Resistance vs Resistivity: Difference, Formula, Units and NEET Numericals
Resistance depends on the material and the size of a conductor; resistivity depends only on the material (and temperature). This NCERT-based guide compares them in tables, explains R = ρl/A, solves NCERT numericals by formula, covers the stretched-wire trap and ends with 5 MCQs.
By Anmol Sharma8 min read

Resistance vs resistivity: key highlights
| Particulars | Resistance (R) | Resistivity (ρ) |
|---|---|---|
| NCERT source | Class 12 Physics, Chapter 3 (Current Electricity), section 3.4 | Same section, and 3.8 (temperature) |
| Depends on | Material and dimensions (length, area) | Material only (and temperature, pressure) |
| Formula | R = V/I, and R = ρl/A | ρ = RA/l |
| SI unit | ohm (Ω); 1 Ω = 1 V A⁻¹ | ohm metre (Ω m) |
| Changes when a wire is stretched? | Yes | No |
| Metals | Depends on the wire | 10⁻⁸ Ω m to 10⁻⁶ Ω m (NCERT) |
In one line: Resistance is the opposition of a particular conductor to current and depends on its material, length and area (R = ρl/A), while resistivity is a property of the material alone, so cutting or stretching a wire changes its resistance but not its resistivity, unless the temperature changes.
📲 Get the TrackPrep app on Google Play: practise, take mocks and ask Jojo on your phone.
Table of contents
- How NCERT derives the resistance formula
- Difference between resistance and resistivity in tabular form
- Effect of temperature on resistivity
- Solved numericals
- NEET traps to remember
- Practice MCQs
- Answer key
- Practise on TrackPrep
- Frequently asked questions
How NCERT derives the resistance formula
Ohm's law says V = RI, where R is the resistance. NCERT notes that R depends not only on the material but also on the dimensions of the conductor, and shows it with identical slabs:
| Change to the slab | What happens | Conclusion |
|---|---|---|
| Two slabs end to end (length 2l) | Same current, voltage 2V, so resistance 2R | R ∝ l |
| Slab cut lengthwise (area A/2) | Same voltage, current I/2 in each half, so resistance 2R | R ∝ 1/A |
| Combine both | — | R = ρl/A |
Here ρ (resistivity) is the constant that depends on the material but not on its dimensions.
Related quantities (also in NCERT)
- Current density: j = I/A (unit A/m²).
- Ohm's law in field form: E = ρj, or j = σE.
- Conductivity: σ = 1/ρ.
- From electron drift: σ = ne²τ/m, so ρ = m/(ne²τ). Resistivity depends on the number density of free electrons (n) and the average time between collisions (τ), both properties of the material and its temperature.
Difference between resistance and resistivity in tabular form
| Basis | Resistance | Resistivity |
|---|---|---|
| Meaning | Opposition of a given conductor to current | Property of the material of the conductor |
| Symbol | R | ρ (rho) |
| Formula | R = V/I = ρl/A | ρ = RA/l = m/(ne²τ) |
| SI unit | Ω (V A⁻¹) | Ω m |
| Depends on length? | Yes, R ∝ l | No |
| Depends on area? | Yes, R ∝ 1/A | No |
| Depends on material? | Yes | Yes |
| Depends on temperature? | Yes | Yes |
| Two wires of same metal, different sizes | Different R | Same ρ |
| Reciprocal | Conductance (not needed here) | Conductivity σ = 1/ρ |
The stretched-wire rule
When a wire is stretched, its volume stays the same (l × A is constant).
- Length becomes n times → area becomes 1/n times.
- So R = ρl/A becomes n² times. Resistivity does not change.
| Change | New resistance | Resistivity |
|---|---|---|
| Length doubled by stretching | 4R | Same |
| Length tripled by stretching | 9R | Same |
| Wire cut into two equal halves | R/2 each | Same |
| Temperature of a metal wire raised | Increases | Increases |
Effect of temperature on resistivity
NCERT gives, for a metallic conductor over a limited temperature range:
ρT = ρ0 [1 + α (T – T0)], where α is the temperature coefficient of resistivity, with dimension (temperature)⁻¹.
| Material | How ρ changes with temperature | Reason (NCERT) |
|---|---|---|
| Metals | Increases (α positive) | n stays almost constant; τ decreases as collisions become more frequent |
| Semiconductors, insulators | Decreases | n increases more than enough to make up for the fall in τ |
| Nichrome, manganin, constantan | Changes very little | Used in wire-bound standard resistors |
- Metals: resistivity in the range 10⁻⁸ Ω m to 10⁻⁶ Ω m.
- Semiconductors lie roughly in the middle on a logarithmic scale; their resistivity can be lowered by adding small amounts of suitable impurities.
Solved numericals
All values below are recomputed from the formulas.
