Moving Charges and Magnetism NEET Notes and Important Questions (Class 12 Physics)
Quick NEET revision of NCERT Class 12 Physics Chapter 4, Moving Charges and Magnetism: Lorentz force, circular and helical motion, Biot-Savart law, circular loop, Ampere's law, solenoid, parallel currents, torque on a loop, galvanometer, a formula table and 8 MCQs.
By Anmol Sharma23 min read

Moving Charges and Magnetism: key highlights
| Particulars | Details |
|---|---|
| Class and chapter | NCERT Class 12 Physics, Chapter 4 |
| Unit | Magnetic Effects of Current and Magnetism |
| Key topics | Lorentz force, motion of a charge in a magnetic field, Biot-Savart law, field of a circular loop, Ampere's circuital law, solenoid, force between parallel currents, torque on a current loop, moving coil galvanometer |
| How NEET asks it | numericals on r = mv/qB, B of wires, loops and solenoids, force between wires and galvanometer conversion; statement-based on Biot-Savart vs Coulomb; match-the-column on field formulas; assertion-reason on sensitivity |
| Revision time | 60-75 minutes for these notes |
In one line: Moving charges both feel (F = qv × B) and produce (Biot-Savart, Ampere) magnetic fields; because the force is always sideways it bends paths but never does work, and a current loop behaves exactly like a magnetic dipole m = NIA.
📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.
Table of contents
- Download the NCERT PDF
- Short notes for quick revision
- Important tables and comparisons
- Diagrams to revise
- NEET traps in this chapter
- Practice questions
- Answer key
- Practise Moving Charges and Magnetism on TrackPrep
- Frequently asked questions
Download the NCERT PDF
| Book | Chapter | Official PDF |
|---|---|---|
| NCERT Class 12 Physics | Chapter 4: Moving Charges and Magnetism | 📥 Download Moving Charges and Magnetism NCERT PDF (ncert.nic.in) |
Read the official NCERT chapter alongside these notes. Every note and question on this page is based on it.
Short notes for quick revision
Oersted's discovery
- In 1820, Oersted saw a current in a straight wire deflect a nearby compass needle. The needle aligns tangential to a circle centred on the wire, in a plane perpendicular to it.
- Reversing the current reverses the needle. Deflection increases with larger current or a closer needle. Iron filings form concentric circles.
- Conclusion: moving charges or currents produce a magnetic field.
- Maxwell (1864) unified electricity and magnetism and realised light is an electromagnetic wave.
- Convention: dot (⊙) = out of the page, cross (⊗) = into the page.
Magnetic field and Lorentz force
- Magnetic field B is a vector field; it obeys superposition (fields of several sources add as vectors).
- Lorentz force: F = q[E + v × B] = F(electric) + F(magnetic).
- Magnetic part q(v × B): depends on q, v and B; is opposite for a negative charge; is zero if v is parallel or antiparallel to B; is zero for a charge at rest; acts perpendicular to both v and B (right-hand / screw rule).
- Magnitude: F = qvB sin θ.
- Unit of B: tesla (T) = N s/(C m). 1 T: force of 1 N on 1 C moving at 1 m/s perpendicular to B. Gauss = 10⁻⁴ T (non-SI). Earth's field ≈ 3.6 × 10⁻⁵ T.
- Force on a straight conductor: F = I l × B (l along the current; current itself is not a vector). B here is the external field. For any shape, sum I dl × B.
- Example 4.1: 200 g wire, 1.5 m, 2 A held in mid-air: mg = IlB → B = 0.65 T.
- Example 4.2: v along +x, B along +y → v × B along +z: proton +z, electron −z.
Motion of a charge in a uniform magnetic field
- The magnetic force is perpendicular to velocity → no work is done, the speed (and kinetic energy) stays constant; only the direction changes.
- v ⊥ B: uniform circular motion. mv²/r = qvB → r = mv/qB (larger momentum, larger circle).
- Angular frequency ω = 2πν = qB/m, independent of speed or energy; this is used in the cyclotron (cyclotron frequency νc = qB/2πm). Period T = 2πm/qB.
- v has a component along B: that component is unchanged → helical path. Pitch p = v∥T = 2πm v∥/qB.
- Example 4.3: electron, v = 3 × 10⁷ m/s, B = 6 × 10⁻⁴ T → r ≈ 28 cm, ν ≈ 17 MHz, E ≈ 2.5 keV.
- Unlike qE, the magnetic force cannot change the energy of the particle.
