Skip to content
TrackPrep

Current Electricity NEET Notes and Important Questions (Class 12 Physics)

Quick NEET revision of NCERT Class 12 Physics Chapter 3, Current Electricity. Crisp notes on current, Ohm's law, drift velocity and mobility, resistivity and temperature, power, emf and internal resistance, cells in series and parallel, Kirchhoff's rules and the Wheatstone bridge, plus 8 MCQs.

By Anmol Sharma18 min read

Cartoon student at a laptop: Current Electricity NEET notes and important questions, Class 12 Physics

Current Electricity: key highlights

Particulars Details
Class and chapter NCERT Class 12 Physics, Chapter 3
Unit Current Electricity
Key topics Electric current, Ohm's law and resistivity, drift velocity and mobility, limitations of Ohm's law, temperature dependence of resistivity, electrical power, emf and internal resistance, cells in series and parallel, Kirchhoff's rules, Wheatstone bridge
How NEET asks it numericals on drift speed, terminal voltage, temperature coefficient and bridges; statement-based on Ohm's law; match-the-column on units; assertion-reason on resistivity and temperature
Revision time 60-75 minutes for these notes

In one line: A steady field makes electrons drift slowly (vd = eEτ/m), which gives Ohm's law with ρ = m/ne²τ, and every circuit is then solved by two conservation rules: charge at junctions and energy around loops.

📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.

Table of contents

Download the NCERT PDF

Book Chapter Official PDF
NCERT Class 12 Physics Chapter 3: Current Electricity 📥 Download Current Electricity NCERT PDF (ncert.nic.in)

Read the official NCERT chapter alongside these notes. Every note and question on this page is based on it.

Short notes for quick revision

Electric current

  • Charges in motion form a current. Lightning is an unsteady current; a torch and a cell-driven clock have steady currents.
  • Steady current I = q/t; in general I = lim ΔQ/Δt as Δt → 0. q is the net charge (forward minus backward).
  • SI unit ampere (defined through magnetic effects). Domestic appliances: about 1 A; lightning: tens of thousands of amperes; nerves: microamperes.
  • Current is a scalar (I = j · ΔS); it does not obey vector addition even though it is drawn with an arrow.

Currents in conductors

  • In metals some electrons are practically free; in electrolytic solutions, both positive and negative ions move. Free charges also exist in the ionosphere.
  • With no field, electrons move randomly (thermal motion) and collide with fixed ions; there is no net current.
  • A field from charges +Q and −Q on the ends causes only a brief current; a cell or battery maintains a steady field and a steady current.

Ohm's law and resistivity

  • G.S. Ohm (1828): V = RI; unit of R is ohm (Ω) = 1 V A^-1. Ohm reasoned by analogy with heat conduction.
  • Doubling the length doubles R; halving the area doubles R: R = ρl/A, where ρ = resistivity (depends on material, temperature and pressure, not dimensions).
  • Current density j = I/A (A/m²), a vector along E.
  • Vector form of Ohm's law: E = ρj or j = σE, with conductivity σ = 1/ρ.

Drift of electrons and origin of resistivity

  • Acceleration a = −eE/m. Average time between collisions is the relaxation time τ.
  • Drift velocity vd = −eEτ/m: constant in time although electrons accelerate between collisions.
  • I = ne A |vd|, so j = (ne²τ/m) E, which is Ohm's law with σ = ne²τ/m and ρ = m/(ne²τ).
  • Electrons drift opposite to E, i.e. towards higher potential.
  • Example 3.1: copper, A = 1.0 × 10^-7 m², I = 1.5 A, n = 8.5 × 10^28 m^-3: vd ≈ 1.1 mm/s. This is about 10^-5 of the thermal speed of copper atoms (about 2 × 10^2 m/s at 300 K) and 10^-11 of the speed at which the field travels (3 × 10^8 m/s).
  • Example 3.2: current starts almost instantly because the field is set up throughout the circuit at nearly the speed of light; large currents arise because n is enormous (~10^29 m^-3); drift is superposed on large random velocities; paths are straight between collisions without a field and curved with a field.