1. NCERT Exercise 3.4: A wire of length 15 m and cross-section 6.0 × 10⁻⁷ m² has resistance 5.0 Ω. Find ρ.
- ρ = RA/l = (5.0 × 6.0 × 10⁻⁷)/15 = 2.0 × 10⁻⁷ Ω m
2. NCERT Exercise 3.3: A heating element has R = 100 Ω at 27.0 °C and 117 Ω at the working temperature; α = 1.70 × 10⁻⁴ °C⁻¹.
- 117 = 100 [1 + 1.70 × 10⁻⁴ (T – 27)]
- T – 27 = 0.17/(1.70 × 10⁻⁴) = 1000 → T = 1027 °C
3. NCERT Exercise 3.5: A silver wire is 2.1 Ω at 27.5 °C and 2.7 Ω at 100 °C. Find α.
- α = (2.7 – 2.1)/(2.1 × 72.5) ≈ 3.94 × 10⁻³ °C⁻¹
4. Stretched wire: A 10 Ω wire is stretched to double its length.
- New R = 2² × 10 = 40 Ω; resistivity unchanged.
NEET traps to remember
- Unit of resistivity is Ω m, not Ω/m.
- Cutting or stretching changes R, never ρ (at constant temperature).
- Stretching to n times length gives n² times resistance, not n times.
- Metals: ρ rises with temperature; semiconductors: ρ falls.
- Nichrome is chosen for weak temperature dependence, not for zero resistivity.
- ρ = m/(ne²τ): fewer collisions (larger τ) means lower resistivity.
Practice MCQs
1. The SI unit of resistivity is: (a) Ω (b) Ω m⁻¹ (c) Ω m (d) Ω m²
👉 Solve this and more Current Electricity questions on TrackPrep
2. A wire of resistance R is stretched so that its length becomes 3 times. Its new resistance and resistivity are: (a) 3R, same (b) 9R, same (c) 9R, 9 times (d) R/3, same
👉 Solve this and more Current Electricity questions on TrackPrep
3. Resistivity of a metal depends on: (a) Length of the wire (b) Area of cross-section (c) Material and temperature (d) Current through it
👉 Solve this and more Current Electricity questions on TrackPrep
4. A wire 15 m long with area 6.0 × 10⁻⁷ m² has resistance 5.0 Ω. Its resistivity is: (a) 2.0 × 10⁻⁷ Ω m (b) 5.0 × 10⁻⁷ Ω m (c) 2.0 × 10⁻⁶ Ω m (d) 4.5 × 10⁻⁶ Ω m
👉 Solve this and more Current Electricity questions on TrackPrep
5. As temperature increases, the resistivity of a semiconductor: (a) Increases because τ decreases (b) Decreases because n increases (c) Stays constant (d) Increases because n decreases
👉 Solve this and more Current Electricity questions on TrackPrep
Answer key
| Q | Answer | Why |
|---|---|---|
| 1 | (c) | ρ = RA/l gives Ω × m²/m = Ω m |
| 2 | (b) | Volume constant, so R ∝ l²: 3² = 9; ρ is a material property |
| 3 | (c) | NCERT: ρ depends on the material (and temperature), not dimensions |
| 4 | (a) | ρ = (5.0 × 6.0 × 10⁻⁷)/15 = 2.0 × 10⁻⁷ Ω m |
| 5 | (b) | For semiconductors, n increases with temperature more than τ falls |
Practise on TrackPrep
- ✅ Page-wise NCERT MCQs for Current Electricity, including every Example and Exercise type
- ✅ Chapter-wise and year-wise PYQs on resistivity, drift speed and temperature dependence
- ✅ Jojo, the AI teacher: send a photo of a numerical and get it solved step by step on a whiteboard
- ✅ Custom tests to drill only "stretched wire" and "temperature coefficient" questions
👉 Start practising free on TrackPrep
📲 Download the TrackPrep app for more practice: Get TrackPrep on Google Play
Related: Current Electricity: NEET notes and questions · Kirchhoff's laws and Wheatstone bridge numericals · NEET Physics chapter-wise notes and questions
Frequently asked questions
What is the difference between resistance and resistivity?
Resistance is the opposition of a particular conductor to current and depends on its material, length and area. Resistivity is a property of the material alone, given by ρ = RA/l, and does not change with the size of the wire.
What is the SI unit of resistivity?
The SI unit of resistivity is the ohm metre (Ω m). The unit of resistance is the ohm (Ω), where 1 Ω = 1 V A⁻¹.
Does resistivity change when a wire is stretched?
No. Stretching changes the length and area, so resistance changes (n² times for n times the length), but resistivity stays the same at the same temperature.
Why does the resistivity of a metal increase with temperature?
In a metal, the number of free electrons hardly changes with temperature, but electrons collide more often, so the average time between collisions falls. Since ρ = m/(ne²τ), resistivity rises.
Last updated: 21 November 2026.
- chapter notes
- difference between
- neet 2027
- physics