Biot-Savart law
- Field of a current element: dB = (µ0/4π) I dl × r / r³; magnitude dB = (µ0/4π) I dl sin θ / r² (vacuum).
- µ0/4π = 10⁻⁷ T m/A; µ0 = 4π × 10⁻⁷ (permeability of free space).
- Direction: perpendicular to the plane containing dl and r.
- Field is zero along the line of dl (θ = 0).
- µ0ε0 = 1/c², c = 3 × 10⁸ m/s. Fixing µ0 fixes ε0.
- Example 4.4: Δl = 1 cm along x, I = 10 A, point 0.5 m on y-axis → dB = 4 × 10⁻⁸ T along +z.
Biot-Savart law vs Coulomb's law
- Similar: both long range (∝ 1/r²); both obey superposition; both are linear in the source.
- Different: electric field from a scalar source (charge); magnetic field from a vector source (I dl).
- Electric field is along r; magnetic field is perpendicular to the plane of dl and r.
- Biot-Savart has an angle dependence (sin θ); Coulomb's law does not.
Field of a circular current loop
- On the axis at distance x: B = µ0IR²/[2(x² + R²)^(3/2)], along the axis. Perpendicular components cancel in pairs.
- At the centre (x = 0): B = µ0I/2R; for N turns B = µ0NI/2R.
- Field lines form closed loops. Direction: curl the right-hand fingers along the current; the thumb gives B. One face acts as a north pole, the other as a south pole.
- Example 4.5: straight parts of a wire give zero field at the centre (dl ∥ r); a semicircular arc gives half the field of a full loop: 12 A, 2.0 cm → 1.9 × 10⁻⁴ T into the page. Bending it the other way reverses the direction.
- Example 4.6: 100 turns, R = 10 cm, 1 A → B = 6.28 × 10⁻⁴ T.
Ampere's circuital law
- ∮ B · dl = µ0 I, where I is the total current through the surface bounded by the loop; sign of I by the right-hand rule.
- Simplified form for symmetric cases (Amperian loop): BL = µ0Ie.
- Ampere's law is to Biot-Savart what Gauss's law is to Coulomb's law; it is not independent of Biot-Savart and holds for steady currents.
- It holds for any loop but is useful only with high symmetry (it cannot give µ0I/2R at the centre of a loop easily).
- Long straight wire: B = µ0I/2πr; field lines are concentric circles (cylindrical symmetry). Field ∝ I and ∝ 1/r; it is finite even for an infinite wire.
- Right-hand rule (wire): thumb along the current, fingers curl along B. The loop rule and the wire rule are two different right-hand rules (fingers and thumb swap roles).
- Example 4.7 (thick wire, radius a, uniform current): outside (r > a): B = µ0I/2πr (∝ 1/r); inside (r < a): B = µ0Ir/2πa² (∝ r); maximum at the surface.
The solenoid
- Long wire wound as a close helix with insulated (enamelled) turns; length >> radius.
- Field inside is uniform, strong and along the axis; field outside ≈ 0; field between neighbouring turns cancels.
- Ampere's law on rectangular loop abcd: Bh = µ0I(nh) → B = µ0nI, n = turns per unit length.
- A soft iron core inside gives a much larger field.
- Example 4.8: 500 turns, 0.5 m, 5 A → n = 1000/m, B = 6.28 × 10⁻³ T.
Force between parallel currents and the ampere
- Wire a makes Ba = µ0Ia/2πd at wire b; force on length L of b: Fba = µ0IaIbL/2πd; per unit length f = µ0IaIb/2πd.
- Fba = −Fab (consistent with Newton's third law for steady currents).
- Parallel currents attract; antiparallel currents repel (opposite of like charges repelling).
- Ampere (definition, 1946): the steady current in each of two very long, straight, parallel conductors of negligible cross-section, 1 m apart in vacuum, that produces a force of 2 × 10⁻⁷ N per metre of length. Measured with a current balance.
- 1 C = charge crossing a section in 1 s when the current is 1 A.
- Example 4.9: Earth's horizontal field 3.0 × 10⁻⁵ T (south to north), 1 A: current east to west → 3 × 10⁻⁵ N/m, downward; current south to north → zero force.
Torque on a current loop and magnetic dipole
- In a uniform field a current loop feels zero net force but a torque.
- Plane of loop along B: τ = IAB (maximum). General: τ = IAB sin θ, θ = angle between B and the normal (area vector).