Mobility

  • Mobility µ = |vd|/E = eτ/m. SI unit m²/V s (= 10^4 cm²/V s). Mobility is positive.
  • Carriers: electrons in metals; electrons and positive ions in an ionised gas; positive and negative ions in an electrolyte.

Limitations of Ohm's law

  • (a) V stops being proportional to I (good conductor at large currents).
  • (b) The V-I relation depends on the sign of V: for example, a diode.
  • (c) The relation is not unique: more than one V for the same I, for example GaAs.
  • V = IR defines resistance for any device; Ohm's law is the claim that R does not depend on V (linear I-V graph). Ohm's law is not a fundamental law of nature.

Resistivity of materials and temperature

  • Metals: 10^-8 to 10^-6 Ω m. Insulators (ceramic, rubber, plastics): 10^18 times or more greater. Semiconductors lie in between; their resistivity decreases with temperature and can be lowered by adding small amounts of suitable impurities.
  • ρT = ρ0[1 + α(T − T0)]: α = temperature coefficient of resistivity, dimension (temperature)^-1, positive for metals. Valid over a limited range; copper's graph deviates from a straight line well below 0 °C.
  • Nichrome (nickel, iron, chromium), manganin and constantan have very weak temperature dependence: used in standard resistors.
  • Why: ρ = m/ne²τ. In metals, n hardly changes and τ falls with temperature, so ρ rises. In insulators and semiconductors, n rises with temperature more than enough to compensate, so ρ falls.
  • Example 3.3: toaster, 75.3 Ω at 27 °C, 230 V and 2.68 A steady (85.8 Ω), α = 1.70 × 10^-4 °C^-1: steady temperature 847 °C.
  • Example 3.4: platinum thermometer 5 Ω (ice), 5.23 Ω (steam), 5.795 Ω (bath): t = 345.65 °C.

Electrical energy and power

  • Charge ΔQ falling through V loses potential energy IVΔt; collisions pass this energy to the lattice as heat.
  • P = IV = I²R = V²/R (ohmic loss); supplied by the source (chemical energy of a cell).
  • Power transmission: loss in cables Pc = P²Rc/V², so power is sent at very high voltage and a transformer steps it down for use.

Cells, emf and internal resistance

  • A cell has positive (P) and negative (N) electrodes in an electrolyte. emf ε = V+ + V−: the potential difference between the electrodes in open circuit (no current). emf is not a force.
  • The electrolyte has internal resistance r.
  • Terminal voltage while supplying current: V = ε − Ir; current I = ε/(R + r); maximum current Imax = ε/r (R = 0), though cells allow much less.
  • While a cell is being charged (current from P to N inside), V = ε + Ir.
  • Dry cells have much higher internal resistance than common electrolytic cells.

Cells in series and parallel

  • Series: εeq = ε1 + ε2, req = r1 + r2. If one cell is reversed (two negatives joined), εeq = ε1 − ε2.
  • Parallel: 1/req = 1/r1 + 1/r2, εeq/req = ε1/r1 + ε2/r2, i.e. εeq = (ε1r2 + ε2r1)/(r1 + r2), req = r1r2/(r1 + r2). Use −ε2 if a cell is reversed.

Kirchhoff's rules

  • Junction rule: sum of currents entering = sum leaving; based on conservation of charge (no accumulation at steady state).
  • Loop rule: algebraic sum of potential changes around a closed loop is zero; potential depends only on position (energy conservation).
  • If a solved current comes out negative, it flows opposite to the assumed arrow.
  • Example 3.5: cube of twelve 1 Ω resistors between diagonally opposite corners: Req = (5/6) R; with 10 V, total current 12 A, I = 4 A in each of the first three edges.
  • Example 3.6: I1 = 2.5 A, I2 = 5/8 A, I3 = 1⅞ A; branch CD carries 0 A.

Wheatstone bridge

  • Four resistors R1, R2, R3, R4; battery arm AC, galvanometer arm BD.
  • Balance (null) condition, Ig = 0: R2/R1 = R4/R3. Unknown resistance: R4 = R3 R2/R1.
  • The practical device using this principle is the meter bridge.
  • Example 3.7: AB = 100 Ω, BC = 10 Ω, CD = 5 Ω, DA = 60 Ω, galvanometer 15 Ω, 10 V: Ig = 4.87 mA.

