Kirchhoff's Laws and Wheatstone Bridge for NEET: Rules, Balance Condition and Solved Numericals
Kirchhoff's junction rule and loop rule solve any circuit that series and parallel formulas cannot. This NCERT Class 12 guide explains both rules, the sign convention, the Wheatstone bridge balance condition, five solved numericals (including NCERT Examples 3.6 and 3.7) and 5 NEET MCQs.
By Anmol Sharma10 min read

Kirchhoff's laws and Wheatstone bridge: key highlights
| Particulars | Details |
|---|---|
| NCERT source | Class 12 Physics, Chapter 3 (Current Electricity), Sections 3.12 and 3.13 |
| Junction rule | Sum of currents entering a junction = sum of currents leaving it |
| Junction rule is based on | Conservation of charge (no charge piles up at a junction) |
| Loop rule | Algebraic sum of potential changes around any closed loop = 0 |
| Wheatstone bridge balance | R2/R1 = R4/R3, so no current flows through the galvanometer |
| Practical use | Finding an unknown resistance (the meter bridge uses this principle) |
In one line: Kirchhoff's junction rule (charge conservation) says current in equals current out at every junction, the loop rule says potential changes around any closed loop add up to zero, and applying both to a Wheatstone bridge gives its balance condition R2/R1 = R4/R3, when the galvanometer shows zero current.
📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.
Table of contents
- Kirchhoff's rules explained
- Sign convention for the loop rule
- Wheatstone bridge and its balance condition
- Solved numericals
- NEET traps to remember
- Practice MCQs
- Answer key
- Practise on TrackPrep
- Frequently asked questions
Kirchhoff's rules explained
Series and parallel formulas cannot handle every circuit. When cells and resistors are joined in a network, NCERT uses two rules given by Gustav Robert Kirchhoff.
| Rule | Statement (NCERT) | Why it is true |
|---|---|---|
| Junction rule (first rule) | At any junction, the sum of currents entering = the sum of currents leaving | With steady currents, no charge accumulates at a junction or at any point in a line |
| Loop rule (second rule) | The algebraic sum of changes in potential around any closed loop of resistors and cells is zero | Potential depends only on the location of a point, so going round a loop and returning to the start gives zero total change |
How to use them (NCERT method):
- Label the current in each resistor with a symbol and an arrow.
- Use the junction rule first at every junction, so the number of unknown currents is as small as possible.
- Apply the loop rule to as many independent closed loops as there are unknowns.
- Solve. If a current comes out negative, it actually flows opposite to your arrow. You do not need to redraw the circuit.
NCERT's Points to Ponder adds: bending or reorienting a wire does not change the junction rule, because it rests only on charge conservation.
Sign convention for the loop rule
Pick one direction to go round the loop and keep it.
| While going round the loop you cross... | Change in potential |
|---|---|
| A resistor R in the same direction as its current I | –IR (drop) |
| A resistor R against its current I | +IR (rise) |
| A cell from – terminal to + terminal | +ε |
| A cell from + terminal to – terminal | –ε |
NCERT also reminds you of the cell itself: if current I flows through a cell from the negative to the positive terminal, the terminal voltage is V = ε – Ir; if it flows from positive to negative (the cell is being charged), V = ε + Ir.
Wheatstone bridge and its balance condition
The Wheatstone bridge (NCERT Fig. 3.18) has four resistors R1, R2, R3 and R4.
- A cell is connected across one pair of opposite corners, A and C: the battery arm.
- A galvanometer G is connected across the other pair, B and D: the galvanometer arm.
- R1 and R3 carry current I1 along one path from A to C; R2 and R4 carry current I2 along the other path.
Balanced bridge (Ig = 0):
- Junction rule at B and D gives I1 = I3 and I2 = I4.
- Loop ADBA gives –I1R1 + I2R2 = 0, and loop CBDC gives I2R4 – I1R3 = 0.
- Dividing: R2/R1 = R4/R3, which is the same as R1R4 = R2R3.
| Situation | What happens | What to do in a numerical |
|---|---|---|
| Bridge balanced | No current in the galvanometer, B and D are at the same potential | Remove the galvanometer arm and combine the two paths in parallel |
| Bridge not balanced | Current flows through G | Use Kirchhoff's rules (as in NCERT Example 3.7) |
| Unknown resistance in arm 4 | Vary R3 until null deflection | R4 = R3 (R2/R1) |
Solved numericals
1. Finding an unknown resistance
A Wheatstone bridge is balanced with R1 = 10 Ω, R2 = 20 Ω and R3 = 15 Ω. Find R4.
- R4 = R3 × R2/R1 = 15 × 20/10 = 30 Ω
2. Equivalent resistance of a balanced bridge
R1 = 2 Ω and R3 = 4 Ω on one path, R2 = 3 Ω and R4 = 6 Ω on the other, galvanometer resistance 5 Ω.
- Check: R2/R1 = 3/2 = 1.5 and R4/R3 = 6/4 = 1.5, so the bridge is balanced.
- The 5 Ω galvanometer carries no current, so ignore it.
- Paths: (2 + 4) = 6 Ω and (3 + 6) = 9 Ω in parallel: R = (6 × 9)/(6 + 9) = 3.6 Ω
3. Two cells, two loops (a negative current)
A 12 V cell in series with 2 Ω, and a 4 V cell in series with 2 Ω, are both connected (positive terminals to the top junction) across a 3 Ω resistor. Cells are ideal.