- Magnetic moment m = IA (N turns: m = NIA); direction by the right-hand thumb rule. Unit A m² (or J/T), dimensions [L² A].
- τ = m × B (analogous to τ = p × E).
- m parallel to B: stable equilibrium; m antiparallel to B: unstable equilibrium. This is why a small magnet aligns with the field.
- Example 4.10: 100 turns, R = 10 cm, 3.2 A → B = 2 × 10⁻³ T at the centre, m = 10 A m²; in 2 T, initial torque 0, after 90° torque = 20 N m; angular speed after 90° = √(2mB/I) = 20 s⁻¹ (I = 0.1 kg m²).
- Example 4.11: a horizontal loop cannot be made to spin about a vertical axis by a uniform field (τ lies in the plane of the loop); stable orientation has A along B (maximum flux); a flexible loop becomes a circle to maximise area and flux.
- Loop as a dipole: far on the axis (x >> R): B = µ0 2m/4πx³; in the plane of the loop: B = µ0 m/4πx³. Same as an electric dipole with p → m and 1/ε0 → µ0.
- A magnetic dipole (current loop) is the most elementary magnetic element; magnetic monopoles are not known to exist. Electrons and protons also have an intrinsic magnetic moment.
Moving coil galvanometer
- Coil of many turns free to rotate in a uniform radial magnetic field; a cylindrical soft iron core makes the field radial and stronger.
- Radial field → sin θ = 1 → τ = NIAB. Spring gives restoring torque kφ (k = torsional constant).
- Equilibrium: kφ = NIAB → φ = (NAB/k) I.
- As a detector (Wheatstone bridge): zero at the middle of the scale.
- Cannot be used directly as an ammeter: it is very sensitive (full-scale deflection for ~µA) and has large resistance.
- Ammeter: small shunt rs in parallel; resistance RG rs/(RG + rs) ≈ rs.
- Voltmeter: large R in series; resistance RG + R ≈ R. Connected in parallel with the section; disturbance kept below about 1%.
- Current sensitivity φ/I = NAB/k. Voltage sensitivity φ/V = NAB/(kR).
- Doubling N doubles the current sensitivity, but R also roughly doubles, so the voltage sensitivity stays the same.
- Example 4.12: 3 V source, 3 Ω circuit: galvanometer of 60 Ω → 0.048 A; with a 0.02 Ω shunt → 0.99 A; ideal ammeter → 1.00 A.
Formula table
| Formula | Meaning of symbols | When to use |
|---|---|---|
F = q(E + v × B) |
q charge, v velocity, B field (T) | Lorentz force |
F = qvB sin θ |
θ angle between v and B | Magnetic force on a charge |
F = I l × B, F = IlB sin θ |
l length along current | Force on a straight wire |
r = mv/qB |
m mass, v speed ⊥ B | Radius of circular path |
ω = qB/m, ν = qB/2πm, T = 2πm/qB |
independent of speed | Cyclotron frequency, period |
p = 2πm v∥/qB |
v∥ component along B | Pitch of helix |
dB = (µ0/4π) I dl sin θ / r² |
µ0/4π = 10⁻⁷ T m/A | Biot-Savart law |
B = µ0IR²/2(x² + R²)^(3/2) |
R loop radius, x axial distance | Axis of a circular loop |
B = µ0NI/2R |
N turns | Centre of a circular coil |
∮ B · dl = µ0I or BL = µ0Ie |
Ie enclosed current | Ampere's circuital law |
B = µ0I/2πr |
r distance from wire | Long straight wire (outside) |
B = µ0Ir/2πa² |
a wire radius, r < a | Inside a thick wire |
B = µ0nI |
n turns per metre | Long solenoid |
f = µ0IaIb/2πd |
d separation | Force per length, parallel wires |
m = NIA, τ = m × B = NIAB sin θ |
A area, θ between m and B | Torque on a coil |
B = µ0 2m/4πx³ (axis), µ0 m/4πx³ (plane) |
x >> R | Loop as a magnetic dipole |
φ = (NAB/k) I |
k torsional constant (N m/rad) | Galvanometer deflection |
φ/I = NAB/k, φ/V = NAB/kR |
R galvanometer resistance | Current and voltage sensitivity |
Units and dimensions (NCERT table)
| Quantity | Nature | Dimensions | Unit |
|---|---|---|---|
| Permeability µ0 | Scalar | [M L T⁻² A⁻²] | T m A⁻¹ (4π × 10⁻⁷) |
| Magnetic field B | Vector | [M T⁻² A⁻¹] | tesla (T) |
| Magnetic moment m | Vector | [L² A] | A m² or J/T |
| Torsion constant k | Scalar | [M L² T⁻²] | N m rad⁻¹ |