Formula table

Formula Meaning of symbols When to use
I = ΔQ/Δt Net charge per unit time Definition of current
V = IR R in ohm Ohm's law
R = ρl/A ρ resistivity (Ω m), l length, A area Resistance from dimensions
j = I/A; j = σE; E = ρj σ = 1/ρ (S/m) Vector Ohm's law
vd = eEτ/m τ relaxation time Drift speed
I = neAvd n free electrons per m³ Current from drift
ρ = m/(ne²τ) m electron mass Origin of resistivity
µ = vd/E = eτ/m Unit m²/V s Mobility
ρT = ρ0[1 + α(T − T0)] α temperature coefficient (°C^-1) Resistance change with temperature
P = IV = I²R = V²/R Power in watt Heating, ohmic loss
Pc = P²Rc/V² Rc cable resistance Transmission loss
V = ε − Ir; I = ε/(R + r) r internal resistance Cell supplying current
εeq = ε1 + ε2; req = r1 + r2 Series cells Same direction
εeq/req = ε1/r1 + ε2/r2; 1/req = 1/r1 + 1/r2 Parallel cells Two cells side by side
R2/R1 = R4/R3 Bridge arms Balanced Wheatstone bridge

Dimensions: R [ML²T^-3A^-2], ρ [ML³T^-3A^-2], σ [M^-1L^-3T³A²], µ [M^-1T²A], j [L^-2A].

Important tables and comparisons

Temperature dependence of resistivity

Material Effect of rising T on n Effect on τ ρ with rising T
Metal (copper) Hardly changes Decreases Increases (α > 0)
Nichrome, manganin, constantan — — Very weak change
Semiconductor, insulator Increases strongly Decreases Decreases

Ways Ohm's law fails

Deviation Example
V not proportional to I Good conductor at large currents
Relation depends on sign of V Diode (rectifier)
More than one V for the same I GaAs

Cells in series vs parallel

Feature Series Parallel
Equivalent emf ε1 + ε2 (ε1r2 + ε2r1)/(r1 + r2)
Equivalent internal resistance r1 + r2 r1r2/(r1 + r2)
Cell reversed ε1 − ε2 Replace ε2 by −ε2

Speeds to compare (Example 3.1)

Quantity Order of value
Electron drift speed About 1 mm/s
Thermal speed of copper atoms About 2 × 10^2 m/s
Speed of the electric field along the wire 3 × 10^8 m/s

Diagrams to revise

  • Fig. 3.2: two slabs end to end double R; a slab cut lengthwise into halves doubles each half's R: R = ρl/A.
  • Fig. 3.3: electron path A to B with random collisions; with a field it ends at B′, a slight drift opposite to E.
  • Fig. 3.4: charge in a cylinder of unit area and length vd gives j.
  • Fig. 3.5-3.7: V-I curves: a good conductor (bends from linear), a diode (different for +V and −V), GaAs (non-unique).
  • Fig. 3.8-3.10: ρ vs T for copper (rises), nichrome (almost flat), semiconductor (falls).
  • Fig. 3.12: cell electrodes P and N, points A and B in the electrolyte; emf = V+ + V−.
  • Fig. 3.15 and 3.16: junction a (I3 = I1 + I2) and loops; the cube network.
  • Fig. 3.18: Wheatstone bridge with battery arm AC and galvanometer arm BD.

NEET traps in this chapter

  • ⚠️ Electrons drift opposite to E (towards higher potential); conventional current is along E.
  • ⚠️ Drift speed is tiny (mm/s), but the bulb glows almost at once because the field spreads at nearly the speed of light.
  • ⚠️ V = IR defines resistance; Ohm's law is only obeyed when R is independent of V.
  • ⚠️ Resistivity depends on material and temperature, not on length or area; resistance depends on all of them.
  • ⚠️ For semiconductors, resistivity falls with temperature because n rises; for metals it rises because τ falls.
  • ⚠️ Terminal voltage is ε − Ir while discharging but ε + Ir while charging.
  • ⚠️ emf is a potential difference, not a force.
  • ⚠️ Current is a scalar, even though it has a direction in a wire.
  • ⚠️ In a balanced bridge, no current flows through the galvanometer, so that arm can be removed.