- Junction: I3 = I1 + I2 (I1 and I2 upward through the cells, I3 down through 3 Ω)
- Loop 1: 12 – 2I1 – 3I3 = 0
- Loop 2: 4 – 2I2 – 3I3 = 0
- Solving: I1 = 3 A, I2 = –1 A, I3 = 2 A
- I2 is negative, so 1 A actually flows into the positive terminal of the 4 V cell: it is being charged.
4. NCERT Example 3.6: network with three unknowns
Using the junction rule first leaves three unknowns. The three loop equations NCERT writes are:
- 7I1 – 6I2 – 2I3 = 10
- I1 + 6I2 + 2I3 = 10
- 2I1 – 4I2 – 4I3 = –5
Solving: I1 = 2.5 A, I2 = 5/8 A, I3 = 15/8 A, so the branch currents are AB = 5/8 A, CA = 2.5 A, BC = 2.5 A, AD = 15/8 A, DEB = 15/8 A and CD = 0 A.
5. NCERT Example 3.7: unbalanced Wheatstone bridge
AB = 100 Ω, BC = 10 Ω, CD = 5 Ω, DA = 60 Ω, galvanometer 15 Ω across BD, 10 V across AC.
- Check balance: 100/10 = 10 but 60/5 = 12, so the bridge is not balanced.
- NCERT applies the loop rule to meshes BADB, BCDB and ADCEA and gets I2 = 31.5 Ig and 13I2 + Ig = 2.
- So 410.5 Ig = 2, giving Ig ≈ 4.87 mA.
NEET traps to remember
- The junction rule is charge conservation. Do not mix it up with the loop rule.
- Keep one direction round a loop; changing direction midway gives wrong signs.
- A negative answer is not an error. It only means the current flows opposite to your arrow.
- In a balanced bridge, the galvanometer resistance does not matter. Any resistor across B and D carries zero current.
- Check balance first. If the ratios differ, you must use Kirchhoff's rules.
Practice MCQs
1. Kirchhoff's junction rule is a consequence of the conservation of: (a) energy (b) charge (c) momentum (d) mass
👉 Solve this and more Current Electricity questions on TrackPrep
2. Four wires meet at a junction. 3 A and 2 A flow in through two of them and 4 A flows out through the third. The current in the fourth wire is: (a) 1 A into the junction (b) 1 A out of the junction (c) 9 A out of the junction (d) zero
👉 Solve this and more Current Electricity questions on TrackPrep
3. A Wheatstone bridge is balanced with R1 = 10 Ω, R2 = 20 Ω and R3 = 15 Ω (balance condition R2/R1 = R4/R3). R4 is: (a) 7.5 Ω (b) 13.3 Ω (c) 30 Ω (d) 45 Ω
👉 Solve this and more Current Electricity questions on TrackPrep
4. A balanced bridge has paths of 2 Ω + 4 Ω and 3 Ω + 6 Ω, with a 5 Ω galvanometer. An ideal 12 V battery is connected across it. The current drawn is about: (a) 2.0 A (b) 2.4 A (c) 3.3 A (d) 5.0 A
👉 Solve this and more Current Electricity questions on TrackPrep
5. While solving a circuit by Kirchhoff's rules, a current comes out as –1 A. This means: (a) the circuit was solved wrongly (b) the current is zero (c) 1 A flows opposite to the assumed direction (d) the loop rule does not apply
👉 Solve this and more Current Electricity questions on TrackPrep
Answer key
| Q | Answer | Why |
|---|---|---|
| 1 | (b) | No charge accumulates at a junction with steady currents (NCERT) |
| 2 | (b) | In = 3 + 2 = 5 A; out = 4 A + x, so x = 1 A out |
| 3 | (c) | R4 = 15 × 20/10 = 30 Ω |
| 4 | (c) | Balanced: 6 Ω ∥ 9 Ω = 3.6 Ω; 12/3.6 ≈ 3.3 A |
| 5 | (c) | NCERT: a negative current flows opposite to the arrow |
Practise on TrackPrep
- ✅ Page-wise NCERT MCQs for Current Electricity, built on every Kirchhoff and Wheatstone bridge example
- ✅ Chapter-wise and year-wise PYQs on circuit numericals
- ✅ Jojo, the AI teacher: send a photo of a circuit and see every loop equation solved on a whiteboard
- ✅ Mistake Book and custom tests to drill the sign errors you keep making
👉 Start practising free on TrackPrep
📲 Download the TrackPrep app for more practice: Get TrackPrep on Google Play
Related: Current Electricity: NEET notes and questions · NEET Physics chapter-wise notes and questions
Frequently asked questions
What are Kirchhoff's first and second laws?
The first (junction) rule says the total current entering a junction equals the total current leaving it. The second (loop) rule says the algebraic sum of potential changes around any closed loop is zero.
Kirchhoff's junction rule is based on which conservation law?
It is based on the conservation of charge. With steady currents, no charge piles up at a junction, so what flows in must flow out.
What is the balance condition of a Wheatstone bridge?
The bridge is balanced when R2/R1 = R4/R3 (NCERT form), that is, when the product of opposite arms is equal. Then no current flows through the galvanometer.
Last updated: 21 November 2026.
- chapter notes
- topic
- neet 2027
- physics