Important tables and comparisons
Magnetic field of common current shapes
| Source | Field | Direction rule |
|---|---|---|
| Long straight wire, distance r | µ0I/2πr | Thumb along current, fingers give B |
| Centre of circular coil (N turns) | µ0NI/2R | Fingers along current, thumb gives B |
| Centre of a semicircular arc | µ0I/4R (half of a loop) | Same as loop |
| Long solenoid (inside) | µ0nI, uniform; ≈ 0 outside | Right-hand rule |
| Inside a thick wire (r < a) | µ0Ir/2πa² (∝ r) | Tangential circles |
Electric force vs magnetic force on a charge
| Feature | Electric force qE | Magnetic force q(v × B) |
|---|---|---|
| Acts on a charge at rest | Yes | No |
| Direction | Along E | Perpendicular to v and B |
| Work done | Can be non-zero | Always zero |
| Changes speed | Can | Never (only direction) |
Galvanometer as ammeter vs voltmeter
| Feature | Ammeter | Voltmeter |
|---|---|---|
| Extra resistance | Small shunt rs | Large R |
| How attached to G | In parallel | In series |
| Total resistance | ≈ rs (very small) | ≈ R (very large) |
| How connected in the circuit | In series | In parallel |
Stable vs unstable equilibrium of a dipole in B
| Orientation | Torque | Equilibrium |
|---|---|---|
| m parallel to B (θ = 0) | Zero | Stable |
| m antiparallel to B (θ = 180°) | Zero | Unstable |
| m perpendicular to B (θ = 90°) | Maximum, mB | Not in equilibrium |
Diagrams to revise
- Fig. 4.1 (Oersted): compass needles tangential to circles around the wire; reversing current reverses them; iron filings in concentric circles.
- Fig. 4.2 (force on a charge): F perpendicular to v and B by the right-hand rule; +q and −q deflect opposite ways.
- Fig. 4.5 and 4.6: v ⊥ B gives a circle; a component along B gives a helix with pitch p.
- Fig. 4.7 (Biot-Savart): dB perpendicular to the plane of dl and r; zero along the dashed line of dl.
- Fig. 4.9 and 4.10 (circular loop): perpendicular components cancel, only the axial component survives; field lines are closed loops, one face like a north pole.
- Fig. 4.13 and 4.14 (thick wire): Amperian loops 1 (inside) and 2 (outside); B rises linearly up to r = a, then falls as 1/r.
- Fig. 4.15 and 4.16 (solenoid): uniform strong field inside at P, weak field outside at Q; rectangular Amperian loop abcd.
- Fig. 4.17 (parallel wires): field of a at b points downward; force on b is towards a (attraction).
- Fig. 4.18 and 4.19 (rectangular loop): forces on AB and CD form a couple; τ = IAB sin θ.
- Fig. 4.20-4.22 (galvanometer): coil, radial field, soft iron core, spring; shunt in parallel for an ammeter, large series R for a voltmeter.
NEET traps in this chapter
- ⚠️ The magnetic force does no work; a charge in a pure magnetic field keeps the same speed and kinetic energy.
- ⚠️ The time period and frequency of circular motion do not depend on speed or radius; only the radius grows with momentum.
- ⚠️ A charge moving along the field line feels no magnetic force.
- ⚠️ Parallel currents attract, antiparallel repel; this is the opposite of the charge rule.
- ⚠️ Inside a thick uniform wire B ∝ r; outside B ∝ 1/r; B is zero only at the centre.
- ⚠️ Field outside an ideal long solenoid ≈ 0; inside it is µ0nI and does not depend on the radius.
- ⚠️ In τ = NIAB sin θ, θ is measured from the normal to the coil, not from its plane: torque is maximum when the plane is along B.
- ⚠️ Doubling the turns doubles current sensitivity but not voltage sensitivity (resistance doubles too).
- ⚠️ Ammeter = small shunt in parallel; voltmeter = large resistance in series. Do not swap them.
Practice questions
Try each question, then check the answer key below. Get instant answers and explanations for more Moving Charges and Magnetism questions on TrackPrep.