Practice questions

Try each question, then check the answer key below. Get instant answers and explanations for more Current Electricity questions on TrackPrep.

Q1. A copper wire of cross-sectional area 1.0 × 10^-6 m² carries a current of 2.0 A. If the number density of free electrons is 8.5 × 10^28 m^-3, the drift speed is about

  • (A) 1.5 × 10^-2 m/s
  • (B) 1.5 × 10^-4 m/s
  • (C) 1.5 × 10^-3 m/s
  • (D) 3.0 × 10^8 m/s

👉 Solve this and more Current Electricity questions on TrackPrep

Q2. A cell of emf 12 V and internal resistance 0.5 Ω is connected to a 5.5 Ω resistor. The terminal voltage of the cell is

  • (A) 12 V
  • (B) 11.5 V
  • (C) 11 V
  • (D) 10 V

👉 Solve this and more Current Electricity questions on TrackPrep

Q3. A metal wire has a resistance of 50 Ω at 20 °C. If its temperature coefficient of resistance is 4 × 10^-3 °C^-1, its resistance at 70 °C is

  • (A) 52 Ω
  • (B) 64 Ω
  • (C) 70 Ω
  • (D) 60 Ω

👉 Solve this and more Current Electricity questions on TrackPrep

Q4. Nichrome, manganin and constantan are used in standard resistors because they

  • (A) have very low resistivity
  • (B) show a very weak dependence of resistivity on temperature
  • (C) are semiconductors
  • (D) do not obey Ohm's law

👉 Solve this and more Current Electricity questions on TrackPrep

Q5. Kirchhoff's junction rule is a consequence of the conservation of

  • (A) energy
  • (B) momentum
  • (C) charge
  • (D) mass

👉 Solve this and more Current Electricity questions on TrackPrep

Q6. How many of the following statements are correct?

  1. The relation V = IR defines resistance and can be applied to any conducting device.
  2. A diode obeys Ohm's law for both directions of voltage.
  3. GaAs can show more than one value of V for the same current.
  4. Ohm's law is a fundamental law of nature obeyed by all materials.
  5. Power loss in transmission cables is reduced by transmitting at high voltage.
  • (A) One
  • (B) Two
  • (C) Three
  • (D) Four

👉 Solve this and more Current Electricity questions on TrackPrep

Q7. Match List I (quantity) with List II (SI unit).

List I List II
A. Resistivity i. m² V^-1 s^-1
B. Mobility ii. A m^-2
C. Current density iii. Ω m
D. Relaxation time iv. s
  • (A) A-iii, B-ii, C-i, D-iv
  • (B) A-iii, B-i, C-ii, D-iv
  • (C) A-i, B-iii, C-ii, D-iv
  • (D) A-iv, B-i, C-ii, D-iii

👉 Solve this and more Current Electricity questions on TrackPrep

Q8. Assertion (A): The resistivity of a metal increases with temperature. Reason (R): The number density of free electrons in a metal increases strongly with temperature.

  • (A) Both A and R are true and R is the correct explanation of A.
  • (B) Both A and R are true but R is not the correct explanation of A.
  • (C) A is true but R is false.
  • (D) A is false but R is true.

👉 Solve this and more Current Electricity questions on TrackPrep

Answer key

Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
B C D B C C B C
  • Q1: vd = I/(neA) = 2.0/(8.5 × 10^28 × 1.6 × 10^-19 × 1.0 × 10^-6) ≈ 1.5 × 10^-4 m/s.
  • Q2: I = ε/(R + r) = 12/6 = 2 A; V = ε − Ir = 12 − 1 = 11 V.
  • Q3: R = 50[1 + 4 × 10^-3 × 50] = 50 × 1.2 = 60 Ω.
  • Q4: These alloys have a very weak dependence of resistivity on temperature, so their resistance hardly changes.
  • Q5: At steady state no charge accumulates at a junction, so the junction rule follows from charge conservation (the loop rule follows from energy).
  • Q6: Statements 1, 3 and 5 are correct. A diode's V-I relation depends on the sign of V, and Ohm's law is not a fundamental law of nature.
  • Q7: Resistivity Ω m, mobility m²/V s, current density A/m², relaxation time s.
  • Q8: In a metal, n hardly changes with temperature; ρ rises because the relaxation time τ falls. A is true, R is false.

