • E = 0 – 0.059 log (1/[H⁺]) = –0.059 × pH
  • E = –0.059 × 10 = –0.59 V

4. Copper electrode in 0.01 M Cu²⁺

Cu²⁺ + 2e⁻ → Cu(s), E° = 0.34 V (NCERT Table 2.1).

  • E = 0.34 – (0.059/2) log (1/0.01) = 0.34 – 0.0295 × 2 = 0.28 V
  • Lower [Cu²⁺] → lower reduction potential, as expected.

5. Daniell cell with unequal concentrations

[Zn²⁺] = 0.1 M, [Cu²⁺] = 1 M, E°(cell) = 0.34 – (–0.76) = 1.10 V.

  • E(cell) = 1.10 – (0.059/2) log (0.1/1) = 1.10 + 0.03 = 1.13 V

Quick summary of the numericals

No. System n log Q E (V)
1 Mg–Ag cell 2 7.11 2.96
2 Ni–Ag cell 2 4.60 0.91
3 H⁺/H₂ at pH 10 1 10 –0.59
4 Cu²⁺(0.01 M)/Cu 2 2 0.28
5 Daniell, [Zn²⁺] = 0.1 M 2 –1 1.13

Kc and Gibbs energy from E°

Equilibrium constant

At equilibrium, E(cell) = 0 and Q = Kc, so: E°(cell) = (2.303RT/nF) log Kc, or at 298 K, log Kc = n E°(cell)/0.059.

NCERT Daniell cell: log Kc = (2 × 1.1)/0.059 = 37.29, so Kc ≈ 2 × 10³⁷ at 298 K. A huge Kc means the reaction goes almost to completion. This route lets us find equilibrium constants that are hard to measure directly.

Gibbs energy

ΔrG° = –nFE°(cell). For the Daniell cell: ΔrG° = –2 × 96487 × 1.1 J mol^–1 ≈ –212.27 kJ mol^–1.

Quantity Type Effect of doubling the equation
E(cell) Intensive No change
ΔrG Extensive Doubles (n becomes 4)
Sign of E°(cell) ΔrG° Kc Reaction
Positive Negative > 1 Spontaneous in the forward direction
Zero Zero = 1 At equilibrium
Negative Positive < 1 Non-spontaneous as written

NEET traps to remember

  • Solids are left out of Q. Their concentration is taken as 1.
  • n must be the same for both electrodes; do not multiply E° by stoichiometric coefficients.
  • 0.059 V works only at 298 K. At other temperatures use 2.303RT/nF.
  • Sign check: a higher product concentration lowers E(cell).
  • At equilibrium, E(cell) = 0, not E°(cell).
  • Hydrogen electrode: E = –0.059 pH, so it becomes more negative as pH rises.

Practice MCQs

1. For a Daniell cell with [Zn²⁺] = 1 M and [Cu²⁺] = 0.01 M at 298 K (E°cell = 1.10 V), E(cell) is about: (a) 1.16 V (b) 1.10 V (c) 1.04 V (d) 0.98 V

👉 Solve this and more Electrochemistry questions on TrackPrep

2. The potential of a hydrogen electrode in a solution of pH 4 (H₂ at 1 bar, 298 K) is: (a) +0.236 V (b) –0.236 V (c) –0.059 V (d) 0 V

👉 Solve this and more Electrochemistry questions on TrackPrep

3. When a galvanic cell reaches equilibrium: (a) E°(cell) = 0 (b) E(cell) = 0 (c) Kc = 0 (d) ΔrG° = 0

👉 Solve this and more Electrochemistry questions on TrackPrep

4. For a cell reaction with n = 1 and E°(cell) = 0.59 V at 298 K, Kc is: (a) 10 (b) 10⁵ (c) 10¹⁰ (d) 10²⁰

👉 Solve this and more Electrochemistry questions on TrackPrep

5. If the Daniell cell equation is written as 2Zn + 2Cu²⁺ → 2Zn²⁺ + 2Cu, then: (a) E(cell) doubles and ΔrG doubles (b) E(cell) is unchanged and ΔrG doubles (c) Both are unchanged (d) E(cell) doubles and ΔrG is unchanged

👉 Solve this and more Electrochemistry questions on TrackPrep

Answer key

Q Answer Why
1 (c) 1.10 – 0.0295 log (1/0.01) = 1.10 – 0.059 = 1.04 V
2 (b) E = –0.059 × 4 = –0.236 V
3 (b) The cell voltage falls to zero; E° stays fixed
4 (c) log Kc = 1 × 0.59/0.059 = 10
5 (b) E is intensive; ΔrG = –4FE(cell) is extensive (NCERT)

Practise on TrackPrep

  • ✅ Page-wise NCERT MCQs for Electrochemistry, including every Nernst equation example
  • ✅ Chapter-wise and year-wise PYQs on E(cell), Kc and ΔG numericals
  • ✅ Jojo, the AI teacher: send a photo of a numerical and see each log step worked on a whiteboard
  • ✅ My Study Plan and custom tests to drill Physical Chemistry numericals daily

👉 Start practising free on TrackPrep

📲 Download the TrackPrep app for more practice: Get TrackPrep on Google Play

Related: Electrochemistry: NEET notes and questions · Galvanic vs electrolytic cell · NEET Chemistry chapter-wise notes and questions

Practise for NEET on the TrackPrep app: get it on Google Play

Frequently asked questions

What is the Nernst equation used for?

It gives the potential of an electrode or a cell when the concentrations are not 1 M. It also links the standard cell potential to the equilibrium constant and Gibbs energy.

What is 0.059 in the Nernst equation?

It is the value of 2.303RT/F in volts at 298 K. It lets you use log to base 10 instead of the natural log, but only at 298 K.

Why is E(cell) zero at equilibrium?

At equilibrium there is no net reaction, so no electrons flow and the voltmeter reads zero. Putting E(cell) = 0 and Q = Kc in the Nernst equation gives the relation between E° and Kc.

Does the Nernst equation include solids?

No. The concentration of a pure solid, such as the metal electrode, is taken as unity, so it does not appear in Q.

Last updated: 21 November 2026.

Tags:
  • chapter notes
  • topic
  • neet 2027
  • chemistry

← All articles