Q1. A proton (m = 1.67 × 10⁻²⁷ kg, q = 1.6 × 10⁻¹⁹ C) moves at 2.0 × 10⁶ m/s perpendicular to a uniform magnetic field of 0.5 T. The radius of its circular path is about
- (A) 4.2 mm
- (B) 2.1 cm
- (C) 4.2 cm
- (D) 42 cm
👉 Solve this and more Moving Charges and Magnetism questions on TrackPrep
Q2. A long solenoid of length 0.5 m has 1000 turns and carries a current of 2 A. The magnetic field inside it is about (µ0 = 4π × 10⁻⁷ T m/A)
- (A) 2.5 × 10⁻³ T
- (B) 5.0 × 10⁻³ T
- (C) 1.0 × 10⁻² T
- (D) 5.0 × 10⁻⁴ T
👉 Solve this and more Moving Charges and Magnetism questions on TrackPrep
Q3. Two long, straight, parallel wires 10 cm apart in vacuum each carry 5 A in the same direction. The force per unit length between them is
- (A) 5 × 10⁻⁵ N/m, repulsive
- (B) 2.5 × 10⁻⁵ N/m, attractive
- (C) 5 × 10⁻⁴ N/m, attractive
- (D) 5 × 10⁻⁵ N/m, attractive
👉 Solve this and more Moving Charges and Magnetism questions on TrackPrep
Q4. A charged particle moves in a circle in a uniform magnetic field. If its speed is doubled, its time period of revolution
- (A) doubles
- (B) becomes half
- (C) remains the same
- (D) becomes four times
👉 Solve this and more Moving Charges and Magnetism questions on TrackPrep
Q5. A long straight wire of radius a carries a steady current uniformly spread over its cross-section. Inside the wire (r < a), the magnetic field
- (A) is zero everywhere
- (B) is proportional to r
- (C) is proportional to 1/r
- (D) is uniform and equal to its value at the surface
👉 Solve this and more Moving Charges and Magnetism questions on TrackPrep
Q6. How many of the following statements comparing the Biot-Savart law with Coulomb's law are correct?
- Both fields depend inversely on the square of the distance from the source.
- The magnetic field is produced by a scalar source, the current element.
- The magnetic field due to a current element is perpendicular to the plane containing dl and r.
- The Biot-Savart law has an angle dependence that is absent in the electrostatic case.
- The magnetic field at a point on the line of the current element is maximum.
- (A) One
- (B) Two
- (C) Three
- (D) Four
👉 Solve this and more Moving Charges and Magnetism questions on TrackPrep
Q7. Match List I with List II.
| List I | List II |
|---|---|
| A. Field at the centre of a circular loop | i. µ0nI |
| B. Field of a long straight wire at distance r | ii. µ0I/2R |
| C. Field inside a long solenoid | iii. NAB/k |
| D. Current sensitivity of a galvanometer | iv. µ0I/2πr |
- (A) A-iv, B-ii, C-i, D-iii
- (B) A-ii, B-iv, C-i, D-iii
- (C) A-ii, B-iv, C-iii, D-i
- (D) A-i, B-iv, C-ii, D-iii
👉 Solve this and more Moving Charges and Magnetism questions on TrackPrep
Q8. Assertion (A): Doubling the number of turns of a galvanometer coil always doubles its voltage sensitivity. Reason (R): The current sensitivity of a galvanometer, NAB/k, is proportional to the number of turns N.
- (A) Both A and R are true and R is the correct explanation of A.
- (B) Both A and R are true but R is not the correct explanation of A.
- (C) A is true but R is false.
- (D) A is false but R is true.
👉 Solve this and more Moving Charges and Magnetism questions on TrackPrep
Answer key
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 |
|---|---|---|---|---|---|---|---|
| C | B | D | C | B | C | B | D |
- Q1: r = mv/qB = (1.67 × 10⁻²⁷ × 2.0 × 10⁶)/(1.6 × 10⁻¹⁹ × 0.5) = 3.34 × 10⁻²¹/8.0 × 10⁻²⁰ ≈ 0.042 m = 4.2 cm.
- Q2: n = 1000/0.5 = 2000 per m; B = µ0nI = 4π × 10⁻⁷ × 2000 × 2 ≈ 5.0 × 10⁻³ T.
- Q3: f = µ0IaIb/2πd = 2 × 10⁻⁷ × 5 × 5/0.1 = 5 × 10⁻⁵ N/m; currents in the same direction attract.