Got one wrong? Ask Jojo, the AI teacher, to explain it on a whiteboard: ask your doubt on TrackPrep

Practise Current Electricity on TrackPrep

  • ✅ Page-wise NCERT MCQs for Current Electricity, with explanations
  • ✅ Chapter-wise PYQs
  • ✅ NCERT line-by-line lecture by Anmol Sir
  • ✅ Jojo, the AI teacher, for any doubt, in Hindi, English or Hinglish

👉 Start practising Current Electricity on TrackPrep

Previous chapter: Electrostatic Potential and Capacitance · Next chapter: Moving Charges and Magnetism · All chapters: NEET Physics chapter-wise notes and questions

Practise for NEET on the TrackPrep app: get it on Google Play

Deep dives for this chapter

Frequently asked questions

Is Current Electricity important for NEET 2027?

Yes. NEET Physics has 45 questions (180 marks), and Current Electricity gives direct numericals on drift speed, cells, Kirchhoff's rules and bridges. The same circuit skills are needed again in magnetism, AC and semiconductors.

Which topics of Current Electricity should I revise first?

Start with R = ρl/A, drift velocity and ρ = m/ne²τ. Then revise emf and internal resistance (V = ε − Ir), cell combinations, Kirchhoff's rules and the Wheatstone bridge balance condition.

How do I revise Current Electricity quickly before NEET?

Use the formula table and the temperature table above, then redo NCERT Examples 3.1, 3.3, 3.5 and 3.7. Read the traps list once, especially charging vs discharging terminal voltage and metals vs semiconductors.

Where can I practise more Current Electricity questions?

TrackPrep has page-wise NCERT MCQs and chapter-wise PYQs for Current Electricity, plus NTA-style CBT mock tests. If a circuit feels confusing, send a photo of it to Jojo, the AI teacher, for a step-by-step whiteboard solution.

What is current electricity in Class 12?

Current electricity is the study of charges in motion, which together form an electric current; in NCERT Class 12 Physics it is Chapter 3. The steady current through an area is I = q/t, where q is the net charge crossing it in time t, and its SI unit is the ampere. The chapter covers Ohm's law and resistivity, drift velocity and mobility, emf and internal resistance of cells, Kirchhoff's rules and the Wheatstone bridge.

What is the difference between current electricity and static electricity?

Static electricity (electrostatics) deals with charges at rest, while current electricity deals with charges in motion. In the first two chapters of Class 12 Physics all charges, free or bound, are treated as being at rest, and the current electricity chapter then studies steady flows of charge. Lightning is an example of an unsteady flow of charge, while a torch or a cell-driven clock has a steady current.

What causes current electricity to flow in a conductor?

A steady current flows when a cell or battery keeps a steady electric field across the conductor. Without a field, the free electrons in a metal move randomly and collide with fixed ions, so there is no net current. With a field they gain a small drift velocity, vd = −eEτ/m, opposite to the field, which is only about 1.1 mm/s for a copper wire carrying 1.5 A (Example 3.1), yet the current starts almost at once because the field is set up through the circuit at nearly the speed of light.

What is the difference between electric current and voltage?

Electric current is the rate of flow of charge through a conductor, measured in ampere, while voltage is the potential difference across it that drives this flow, measured in volt. Ohm's law links them as V = RI, where R is the resistance in ohm (1 Ω = 1 V A⁻¹). Doubling the length of a wire doubles R, so the same voltage then drives half the current.

Last updated: 21 November 2026.

Tags:
  • physics
  • class 12
  • neet 2027
  • notes
  • current electricity

← All articles