- Q4: T = 2πm/qB does not contain v; a faster particle moves in a bigger circle in the same time.
- Q5: Enclosed current is Ir²/a², so B = µ0Ir/2πa², which is proportional to r.
- Q6: Statements 1, 3 and 4 are correct. The source I dl is a vector, and the field along the line of dl is zero (sin 0 = 0).
- Q7: µ0I/2R, µ0I/2πr, µ0nI and NAB/k.
- Q8: R is true, but doubling N also roughly doubles the coil's resistance, so the voltage sensitivity NAB/(kR) stays the same; A is false.
Got one wrong? Ask Jojo, the AI teacher, to explain it on a whiteboard: ask your doubt on TrackPrep
Practise Moving Charges and Magnetism on TrackPrep
- ✅ Page-wise NCERT MCQs for Moving Charges and Magnetism, with explanations
- ✅ Chapter-wise PYQs
- ✅ NCERT line-by-line lecture by Anmol Sir
- ✅ Jojo, the AI teacher, for any doubt, in Hindi, English or Hinglish
👉 Start practising Moving Charges and Magnetism on TrackPrep
Previous chapter: Current Electricity · Next chapter: Magnetism and Matter · All chapters: NEET Physics chapter-wise notes and questions
Frequently asked questions
Is Moving Charges and Magnetism important for NEET 2027?
Yes. NEET Physics has 45 questions (180 marks), and this chapter gives frequent numericals on r = mv/qB, the fields of wires, loops and solenoids, and galvanometer conversion. Its ideas of magnetic moment and torque continue in Magnetism and Matter and Electromagnetic Induction.
Which topics of Moving Charges and Magnetism should I revise first?
Start with the Lorentz force and r = mv/qB, then the field formulas: µ0I/2R, µ0I/2πr and µ0nI. After that, revise the force between parallel wires, τ = NIAB sin θ and the ammeter and voltmeter conversion of a galvanometer.
How do I revise Moving Charges and Magnetism quickly before NEET?
Use the formula table and the field-of-common-shapes table above, then solve NCERT Examples 4.3, 4.7, 4.10 and 4.12. Read the traps list once, especially the two right-hand rules and the angle in the torque formula.
Where can I practise more Moving Charges and Magnetism questions?
TrackPrep has page-wise NCERT MCQs and chapter-wise PYQs for Moving Charges and Magnetism, plus NTA-style CBT mock tests. If a direction problem confuses you, send a photo of it to Jojo, the AI teacher, for a step-by-step whiteboard solution.
What is Moving Charges and Magnetism in Class 12?
Moving Charges and Magnetism is Chapter 4 of NCERT Class 12 Physics, and it studies how moving charges (currents) produce magnetic fields and how magnetic fields push on moving charges. It starts from Oersted's 1820 discovery that a current in a wire deflects a nearby compass needle. It covers the Lorentz force, motion of a charge in a magnetic field, the Biot-Savart law, Ampere's circuital law, the solenoid, force between parallel currents, torque on a current loop and the moving coil galvanometer.
What is B in Moving Charges and Magnetism?
B is the magnetic field, a vector field whose SI unit is the tesla (T); a non-SI unit, the gauss, equals 10⁻⁴ T. It is defined through the magnetic force on a moving charge, F = q(v × B), with magnitude qvB sin θ, so 1 T is the field that exerts 1 N on a charge of 1 C moving at 1 m/s perpendicular to it. The earth's magnetic field is about 3.6 × 10⁻⁵ T.
What is pitch in Moving Charges and Magnetism?
Pitch is the distance a charged particle moves along the magnetic field in one rotation when it follows a helical path. This happens when the velocity has a component v∥ along B: the perpendicular part makes the particle go round in a circle, while v∥ stays unchanged and carries it forward. So the pitch is p = v∥T = 2πm v∥/qB, where T = 2πm/qB is the period of rotation.
Is Moving Charges and Magnetism related to Current Electricity?
Yes, it builds directly on Current Electricity, because an electric current is simply charges in motion. Moving Charges and Magnetism shows that these currents produce magnetic fields (Oersted's experiment, Biot-Savart law, Ampere's law) and that a current-carrying conductor feels a force F = I l × B in an external field. Current and resistance from Current Electricity are used again in the moving coil galvanometer, which becomes an ammeter with a small shunt resistance in parallel or a voltmeter with a large resistance in series.
Last updated: 21 November 2026.
- physics
- class 12
- neet 2027
- notes
- moving charges and magnetism
